Your One Stop Supply Shop”
53
WS-6
Clamps
Our 90
˚
Angle clamp allows you to pull the handle out and rotate it to apply extra
holding power. The clamp automatically adjusts to the thickness of your stock. Two
holes are pre drilled on the bottom side to accept table clamps
(not included- sold sepa-
rately)
to keep the clamp secure to the table top.
The 3D Square is 3/16" aluminum machined to a computer-generated precision
of +/- .002" over the full 6" length of the blades. The L-shaped profile is engineered
for strength, yet thin enough to allow quick and easy fastening with spring clamps.
Bar-clamps or C-clamps can be used where stronger holding power is needed.
Fulton 90˚ Angle Clamp
With the Clamping Squares, you can clamp a 90
°
joint with ease. Simply clamp the
square into the corner of your joint using most any style of clamp. The clamping
squares are
¾
" thick to make clamping and placement a breeze. Each square is
made from aluminum and machined with a tolerance of +/- .001. Each square has
beveled edges & are anodized to resist staining.
1166
2¾" clamping square 2 pack......................................................................................
$24.99
1167
6" clamping square 2 pack..........................................................................................
$34.99
Clamping Squares
3D Clamping Square
3091
1 ea. 90˚ Angle clamp....................................................................................................
$29.99
3092
Table Clamps ( 2 pack ) ..................................................................................................
$6.99
3592
1 each 3D square 2 pack............................................................................................
$32.99
Bessey 90˚ Angle Clamps
WS-3
PRO-GRIP 8' Heavy Duty Guide
Two 50" Heavy Duty-Wide Body Tracks plus One Heavy Duty
Extension System equals complete portability and cut accu-
racy. This system gives you clamping length of over 8 feet to
easily clamp the guide to full length sheets of plywood. Once
secured with the 360° Track clamps, the Guide system allows
you to cut precise straight lines with your portable saw, router,
and more. The Guides are secured together with an extension
bar system that keeps the two pieces solid and square during
the cutting process. The 360° Track clamps (2 included) secure
the guide to your material to be cut. Each HD Aluminum Rail
Measures 50" long x 5" wide.
0546
........................................................................................................
$119.99
Attach
The PRO-Grip™Adjustable Guide System gives you the accuracy and convenience
of a panel saw with the portability of a straight edge guide. Cut large and small
stock without having tomess with c-clamps.You canmake 90° cuts on large or small
sheets of stock, as well as tapered or angled cuts with total precision. This System
also works with routers, jigsaws and even laminate trimmers. Unlike c-clamps or f-
clamps, the head of the 360˚ clamp (set of 2) rotates to allow the pad of the clamp
to be secured firmly to your stock without interfering with the cutting process. The
360˚ guide clamps can be slid to any point along the under side of the wide body
straight edge guide to accommodate almost any size stock without interfering. This
allows you to set the wide body straight edge at any angle. The Adjustable Guide
attachment fits neatly into the track of the PRO-Grip Wide Body Guide. The Guide
has positive stops built into the unit at: 0,15, 22½, 30, 45 and 90 degrees. This makes
it easy to achieve the angles you need. The PRO-Grip™Wide Body Guide is 62”long
and made from extruded aluminum that is 5” wide to provide superior durability
and no deflection. Built in tracks will accept any PRO-Grip accessory.
0552
Complete Adjustable Guide System
(1 each A, B, and C)
...................................
$134.99
0551
Basic Guide System
(1 each A, and C)
..........................................................................
$84.99
0554
360° guide clamp pack (
1 each of C
) ..........................................................................
$25.99
PRO-Grip™ Adjustable Guide System
(A) Adjustable Miter Guide
(B) 62" Wide Body Guide
(C) 360˚
Guide Clamp
Set of 2
saw not included.
Need to cut a full or a half sheet of plywood straight? The 105" clamp provides more
than eight feet of clamping area between jaws, while the 50" easily allows you to
crosscut a half sheet of plywood. The triple cam lock system ensures no slipping
once the clamp is locked in place. The five inch wide body provides the stability
and sturdiness for longer cuts. Simply line up the PRO-GRIP™ clamp, lock the clamp
down on your plywood sheet and start cutting with your circular saw or even your
router. (Both clamps will accept most of the PRO-GRIP™ clamp accessories).
Extra wide body for great stability
while making long rip cuts!
50" Long x 5" Wide Unibody
105" Long x 5" Wide Unibody
PRO-GRIP™Wide Body Straight Edge
0582
*
50" wide body straight edge clamp......................................................................
$59.99
0596
*
105" wide body straight edge clamp ...................................................................
$119.99
*
Oversized
Package
Please Call
For Ship-
ping Rate
The Bessey 90 degree angle clamp holds and aligns material at a 90° angle. The
clamp adjusts automatically to your wood thickness. Features: Galvanized spindle;
acme threads; die cast jaws and plastic-coated to protect work. Designed for clear-
ance for dowels, screws or staples while gluing. Table Clamps: (sold separately)
Holds Bessey angle clamps to work surface for great stability. TheWS-3 Clamp han-
dles stock up to 3" thick while theWS-6 handles stock up to 6" thick.
WS-1
3574
WS-1 3" light duty clamp.........
$6.99
0786
WS-3 3" cormer clamp............
$29.99
0787
4pk - WS-3 angle clamps .....
$109.99
0788
WS 6 - 6” corner clamp...........
$79.99
0789
table clamps (1 pair)..................
$6.99