Wood Turning Accessories

5/8" Roughing Gouge

The roughing gouge performs the initial removal of wood in spindle turning. The high flute sides make it ideal for roughing from square to round with the cut made in the center area of the gouge. The hardwood handle is 16" long for better leverage and less fatigue when turning. The blades are made from high-speed steel hardened to RC 62-64. This blade will stay sharp 6 times longer than carbon steel. The sides cut like a skew to smooth the ripples from cylinder and taper shapes leaving a surface finish good enough to go straight to sanding without using any other tool. The roughing gouge works well in pen turning also. From the woodturner just starting out to the experienced craftsman, this wood turning tool is sure to satisfy your needs

Features:

• High speed hardened steel blades
• Stay sharper 6 times longer than carbon steel
• 16" Long Wooden Handle
• Honing of blades is required before use

3/4" Roughing Gouge

The roughing gouge performs the initial removal of wood in spindle turning. The high flute sides make it ideal for roughing from square to round with the cut made in the center area of the gouge. The hardwood handle is 16" long for better leverage and less fatigue when turning. The blades are made from high-speed steel hardened to RC 62-64. This blade will stay sharp 6 times longer than carbon steel. The sides cut like a skew to smooth the ripples from cylinder and taper shapes leaving a surface finish good enough to go straight to sanding without using any other tool. The roughing gouge works well in pen turning also. From the woodturner just starting out to the experienced craftsman, this wood turning tool is sure to satisfy your needs

Features:

• High speed hardened steel blades
• Stay sharper 6 times longer than carbon steel
• 16" Long Wooden Handle
• Honing of blades is required before use

2" Roughing Gouge

The 2” roughing gouge helps you remove large quantities of stock to get your workpiece to a round workable shape. The large 2” flute on this roughing gouge enables you to work with large pieces that can otherwise be difficult with a smaller roughing gouges. It will also work on smaller projects as well. Made from high speed steel with a 13½” hardwood handle and 6-1/8” tool secured with a brass ferrule.

Features:

• Remove large quantities of stock to get your workpiece to a round workable shape
• 2” flute enables you to work with large pieces
• Also works on smaller projects
• Made from high speed steel
• Work with large pieces that can otherwise be difficult

1" Roughing Gouge

The 1” Roughing Gouge helps you remove large quantities of stock to get your square stock workpiece to a round workable shape.

Features:

• Made from High Speed Steel (HHS)
• 10" Hard Wood Handle
• 6-3/8" Tool Lenth secured with Brass Ferrule
• 16-3/8" Over All Tool Length

CAUTION: Roughing Gouges are specifically designed to be use as a roughing tool. Roughing Gouges are NOT designed to cut cross grain or inside bowls as it is likely to catch and cause damage to the tool or cause personal injury.

3/4" Roughing Gouge

The 3/4” Roughing Gouge helps you remove large quantities of stock to get your square stock workpiece to a round workable shape.

Features:

• Made from High Speed Steel (HHS)
• 10" Hard Wood Handle
• 6-3/8" Tool Lenth secured with Brass Ferrule
• 16-3/8" Over All Tool Length

CAUTION: Roughing Gouges are specifically designed to be use as a roughing tool. Roughing Gouges are NOT designed to cut cross grain or inside bowls as it is likely to catch and cause damage to the tool or cause personal injury.

7/8" Roughing Gouge

Nothing removes stock like our robust 7/8" Roughing Gouge. Machined from solid M42 High Speed Steel, the tool is not only razor sharp but extremely durable and long-lasting. Designed with deep 'U' shape for easy stock removal.

Graced by a solid aluminum handle, the tools is sturdy and you will enjoy easy maneuverability. The specific shape of the handle is designed to fit your hand for comfort. Beautifully engraved and polished, the handle will last a lifetime.

Our premium 7/8" Roughing Gouge is shipped sharp and ready to use!

Features:

• Deep flute allows for easy stock removal
• Made from premium M42 HSS containing 10% cobalt
• Hones to a finer edge
• Superior edge holding ability
• Hardened to 68 HRC
• Hand ground at Carter and Son Toolworks
• Made in USA

Handled Specifications:

UN-Handled is the same specification minus handle Length.