84 / 208
ptreeusa.com
find even more at
order by phone (toll free) at
1-888-512-9069
84
A necessity for the safety-conscious woodworker. The yellow Board Mates® main-
tain simultaneous, even pressure against the table top and fence, all the while the
wheels rotate clockwise and lock in the opposite direction so you can feed your
stock through the blade while greatly reducing the chance for kick-back on your
tablesaw or router table. The red Board Mates® duplicate that action, however they
produce that action in the opposite direction for use on your radial arm saw. The
green Board Mates® rotate freely in both directions at the same time providing the
necessary downward pressure to keep your stock in place while using your shaper.
The heavy duty springs are adjustable for virtually any thickness of wood on any of
the three sets. Peachtree has designedmounting blocks for easy installation and use
on your fence (tablesaw / router / shaper versions). The blocks attach to the under-
side of the Board Mate®, which allows for easy side to side placement of the Board
Mates® along the top of your fence.
1235
tablesaw Board Mates® (yellow)
.............................................................................
$39.99
1530
1 pair of tablesaw wheels (yellow)
.........................................................................
$20.99
1237
router / shaper Board Mates® (green)
...................................................................
$39.99
1531
1 pair of router shaper wheels (green)
.................................................................
$20.99
1236
radial arm saw Board Mates® (red)
.........................................................................
$39.99
1532
1 pair of radial arm saw wheels (red)
.....................................................................
$20.99
1144
Board Mates® Mounting Blocks
(for standard 1/4”x20 track) 1 pair
.............................
$10.99
Board Mates®
Tablesaw
Board Mates
Choose the right Board Mate
set for your machine
Radial Arm Saw
Board Mates
Shaper
Board Mates
A-line-it Precision Alignment System
Tune-up Your Tablesaw
Five Position
Adjustment
Precision
Alignment
The A-Line-It
Shown here
Link Belt / Pulleys
Table Saw Pals
When aligning a Contractor Saw, nothing will make the job as easy as our
PALS
(Precison Alignment and Locking System)
kit. It provides you with a simple way
to get the rear trunnion perfectly aligned using a pair of “micro-adjusting”
screws at the ends of the rear trunnion.The PALS will allow you to align your
saw perfectly in a fewminutes of your time with little effort.
3154
5/16”Pals kit
................................................................................................
$20.99
3155
3/8”Pals kit
..................................................................................................
$20.99
3156
8mm Pals kit
................................................................................................
$20.99
Power-Twist link-belts run much smoother than conventional drive belts,
and as a result, absorb vibration. The belt easily adjusts to length (in 3/4”
increments), without tools. The Contractor Saw Performance Package in-
cludes two machined pulleys and a 4’ belt. Replacing your old cast pulley,
you reduce up to 95% of the vibration.
3165
1/2”link belt (12”section)
........................................................................
$10.99
3166
3/8”link belt (12”section)
.......................................................................
$10.99
1240
1/2”link belt (4’section)
...........................................................................
$39.99
1238
Delta
™
pulleys w/ belt
...............................................................................
$59.99
1239
Sears
™
pulleys w/belt
................................................................................
$59.99
1227
Delta
™
pulley set
........................................................................................
$27.99
1229
Sears
™
pulley set
........................................................................................
$27.99
When considering an Alignment tool for your machines, you really should
give this outstanding kit a serious look. The A-line-it comes with a 3/4” x
3/8” guide bar that fits into your miter slot on your table saw. Adjustable
spring plungers insure a perfect fit. By sliding the A-line-it up and down on
your miter slot you can check and align your sawblade perfectly to your mi-
ter slot. Once you have your blade properly aligned you can then set your
saw fence to the blade in seconds (with in .001”). The Deluxe Kit is the same
as the A-line-it along with the extra long set up bar and 22 different tips
for the dial gauge. Steel rods for use on drill press, router and more. Comes
with a lock nut - plus a spring for checking run-out of the arbor on the saw.
The dial indicator reads in .001”(one thousandth) of an inch increments for
absolute precision. The A-Line-It can be configured to perform many tests
on the equipment in your shop in just a couple of minutes.
3157
A-line-it Kit..........................................................................................................
$79.99
3158
Deluxe A-line-it Kit.......................................................................................
$144.99
Give your projects a custom look by making your own moldings. No more messing
with all those clamps to secure your jigs to your saw.The systemuses your miter slots
to secure the the cove jig to your table saw, or use four 30mmMagswitch™magnets
(not included). This unique design allows for fast easy set up for stock 7” wide and
1½”thick. By angling your table sawblade it will create elliptical coves that youwon’t
find in lumber centers. The Cove Cutting Tablesaw Jig includes a featherboard hold
down, 4 miter slot locking devices and all the necessary hardware.
1533
cove cutting jig.................................................................................................................
$69.99
3144
30mmMagswitch™ magnet.......................................................................................
$36.99
Cove Cutting Tablesaw Jig
Precisely Align Your
Contractor Saw
for Terrific Cuts
Everytime!
Tablesaw Accessories
Note: On imported saws, there are different PALS kits for some models of the same saw,
depending on when the saw was manufactured.To insure you order the right PALS kit, we
recommend that you look at the manual for your saw to determine the correct bolt size.
Trunion NOT
included
Straighten out
your crooked
boards
General® EZ Pro Jointer Clamp Kit
Generals E-Z Jointer Clamp Kit is the long-awaited alternative to expensive joint-
ers. Now, you can straight-line rip crooked boards using your table saw! Attach your
crooked board to a piece of straight stock using the Jointer Clamps and run the
stock along the rip fence to rip the crooked board. The Jointer Clamp works in two
easy passes and is great for use with long stock. Additionally, the patented swing
arm design allows you to accurately rip wide boards with ease..
20872
.................................................................................................................................................
$18.99