37 / 208
Your One Stop Supply Shop”
37
Just like it’s big brother the
Big Gulp, the Mini Gulp can
be used anywhere in the
shop where size constraints
are an issue. This hood is pri-
marily designed to be used
on your shop machines to
create a 4" port for a connection to a standard 4" dust
hose. The hood is 13-1/3”x 7-1/4”and accepts a stan-
dard 4” dust hose. A hose clamp is required on one
end for proper connection (see page 44).
The Big Gulp works most anywhere. It's a great catch all for dust, chips and debris. The Big Gulp Dust Hood is 12-
1/2”x 16”and accepts a standard 4”dust hose with a hose clamp
(not included).
The universal bracket allows you to
clamp dust collection hoods, hoses or flanges on to your workbench, lathe, chop saw, sanding area or any work
station in your shop.The head assembly swivels, letting you direct suction exactly where you need it. Heavy duty
steel bracket clamps from 1/4" to 2-1/4" and comes with a 4" steel hose clamp.
Stop leaks from gaps caused by hose clamps or bet-
ter yet replace hose clamps altogether with X-Treme
Tape. You can join hose to hose, hose to fitting or
fitting to fitting with out the use of clamps. X-Treme
Tape is great for repairing punctures in all typed of
dust collection hose. X-Treme Tape is gray in color and
comes 1-1/2" wide x 25' long.
Dust Collection
Flanges
Tablesaw Flanges
Universal Flange
Jointer Flanges
Table saw flanges will allow you
to connect your dust collection
hose to the underside of your
saw. The opening is for a 4”hose
to attach with a hose clamp or a
tapered quick connect fitting.
The universal flange is just that,
universal, it works on just about
anymachine. It is easily attached
with the wide flat border around
the outside of the flange. The
opening is for a 4”hose to attach
with a hose clamp or a tapered
quick connect fitting.
Big Gulp Dust Hood & Dust Port Bracket
Mini Gulp Dust Hood
Shop Dust Hood
The dust hood is a great catch
all for your dust collection sys-
tem. The plastic hood has a 4”
O.D. port opening and collects
dust where dust collection
outlets are not available. Posi-
tion it for sanding, carving, etc.
The opening of the Shop Dust
Hood measures: 43⁄8" x 97⁄8". A hose clamp is required
on one end for proper connection (see page 44).
0460
......................................................................................
$8.99
4”bell dustport sets up
similar to a flange. It is
generally used on larg-
er machines, such as
the table saw or joiner.
The neck allows for a 4”
hose to be secured. Measures: 9½” long x 4½” wide.
Hose clamp required for connection. (see page 44)
0390
......................................................................................
$5.99
4” Bell Dustport
4” Port Floor Sweep
Make clean up a breeze with an easy to install extra
wide floor sweep. Attach to a 4” hose end with any
standard hose clamp, place it flat on the floor and
sweep the dust and debris into the floor sweep flange.
The floor sweep measures 24" in length and 7" wide
0429
......................................................................................
$8.99
0403 (A)
Big Gulp Dust Hood...........................................................................................................................................................
$22.99
0480 (B)
Dust Port Bracket................................................................................................................................................................
$16.99
A
B
Dramatically change your router tables ability to col-
lect dust while making your cuts. Our Router Table
Downdraft Box attaches directly underneath your
router table top and surrounds the entire router it-
self, giving you more dust collection control than on
a typical router table dust collection unit. Measuring
13" x 10" x 14" deep, the downdraft box is designed
to house most types of routers and router lifts. Made
out of stamped steel, the box is easy to assemble
and has a large access door panel allowing for easy
access to make adjustments to your router when
necessary. The unit has a drop-off hole cut into the
bottom for attaching the 4" dustport (included) and
hose (not included) to the box.
3593
.................................................................................
$79.99
Router Table Downdraft Box
Dust Collection
anywhere you
need it !
When fittings
don't quite fit
0404
......................................................................................
$8.99
0432
6”x 10”jointer flange....................................
$7.99
0427
6”jointer flange...............................................
$5.50
0428
8”jointer flange...............................................
$6.50
Connect
your dust
collection
hose to your
machinery
Jointer flanges will allow you
to connect your dust collection
hose to the side of your jointer
machine. They can also be used
on other workshop machinery
depending on your needs. The
opening is for a 4”hose to attach
with a hose clamp or a tapered
quick connect fitting.
0430
12”tablesaw flange.......................................
$6.99
0431
14”tablesaw flange.......................................
$7.99
0426
6”Universal Flange........................................
$4.99
Tablesaw Dust
Collection Guard
This Guard is the ideal solution for table saw safety
and dust control.When connected to a dust collection
system, the Dust Collection Guard captures the dust
thrown up by your table saw blade. The guard can be
used on any table saw with an extension table. It is
very easy to install and easily swings out of the way
when not in use. A unique counter-balance allows for
fast & easy positioning of the unit. The system also has
a 2½” to 4” enlarger included so you can enlarge your
hose size right up to the 4” size. This is an oversized
package, please call for shipping and handling rate.
0328
..................................................................................
$199.99
*Oversized Package
Please Call For
Shipping Rate
X-treme TapeWrap
0338
X-treme Tape for Ducts..................................
$17.99
Dust Collection