Non-Woven Green Pads
Fine - 600 Grit (10 Pack)

Our 6” x 9” non-woven abrasive pads are manufactured from tough synthetic fibers that will not rust or splinter like steel wool. They can be used for dry scuffing or even with chemical solvents. The pads easily conforms to cracks and crevices. Use on many different materials including metal, ceramic, plastic and wood.

Features:

• Flexible abrasive pads are resistant to chemicals
• Will not rust, splinter or shred like steel wool pads
• Provide a longer lasting surface than sandpaper

Includes:

• 10 ea. Non-Woven Green Pads - Fine - 600 Grit

Green Spirit Stain - 8 oz. Bottle

Spirit Stain Rainbow Colors are a quick-drying wood dye manufactured with high grade, fade resistant materials. It can be intermixed for colour matching or thinned using Spirit Thinners or Cellulose Thinners for delicate wash effects. It Can be applied with cloth, brush, spray, or foam brush.

Specification	Description
Typical Uses:	To colour wood prior to finishing
Method of application:	Cloth, brush, spray, foam brush
Drying Time:	Usually within five minutes
Coverage:	Approximately 4-8 sq.m per litre
Compatibility:	Use under most products; care should be taken when using under solvent based finishes
Tips:	Ensure wood is clean and dry before use. All colours can be intermixed or thinned for delicate wash effects.
Thinners:	Spirit Thinners, Cellulose Thinners or Methylated Spirit

Lefty / Righty ProCarpenter Standard Reverse
16' Tape Measure

FastCap's original line of tape measures feature a built in FastPad for jotting down measurements, a compact design, and a heavy-duty protective rubber boot. The ergonomic belt clip and built-in pencil sharpener are features that our customers have requested for years! The blade on this tape is one inch wide and is designed with a four rivet nose clip that will handle the wear and tear of daily use. Easy to read scale is identified down to the 1/16".

Features:

• Standard Reverse Tape
• Heavy-duty 1-inch blades
• High-contrast Black and white scale
• Easy to read fractions down to 1/16"
• Dual thumb and finger locks
• Shock resistant rubber casing
• Built in carbon steel pencil sharpener
• Erasable note pad on the face
• Lever action belt clip
• Shock resistant rubber casing
• 16' Tape Measure

Spring Dream II Hybrid Bottle Stopper Blank

Opening a bottle of wine capped with one of these colorful and unique bottle stoppers is surely going to start a conversation. The look of hybrid bottle stoppers are totally unique and no two of these stoppers are the same! Hybrid Bottle Stopper Blanks are unique, beautifully combined wood and acrylic mix that a very pleasing to the eye. Blanks are approximately 1-7/16" x 1-7/16" x 2-3/8"

Features:

• MADE IN THE USA!!! Each blank has its own opaque or semi-transparent style, which means they never having the same look twice from blank to blank.


• THE HYBRID BOTTLE STOPPER BLANKS are approximately 1-7/16" x 1-7/16" x 2-3/8” which is a standard size for un-turned bottle stopper blanks. The blanks will fit into most pen vises for drilling the hole for mounting to the actual bottle stopper.


• WOOD GRAIN, WOOD COLOR, acrylic mix, and amount of wood versus amount of acrylic in each blank will vary. BEAUTIFUL to look at and very pleasing to use, the Hybrid blanks are sure to become a favorite!

Wood grain, wood color, acrylic mix, and amount of wood versus amount of acrylic in each blank will vary.

Only 1 bottle stopper blank included. Turned bottle stoppers blanks and bottle stoppers not included.

Mica Powder Pigment Set - Red, Green, and Blue Palette

Add a splash of color to any craft with our Mica Powder Pigment palette of red, green, and blue. This set combines elegance and versatility, with colors that were handpicked for their incredible luster and usefulness in a wide range of applications. The RGB Mica Powder Pigment Set is a fantastic addition to any crafters arsenal. With the stunning green of the ocean, the fiery red of lava, or the vibrant blue of the sky, this fantastic assortment of colors will be sure to make your next project pop!

Features:

• Lightweight and silky smooth mica powders
• The included mixing spoons are perfect for dispensing or mixing the powders
• Non-toxic, non-irritating, odorless, and eco-friendly

Ruby Red

Mahogany Red

Pomegranate Red

Merlot Red

Rouge Red

Teal

Aqua Green

Turquoise Green

Emerald

Dark Emerald

Aquamarine

Dark Teal

Diamond Olive

Diamond Fruit

Silver Baby Blue

Cobalt Blue

Cyan Blue

Electric Blue

Dark Blue grey

Bleu de France

Diamond light blue

Pastel Blue

Diamond Periwinkle

Diamond Sky Blue

Lightweight and Silky Smooth

Of course, you can mix these with your favorite Starbond CA glue, but you can also use these jars for epoxy pours and so much more. The included mixing spoons are perfect for dispensing or mixing the powders. Lightweight and silky smooth, these mica powders will come in handy whether you are doing wood inlay, making jewelry, mixing paints, or creating incredible crafts!

Non-Toxic, Non-Irritating, Odorless, and Eco-Friendly

Not only do these mica powders look amazing, but they have utility as a thickening agent for CA glue that also makes it resistant to cracking and can even improve bonds when used to glue metal, ceramic, or glass. Non-toxic, non-irritating, odorless, and eco-friendly, you can use these powders without worrying about hazard or environmental impact.

Medium Lathe Turning Tool Storage Roll - 29" x 19½"

Store your lathe turning chisels, gouges, skews and more in this convenient Woodturner's Tool Roll! Measuring 29" x 19½" when laid out, the tool roll provides plenty of room for your lathe tools and more. Note: Tools not included

Features:

• 29" x 19½" Full size lathe tool roll
• Fits up to 14 turning tools
• Handy carrying strap for easy portability
• Rolls up for easy transport
• Pockets measure approx. 12" deep

Note: Tools not included

14 Pockets Provide Plenty of Room

The canvas roll has 14 pockets measuring 12" deep and the pockets vary in width for different size tools. Note: Tools not included

Handy Carrying Strap for Easy Portability

Two nylon web straps with buckles secure the tool roll after it is rolled up. The tool roll also includes a handy carrying strap for easy portability. Note: Tools not included

MATCHFIT Dovetail Clamps - 2 Pack

MATCHFIT Dovetail Clamps by MICROJIG will revolutionize the way you work with wood. MATCHFIT Dovetail Clamps move through the grooves below the material, allowing you to clamp anywhere, on any surface, without being confined to the edge. Features new rubberized soft-grip handle for better hold when clamping your next project, and expands creative freedom to build extension fences, tables, workspaces, and personalized track systems.

Designed For Creativity, Engineered To Work Smarter

• Clamping Range: 0 – 5.25" (0 – 133mm)
• Clamp Pressure: 595 lbs open at 4"
• (270 kg open at 100mm)
• Jaw Depth: 2.375" (60mm)
• Minimum Dovetail Slot Length: 3.75" (95mm)
• Dovetail Profile: 0.5" by 14º

Reach New Heights

The MATCHFIT Dovetail Clamp allows for unlimited fence heights because the clamp arm seamlessly slides through the track without being limited by the arm like traditional clamps.

The Clamps hold the fence extension securely at the ends of the table saw fence preventing bowing out.

Horizontal-Clamping

Create Your Own Dovetail Track System

Route vs T-Track

Perfect for clamping home made jigs

MATCHFIT Dovetail Clamps – the only clamps as free as your creativity.
The breakthrough dovetail clamp arm design gives you the freedom to create your own track grooves using a dovetail router bit to clamp virtually anywhere.

Create clamping tracks virtually anywhere by routing dovetail grooves.
Exert versatile clamping pressure without interfering with the operation by containing the MATCHFIT Dovetail Clamp head arm within the dovetail groove. It expands creative freedom to build:

• Use as hold downs on workbenches
• Mount outfeed extension to tablesaw
• Mount and infeed to tablesaw
• Personalized track systems
• Extend the height of your tablesaw fence
• Extend the height of your bandsaw fence
• Create your own sawtrack
• Create custom fences
• Use with Matchfit Dado Stop (sold seperately) to create perfect-fitting dados, joinery, and inlays with any saw blade, fast.
• and much morehttp://www.ptreeusa.com.

Includes: 2 MATCHFIT Dovetail Clamps.

Note: Only works with 1/2" x 14º Dovetails

Note: Routers, tablesaws, Matchfit Dado, bandsaw fences, K5, jigs, templates and all accessories are Not included.

Mr. Cornwall's Creative Colours
Green CCGRN - 9 oz Jar

Mr. Cornwall's Creative Colours are 100% pure finely ground pigments created especially for the Artisan, Craftsman and Master. These pigments can be mixed with all of the Odie's finishes to create decorative finishes, man-made patinas, and color-matched protective finishes for furniture and floors. Blend the colors together to create custom colors.

You can use Mr. Cornwall's Creative Colors to create custom stains.

There are two ways to do this:

1. For an oil based stain you can simply add the pigment into the Odie’s oil or Super Duper Everlasting Oil- shake or stir vigorously to maintain even distribution and apply it like a wiping stain. This will be applied as per the basic Odie’s oil application instructions page. Let it cure for 3 to 7 days.
2. For a solvent based stain you can mix 2-3 parts Odie’s Safer Solvent with 1 part Odie’s Oil, and then add in your pigment. This is better to get dark stains and it has the advantage that it cures much faster, also you can add another coat of the stain for more color. This will be applied as per the basic Odie’s oil application instructions.

The level of sanding will restrict color saturation, therefore the higher you sand less color you will get, please run some tests.

For the solvent method you may need to apply multiple layers to achieve the desired color saturation. It is always important to test your stain before applying it to the entire piece. This is a custom made stain, so you will be in charge of what color you make

110V Single Phase On/Off Switch

The whole idea of this switch is to make the power down process very quick. We've accomplished this by making the off switch engaged with a large, red, easy to see paddle. No more feeling around underneath your tabletop to find your switch. Make your table safer with this easy-to-use power tool switch!

Features:

• Single Phase
• 110 Volt
• 15 amp
• Large Stop Paddle
• Easy to Mount
• (Hardware Included)
• Large Buttons
• 66" Heavy Duty Male Cord
• 18" Heavy Duty Female Cord
• The stop sign paddle measures
• approximately 5-3/8" tall by 3-7/16" wide

Ideal for smaller workshop machinery

Made from durable materials, the box on this power tool switch is sealed. Works with devices that draw 15 amps or less. Ideal for smaller workshop machinery like router tables and small table saws.

Heavy Duty Cords

18" long female cord for accepting the power tool plug and a 66 inch long male cord to plug into the power source. Both cords are heavy duty cords to stand up to everyday exposure in workshops.

Quick Install Process

Once mounted and with your router or small machine unplugged, plug your router or small machine plug into the female cord receptacle. With the power off on your small machine or router, plug the male cord into the power source. Push the paddle until the stop button clicks to make sure it is off. Turn the switch on your router or small machine to the on position.

Once Mounted and Hooked Up

Once Mounted and properly hooked, make sure that the switch is sitting securely in position. If it is loose, please be sure to address this before using the switch. A loose sitting switch is not safe and must be properly secured.

Turn it on

Press the large green start button. Your router or small machine should be powering up. Now you can power on without reaching underneath your table top!

Bump the Stop Sign... Turn it off

Using your knee or hip, bump the stop sign paddle. Your router or small machine should start powering down. It doesn't take a whole lot of force from your knee to trip the switch. A slight bump will do. Now you're all set and you can kill the power at a moment’s notice using our Large Stop Sign Paddle On/Off Switch!

12 Piece Diamond Ball Bur Set

12 New Diamond Coated Ball Burs * This is a new set of 12 diamond coated ball burs * This master diamond bur set allows you to shape, grind and finish with precision * Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals or anything else that is hard * Recommended for jewelers, lapidary, hobbies and crafts, modeling, home repair, etc * Provides uniform cutting on wide a variety of materials * Use water for lubricant * All have a 1/8" (3 mm) shank

Features:

• Works great on all natural materials Ceramics, Tile, Glass, Bone & Wood
• Ideal for Carving, Grinding, Sanding, Etching and more!
• Long lasting when coolent is used
• 12pc round ball shaped burrs with 1/8" shank

 Edge Banding Edge Cutter

If you have ever tried to cut the end off of your edge banding projects, you know it can be quite challenging to achieve a clean smooth edge. With this edge cutting tool you can easily, cleanly and smoothly cut the end of your edge banding every time using the unique Edge Banding End Cutter.

Features:

• Easily, cleanly and smoothly cut the end of your edge banding every time
• Includes two extra cutter replacement knives
• Designed to be used with edge banding up to 1/64" thick and as wide as 2-1/8"
• Simple in design

Includes:

• 1 ea. Edge Banding Edge Cutter
• 2 ea. Cutter replacement knives

Perfect Cut Every Time

Perfectly cut the end of your edge banding every time using the unique Edge Banding End Cutter. Once you have your edge banding set, place the End Cutter over the edge and corner of your work piece. Then, press the large handle down to cut the edge banding. The result will be a clean, straight cut that is near perfect every time.

Simple in Design

Designed to be used with edge banding up to 1/64" thick and as wide as 2-1/8". This tool is simple in design but comes up big when it comes to saving time.

Included Extras

The End Cutter also includes two extra cutter replacement knives.

 Double Edge Banding Trimmer

The Double Edge Trimmer makes trimming edge banding quick and easy! In one pass it trims both sides of the of edge banding. With a comfortable and ergonomic design the Double Edge Trimmer trims both sides for a super smooth finish.

Features:

• Makes trimming edge banding quick and easy
• Trims both sides of the of edge banding in one pass
• Comfortable and ergonomic design
• Super smooth finish

Includes:

• 1 ea. Double Edge Banding Trimmer

Coarse Sanding Twigs - 100 Piece Pack

Detail sanding can be very tedious work, especially when your sanding things like wooden toys, plastic scale models, wood turnings or most any small project. We often settle for a piece of sandpaper, fold it multiple times and struggle to get into tight spaces. With the perfectly sized Keystone Sanding Twigs, this becomes a thing of the past. With the 1/8 inch thick, flexible foam core, laminated with a double sided abrasive, you’ll be able to sand those hard to reach areas and more!

• Double Sided Abrasive makes it perfect for everyday use on multiple applications
• Flat Profile fits neatly into smaller areas and works exceptionally well for model building and woodworking joinery
• Foam Core offers enough flexibility for delicate projects and is rigid enough to sand down larger blemishes & markings
• 1/8" Thick is the ideal thickness for to getting into smaller spaces
• 6" in Length is the perfect size to fit comfortably in your hand.

the perfect choice to get the job done

The perfect detail abrasive sanding twig pack with 25 each of 4 different grits ranging from 80 grit to 180 grit. You’ll find multiple uses for these sanding twigs all around your home, workshop or hobby shop. From de-burring small pipes, to your working on your latest arts and crafts project, these twigs are the perfect choice to get the job done. The size and shape makes them perfect for just about any smaller object that needs to be detail sanded.

The narrow size of the Keystone Sanding Twigs make them ideal for many types of projects. Woodworkers love these unique twigs for sanding applications like dowel holes and dovetail corners for great fitting joinery. Woodworkers also use these sticks for many different small projects like wooden toys and wood turnings. Many scale model builders use this style of sanding twig for easily working the trim on the plastic parts when the models are taken apart from the runner (parts holder)

Grab The Grit You Need When You Need It...

This convenient pack of sanding twigs comes with 25 each of 4 different sanding grits. This gives you a total of 100 sanding twigs for working most any type of project. In this pack you will receive 25 each of the following color coded grits: 80 grit, 100 grit, 120 grit and 180 grit. These grits are perfect for most general sanding applications ranging from woodworking to model building.

Joinery, Woodturning, Bird Houses, Arts, Crafts and a Whole Lot More!

If you've every built a scale model, made a sign or created any type of wooden box, then you know how being able to sand small tight spaces is of the utmost importances. These twigs are perfect for working tight, small corners and holes. Normal sandpaper folded or rolled up can't compare with these twigs!

Work Copper, Steel, Aluminum and More...

Work build up and debris off your your small metal materials all around the home. From copper tubing to screwdrivers, you can file, sand and clean up your tools and materials using the Keystone Sanding Twigs.

Model Builders

If you have ever built a scale model, then you know how important it is for perfectly fitting parts. When separating the model parts from the runners, a nub is typically left on the part. This needs to be sanded down. The Keystone Sanding Twigs are definitely up to the task. With the small, flat profile you'll be able to work the tiniest pieces and smallest spaces throughout the entire model building process.

We really do mean almost anything....

From wood to plastic, from composites to hard metal, from carbide to soft materials you can sand it with the super versatile Keystone Sanding Twigs!

Each detail sanding stick is approximately 6 inches long and 1/8 inch thick with the abrasive on both sides of the twig. The twigs are the same dimension the entire length of the twig. This makes them ideal for small projects. The abrasive sides are layered and bonded on to a foam core which is firm enough for general sanding purposes and forgiving enough for delicate areas on your projects.

ProEdge Trizact Belt - 1200 grit - 2" x 30-1/2"

These 2" x 30-1/2" belts are designed for use with the Robert Sorby® ProEdge™ Sharpening System, these ultra-fine Trizact Belts allow you to shape and hone all types of knives, high-speed steel turning tools, carbon steel cutters and carving tools to a super fine edge.

Features:

• Ideal for sharpening all types of knives, HSS tools, and carbon steel cutters
• Open form abrasive provides a more rapid cut and resists clogging
• Designed for cooler cutting and extended belt life

Tapered Point Detail Sanding Sticks - 21 Piece Pack

Detail sanding can be very tedious work, especially when your sanding things like wooden toys, plastic scale models, wood turnings or most any small project. We often settle for a piece of sandpaper, fold it multiple times and struggle to get into tight spaces. With the uniquely shaped Keystone Detail Sanding Sticks, this becomes a thing of the past. With the pointed tip and the wide bodied stick, you’ll be able to sand those hard to reach areas and more! The pointed tip on the Keystone Detail Sanding Sticks makes them ideal for a large variety of projects. Woodworkers love these sticks for sanding applications like dowels and dovetails for great fitting joinery. Woodworkers also use these sticks for many different small projects like wooden toys and wood turnings. Many scale model builders and hobbyists use this style of sanding stick for easily working the trim on the plastic parts when the models are taken apart from the runner (parts holder)

• Double Sided Abrasive makes it perfect for everyday use on multiple applications
• Pointed Tip fits neatly into smaller areas and works exceptionally well for model building and woodworking joinery
• Foam Core offers just enough flexibility for delicate projects and is rigid enough to sand down larger blemishes and markings
• 1/8" Thick is the ideal thickness for to getting into smaller, more detailed oriented spaces
• 6" in Length is the perfect size to fit comfortably in your hand. Much like a pen or pencil so you can work without constantly adjusting your grip

Keystone 21 Piece Tapered Point Detail Sanding Sticks
with Cushioned Foam Core in 7 Different Grits

The perfect detail abrasive sanding stick pack with 3 each of 7 different grits ranging from 80 grit to 400 grit. You’ll find multiple uses for these sanding sticks all around your home, workshop or hobby shop. You can even use these sanding sticks like emery boards for filing your fingernails. The size and shape makes them perfect for just about any smaller object that needs to be detail sanded or filed.

Grab The Grit You Need When You Need It...

This convenient pack of detail sanding sticks comes with 3 each of 7 different sanding grits. This gives you a total of 21 detail sanding sticks for working most any type of project. In this pack you will receive 3 each of the following color coded grits: 80 grit, 100 grit, 120 grit, 180 grit, 240 grit, 320 grit and 400 grit. These grits are perfect for most general sanding applications ranging from woodworking to model building.

Joinery, Woodturning, Bird Houses and More!

Building a cabinet with dovetails or box joints? Or maybe your turning the next wooden top toy. Or perhaps your going to make the perfect birdhouse for your backyard sanctuary. Regardless of the project, the Keystone Detail Sanders are sure to be in your bag of tricks for the perfect finish and fit!

Arts and Crafts

Whether your making a sign to hang in your kids room or creating the worlds best school project, chances are you may need to sand small tight spaces. This is where the detail sander is the perfect solution. Get in and out of areas on small wooden or plastic numbers and letters with ease. Work small frames for a perfectly fitting corners. These sanders are sure to come in handy for any arts and crafts enthusiast!

Model Builders

If you have ever built a scale model, then you know how important it is for perfectly fitting parts. When separating the model parts from the runners, a nub is typically left on the part. This needs to be sanded down. The detail sanding sticks are definitely up to the task. With the pointed tip and the 3/4" wide stick, you'll be able to work the tiniest as well as the larger pieces throughout the entire model building process.

We really do mean almost anything....

From wood to plastic, from composites to hard metal, from carbide to soft materials you can sand it with the super versatile Keystone Detail Sanding Sticks!

Each detail sanding stick is approximately 6 inches long, 3/4 of an inch wide and 1/8 inch thick with the abrasive on both sides of the stick. The sticks taper to a rounded off pointed tip to neatly fit into smaller areas. This makes these sticks ideal for small to mid-size projects. The abrasive sides are layered and bonded on to a foam core which is firm enough for general sanding purposes and forgiving enough for delicate areas on your projects.

Cabinet Door & Drawer Knob & Pull Template Set

Mounting knobs or drawer pulls for doors and drawers doesn't have to be a crap shoot. The Fulton Cabinet Door & Drawer Templates make quick work of aligning both and best of all it's precise! All you need to do is choose the hole that best suits your needs, mark it with a pencil, drill and then mount your pull or knobs. It's really that easy! The drawer template works for any drawer up to 10" high. The Door Template has five knobs and four pull positions.

Features:

• Templates for the both cabinet doors and drawers
• Works iwth both knobs and pulls
• Works with drawers up to 10" high
• Alignment is fast, easy and precise
• No Guess work

Includes:

• 1 ea. Drawer Knob & Pull Template
• 1 ea. Cabinet Door Knob & Pull Template

Universal Tint - Fir Green, 20 ml.

Mixol offers the highest quality universal tints on the market. Mixol is compatible with almost any paint and coating. The full assortment of colors mixes easily with shellacs, lacquers, primers and fillers. Mixol is known for its high concentration of pigment, sophisticated color palette, and ease of mixing. They are highly resistant to frost and heat damage. They have an indefinite shelf life, and because they are binder-free, they will not dry out or thicken.

Features:

• Most concentrated, highest quality tints on the market today
• Easy soap and water cleanup
• Not flammable or hazardous
• Highly resistant to heat or frost damage
• Won't dry out or thicken so there is a very long shelf/shop life

Includes:

• 1 ea. Mixol Universal Tint
  Fir Green, 20 ml.

Drawer Pull Installation Jig

Easy to use - Mark center line, choose boring width needed and position wooden guide for correct spacing and lock. Align jig over center line and mark holes. Remove jig and drill. Perfectly aligned holes for your drawer pulls every time.

Features:

• Precisely mark position for drawer pulls with our "Drawer Pull Installation Jig.
• Jig measures 7" wide by 6" tall.
• Designed for the most common boring widths of: 96mm, 3", 3-3/4" 3-1/2", 2-1/2" and 4"

Includes:

• 1 ea.Drawer Pull Installation Jig

Shamrock Color Splash
Acrylic Pen Blank - 3/4" x 3/4" x 5"

Turning pens and pencils can be a ton of fun and when you have just the right pen blank or the just right color it makes the process even more enjoyable! The Color Splash Acrylic Blanks are the perfect way to add just the right amount of color to your finished pen or pencil.

Features:

• Measures approximately 3/4" x 3/4" x 5
• Can be drilled like a standard wooden blank
• One of the best parts about acrylic blanks is that you don't need to add endless amounts of waxes or finishes for a wonderful shine. High grit abrasives (not included) and some C/A glue (not included) will do the trick and produce a high gloss finish

These acrylic blanks are undrilled and are 3/4" x 3/4" square x 5" long. Actual Patterns may vary from images shown above.

drill like a standard wooden blank

Negative rake carbide turning tools also produce fantastic results when turning acrylics. Each blank measures approximately 3/4" x 3/4" x 5" and can be drilled like a standard wooden blank. Blank Only. Pen Kit Not Included

Amazing results

Wether you decide to make them as gifts or sell the Color Splash pens you will be very happy with the end results. When turning acrylic material on a lathe, it is highly recommended that you use sharp turning tools for optimum results. Blank Only. Pen Kit Not Included

Lime Freeze Color Splash
Acrylic Pen Blank - 3/4" x 3/4" x 5"

Turning pens and pencils can be a ton of fun and when you have just the right pen blank or the just right color it makes the process even more enjoyable! The Color Splash Acrylic Blanks are the perfect way to add just the right amount of color to your finished pen or pencil.

Features:

• Measures approximately 3/4" x 3/4" x 5
• Can be drilled like a standard wooden blank
• One of the best parts about acrylic blanks is that you don't need to add endless amounts of waxes or finishes for a wonderful shine. High grit abrasives (not included) and some C/A glue (not included) will do the trick and produce a high gloss finish

These acrylic blanks are undrilled and are 3/4" x 3/4" square x 5" long. Actual Patterns may vary from images shown above.

drill like a standard wooden blank

Negative rake carbide turning tools also produce fantastic results when turning acrylics. Each blank measures approximately 3/4" x 3/4" x 5" and can be drilled like a standard wooden blank. Blank Only. Pen Kit Not Included

Amazing results

Wether you decide to make them as gifts or sell the Color Splash pens you will be very happy with the end results. When turning acrylic material on a lathe, it is highly recommended that you use sharp turning tools for optimum results. Blank Only. Pen Kit Not Included

6 Piece Glue Spreader Kit

These spreaders have been used in the general craft market for years, where they are used to apply glue to felts, paper, card board, etc, or for working with thick paints to create special patterns. The tip is flexible and can be used with various amounts of pressure. Glue won't stick to the polypropylene plastic and dried glue just chips off . The Glue Spreader kit comes in a convenient 6 pack of multi colored spreaders / applicators.

Features:

• Use for applying or spreading glue on wood, felts, cardboard and more
• Also works with thick paints to create special patterns
• The tip is flexible and can be used with various amounts of pressure
• Glue won’t stick to the polypropylene plastic and dried glue just chips off
• Delivers in a convenient 6 pack of multi colored spreaders.

Includes:

• 2 ea. Red Spreaders
• 2 ea. Green Spreaders
• 2 ea. Yellow Spreaders

Microjig Standard Kerf Splitter (1/8") Green

The MJ SPLITTER easily installs on your table saw’s zero clearance insert, replacing the riving knife. It keeps your workpiece tight to the fence to prevent burning, and keep the kerf from pinching the blade, virtually eliminating kickback.

Features:

• Package includes (2) SPLITTERS, a drill guide, and a 7/64” drill bit
• Designed for ⅛” kerf saw blades
• SPLITTERS are reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009”
• Kerf range: 0.118 - 0.145”
• For 90 degree thru-cuts only

The best splitters you'll ever use

The included precision drill guide aligns your drill with the dead center of your kerf by registering off of the kerf itself. To account for runout, the package includes 2 SPLITTERS with built-in offsets from the center of the kerf. Each side has an offset in increments of .003” to ensure a perfect fit. The specially formulated plastic provides just the right balance of flexibility to prevent binding, and rigidity to prevent kickback.

Sandflex Hand Block - Medium Grit (Green)

These Blocks are a Solid Block of Grit. Simply use the block like an eraser, rubbing firmly on surface. Can be used wet or dry. Not recommended for plated or painted surfaces. Test on inconspicuous area before use. Non-Toxic.

Features:

• You can "carve" the block into any shape to clean up concave or convex surfaces
• Use these blocks like an eraser
• As you use it new grits are exposed - it never dulls!
• Takes rust away

Popular uses include:

• Clean rust from tools and unfinished metals
• Remove rust from out door equipment
• Clean stainless steel sinks, pots and pans.
• Restore nap to suede
• Clean electrical contacts
• Remove mineral deposits from ceramic tile and toilets.
• Clean tires and rubber products.

Finishes & Finishing Techniques:
Professional Secrets for Simple & Beautiful Finish

Finishing often seems to require more alchemy than skill. This book takes the magic and guesswork out of finishing by collecting the best recent material on finishing written by experts ranging from finishing chemists to America's best amateur woodworkers. These are practical solutions and accessible finishes, enabling anyone to get a great looking finish every time. Chapters include surface preparation, hand finishing tools and techniques, coloring wood, and special techniques. This is a must-have reference for weekend refinishers and woodworkers alike.

Topics covered:

• Surface preparation
• Coloring wood
• Hand finishing
• Spray finishing
• Water-based finishes
• Special techniques

Grr-Ripper® 1/8" Leg

Cutting small pieces on the table saw just got safer, faster and much easier. Make consistent and precise accurate 1/8" cuts safely and every time with the GRR-Ripper® without moving the fence. Just remove the the exiting 1/4" leg from the Grr-Ripper® and replace it with the 1/8" leg. Now you can cut those 1/8" strips on the inside of the blade and not have to stop stop to reset the tablesaw fence in those 1/8" increments each cut.

• GRR-RIPPER Accessory for ripping 1/8" thin rips consistently and cleanly on a table saw
• Attaches directly to the main body of the GRR-RIPPER or directly to the Side Leg of the GRR-RIPPER
• Powerful Green GRR-RIP holds and feeds wood through the cut
• Easily cleans with denatured or rubbing alcohol
• Perfect for edge bending, veneer, inlays, decorative design, model building and more.

GRR-RIPPER 1/8" Leg Accessory

Make quality rips as thin as an 1/8'' with the GRR-RIPPER 1/8'' Leg Accessory. Perfect for ripping wood on a table saw to edge bend or inlay. Create your own veneer strips or decorative details to make your next project a masterpiece. Easily attaches to all existing GRR-RIPPER Models. Mounting hardware included. Attaches directly to the main body or side leg of the GRR-RIPPER. Powerful Green GRR-RIP lines the bottom surface for secure traction and hold over the workpiece. Guides, rips, and feeds the workpiece without readjusting the fence for consistent quality and dimension. Before the GRR-RIPPER 1/8" Leg, thin rip cuts were extremely dangerous when manually feeding. Traditional push sticks are dangerous and unstable. Now, repeatable, clean, safe, and controlled 1/8” thin rip cuts are a reality for woodworkers worldwide. Make rip cuts as thin as 1/8" without breaking a sweat. The GRR-RIPPER's most popular accessory. Work Safer. Work Smarter.
1/8" Leg Accessory Only. GRR-RIPPER Not Included

Fits all existing GRR-RIPPER models

Works like the 1/4” Leg and attaches directly to the main body. Hardware is included. Fits all existing GRR-RIPPER models.

1/8” Rips

Make 1/8” rips for: Edge banding, decorative inlays, veneer, pulls, and much more.

Repeatable, Clean, Safe, and Controlled Cuts

Before the GRR-RIPPER 1/8” Leg, this level of control and surgical precision would have been very difficult for manual feeding safely. Now, producing repeatable, clean, safe, and controlled cuts is a reality for woodworkers worldwide.

What’s In The Box?

• (1) GRR-RIPPER 1/8” Leg.

Router Inlay Template - Clover

Inlays in your project can bring your finished piece to a whole new creative level. Made from tough shatter resistant PVC material for long life. Each template gives your router a stable, flat surface to run on, while your spiral bit and inlay bushing guide (not included) allow you to cut the inlay and recess with the same template.

Features:

• Made from tough shatter resistant PVC material for long life

Template Size:

• 6-3/8" x 6-3/8"