87 / 208
Your One Stop Supply Shop”
87
Microjig GRR-Ripper
Microjig GRR-Ripper 100
GRR-Ripper 100 Upgrade Kit
GRR-Ripper Instructional DVD
Microjig GRR-Ripper 200
Microjig Gravity Heels
GRR-Ripper Replacement Legs
Handle Bridge and Connector
Control your stockandkeepyour fingersoutof harmsway
The splitter is a low profile splitter that also serves as
a mini feather board for the keeper piece behind the
saw blade. It is designed to be used on a Zero Clear-
ance Insert (ZCI). The MJ Splitter features a simple in-
stallation and provides alignment surfaces of different
thicknesses and density’s of wood.
1376
Standard Kerf (1⁄8”) Green
forstandardkerfblades
$24.99
1378
Thin Kerf (3⁄32”) Yellow
forthinkerfblades
...............
$24.99
1380
Splitter Combo Pack -
includes:#1376and#1378
..
$44.99
The GRR-Ripper feeds the work piece, as the saw blade or router bit passes through either it’s
right side or left side tunnel. It uses grooved non-slip pads to feed, grip and hold down your work
through the cutting element. This give you unparalleled control over your stock as your running
through the cut. You control both sides of your workpiece, all the while your fingers stay safely
away from the cutter. The GRR-Ripper is also compatible with a series of useful accessories to
make cuts on other machines like bandsaws, router tables, jointers and more.
The GRR-Ripper 100 model is the basic model in the
Gripper series. It comes with a 1/4” leg for super thin
cuts. Also included are the 1/2” and 3/4” legs for vari-
ous width cuts. The 3/4” leg is completely adjustable
for any width cut. A stabilizing leg keeps the GRR-
Ripper steady when cutting taller stock. Buy a second
Gripper so when you have to cut anything longer than
16 inches you have a second GRRipper on hand so
you can “daisy chain” your stock through the cutter or
blade in a safe and controlled manner.
Convert your GRR-Ripper 100 into a GRR-Ripper 200
with easy to assemble kit. The kit includes an extra
outside leg that gives you more gripping power for
larger stock and also can be raised up for offset router
cuts. Also included is the large stabilizing pad that can
also be used as a featherboard like device to keep your
stock up against your tablesaw fence.
Learn how to assemble, use and some valuable tips
and tricks after watching the GRR-Ripper DVD. Over
two hours worth of great information.
The GRR-Ripper 200 model includes the same great
features as the basic model, plus it has an extra leg
that can be used to give you extra gripping power for
wider stock pieces. Also comes with the large leveling
pad. This pad is used to level your Gripper when cut-
ting smaller pieces. Get a second Gripper for cutting
anything longer than 16”. You’ll have a second GRR-
Ripper for “daisy chaining” your stock through the
blade in a safe, controlled manner.
The Gravity Heel is a spring loaded lever that attaches
to the back of your GRR-Ripper® & provides extra le-
verage by dropping down behind the stock. The Grav-
ity Heel can also be used on the router table as back-
ing block to prevent blow out. Stock can be horizontal
or vertical
(Grr-Ripper lays on its side)
. Can be also used as a
setup template for future use of the same router bit.
1367
Gripper 100 basic model ................................
$59.00
1370
Gripper 100 2 pack...........................................
$109.00
1373
GRR-Ripper 100 Upgrade Kit ...........................
$22.99
1374
GRR-Ripper Instructional DVD ..........................
$9.99
1368
Gripper 200 model ...............................................
$79.00
1371
Gripper 200 2 pack..............................................
$149.00
4055
Gravity Heels (5 heel set)...................................
$19.99
4056
Replacement Kit
(2ea.3/4”and1ea1”Heel)
.............
$14.99
Upgradeyour
GRR-Ripper100!
LearnGRR-Ripper
TipsandTricks
Theperfect
GRR-Ripper to
get youstarted
Stepuptothe
GRR-Ripper
200Advanced
Model
GRR-RipperNot
Included
GRR-RipperNot
Included
3364
1 ea. 1⁄8”leg
(attachesouteredgeonly)
(A)..................
$14.99
3260
1 ea. 1/4”leg attachment (B)............................
$14.95
3258
1 ea. center leg (C).................................................
$15.95
3256
1 ea. 1/2”leg (D) .....................................................
$14.95
1375
Replacement leg set (B,C and D).....................
$29.99
A - 1/8” Leg
C - Center Leg
D - 1/2” Leg
B - 1/4” Leg
Connector
Bridge
Trailing Hook
Upgrade your GRR-Ripper with the Handle Bridge at-
tachment for more stability, the Trailing Hook for back
end support and the Connector to attach two GRR-
Rippers together for large panel work.
1381
Handle Bridge Kit w/ Trailing Hook .................
$12.99
1382
Connector Kit ..........................................................
$12.99
1383
Connector Kit w/ Handle Bridge Kit/Hook ...
$22.99
The Steel Splitter Pro is a dual splitter system that not
only provides pressure up against the fence, it also
pushes the off-fall piece outward to prevent pinching
on the back side of your cut. It is constructed out of
stainless steel for super strong durability and is coated
with a polymer for smooth operation during cuts.
3149
Steel Standard Kerf (1⁄8”) Blue............................
$39.00
3189
Steel Thin Kerf (3⁄32”) Orange..............................
$39.00
3358
Steel Combo Pack -
Includes1ea.#3149and#3189
.
$73.00
Microjig Steel Splitter Pro
Microjig Splitter
GRR-RipperNotIncluded
GRR-RipperNotIncluded
Tablesaw Accessories