Wood Turning Accessories

Tapered Lathe Drill Chuck

The Morse taper drill chuck works on your lathe tail stock. It will allow you to use your lathe like a horizontal drill press. The chuck will hold forstner bits, twist bits and more with shanks up to 1/2" This gives you the ability to bore out many different types of turning projects like vases, pepermills, boxes and more!

Features:

• Made with heavy duty bearings
• It can be used with bits with shanks up to ½” in total diameter
• Comes with 1 key to quickly tighten or loosen the chuck
• Available in MT-1 or MT-2 arbor sizes

Note: Forstner bit not included.

Off Center Chuck System

Create wonderful looking pendants, box lids, bottle stoppers, refrigerator magnets and more with this unique, eccentric Pendant Chuck. The Pendant Chuck is designed to allow for ”off center” turning on the lathe. Primarily used for small pendant like items to add accents and one of a kind designs to your finished project. Fits Morse Taper 2

Features:

• Primarily used for small pendant like items to add accents and one of a kind designs to your finished project
• Fits Morse Taper 2

Lathe Dowel Chucks

Gripping, centering and securing 3/8" & 1/2" diameter dowels and tenons has never been easier. This chuck is perfect for top, bottle stoppers or where ever a small tenon is required for chucking. The Dowel Chuck is mounted to a threaded steel rod which is fed through the opening in your lathe headstock. A star knob is used to easily secure the chuck to your work piece. Work with lathes with a headstock of 13" or less.

1" Capacity Pen Blank
Drilling Chuck

No Drill Press? No Problem.

Drill a perfectly centered hole in your blank on your lathe using this unique chuck. The chuck includes two 2" jaws that will hold your blanks perfectly centered at the headstock. Mount a drill bit into your tailstock and advance the drill into your blank as it spins on your lathe. Accommondates blanks up 1" Square with no travel limitations of a drill press quill. Jaws are 2" long, Chuck has a 1" x 8 tpi thread, 2-1/2" diameter, weighs only 1.2 lbs, operated by 2 tommy bars (Included).

Bottle Stopper Chucks

These bottle stopper chucks are ideal for turning blanks that will be used on smaller bottle stopper hardware. The chucks have a collar milled right onto the chuck to make the process of sizing the bottle stopper super easy.

Chuck come in three sizes:

• Standard Chuck Item #7588
  • Chuck 1" x 8tpi
  • Collar approximately 29/32" diameter
• Mini Chuck Item #7589
  • Chuck 1" x 8tpi
  • Collar approximately 13/16" diameter
• Micro Chuck Item #7590
  • Chuck 1" x 8tpi
  • Collar approximately 19/32" diameter

Big Bite Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. At 3-3/4" diameter it easily drives pieces up to 24" in diameter but is safely contained inside the body diameter of even our smallest chuck. The spur has a 1" locating plug to center securely into the chuck and it is grabbed crosswise by the jaws for a secure hold. The teeth and point are 60 degrees so it will bite deeply and easily. It takes advantage of the holding power of the chuck, making it very economical.

Note: Chuck not included.

1/2" Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. Because of the direct mounting capability, it is unnecessary to remove the chuck from your lathe to do spindle work. The 1/2" Chuck Spur is great for turning spindles that are less than an inch in diameter. (ie. chair legs) Total length is of Spur is 3".

1" Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. Because of the direct mounting capability, it is unnecessary to remove the chuck from your lathe to do spindle work. The 1" Chuck Spur will work best for anything of an inch in diameter or larger. Total length is of Spur is 3".

OneWay #2 Morse Taper Extender

This recommended accessory lengthens the tailstock barrel.