T-Track & Accessories

Round Knobs

Round Knobs are basic knobs that are small in size and great for those small jig & fixture project or in smaller areas where larger knobs will not work. Knobs are made with durable plastic with steel thread insert for long life.

T-Knobs

T-Knobs are very easy to grip and they are designed to give you maxinum torque when tightening. These knobs have a through hole design for working with any length bolt making it easy to be used for any shop made jigs or can be used for replacement knobs. Knobs are made with durable plastic with steel thread insert for long life.

2" Studded Star Knobs

2" Studded Star knobs are 5 point knobs that allow your fingers to fit into the grooves making it easy for turning and gripping. Has a 2" stud making it versatile for most of your common shop jigs & fixtures. Knobs are made with durable plastic with steel thread insert for long life.

Star Through Hole Knob

Star Through Hole Knobs are 5 point knobs that allow your fingers to fit into the grooves making it easy for turning and gripping. These knobs have a through hole design for working with any length bolt making it easy to be used for any shop made jigs & fixtures or it can be used for replacement knobs. Knobs are made with durable plastic with steel thread insert for long life.

Star Knobs & Bolts

High Quality Star Knob and bolt Can be used for shop made jigs & fixtures. Replacement for that lost knob. Knobs are made with durable plastic with steel thread insert for long life.

This 1/4" x 20 tpi Knob and Bolt is used with our Mini-T-Track and fences that use a 1/4" bolt to hold and work attachments.

This 3/8" x 16 tpi Knob and Bolt is used with our Standard i-T-Track and fences that use a 3/8" bolt to hold and work attachments.

Post Knobs

Post Knobs are great for jig & fixtures where the common knob isn't easy to get to. Post knobs allow you easy access for tightening and loosening bolts without trying to reach into a hole or where bolts are up against an edge making it virtually impossible to get to. Great for use on secure router table fences and bandsaw fences. Knobs are made with durable plastic with steel thread insert for long life.

Easy Grip Knobs

Easy Grip Knobs have the same features as the Post knobs , but with the added grip for when you need more torque, Easy Grip Knobs are great for jig & fixtures where the common knob isn't easy to get to.Easy Grip Knobs allow you easy access for tightening and loosening bolts without trying to reach into a hole or where bolts are up against an edge making it virtually impossible to get to. Great for use on secure router table fences and bandsaw fences. Knobs are made with durable plastic with steel thread insert for long life.

Easy Grip knobs are 4" long

Ratchet Knobs

Ratchet Knob are perfect where other knobs are impossible or impractical to get to. Great for jig & fixtures where bolt is up against part of the jig making it didiffacult or impossible to turn a common bolt. Featureing a push button rachet clutch, just hold button down and pull up on lever to release clutch. Knobs are made with durable plastic with steel thread insert for long life.

Comes in both male and female Rachet Knobs.

1/4" x 20 tpi Knob & Bolt 10 Pack

For those of us who work in a shop environment or have a garage type workshop, odds are that you will come across an accessory or two that uses this type of ¼” by 20 tpi through-hole knob and bolt. 10 knobs, bolts and washers to use anywhere in your shop for jigs, fixtures, accessories and more!
›See more product details

×

1/4" x 20 tpi Knob & Bolt 10 Pack

For those of us who work in a shop environment or have a garage type workshop, odds are that you will come across an accessory or two that uses this type of ¼” by 20 tpi through-hole knob and bolt. Or maybe you like to build your own jigs and fixtures for jobs you do over and over again. Either way you are going to need a few of knob and bolts like these to secure or affix your jigs and fixtures through out your shop.

Typically, these through-hole knobs and bolts are used with mini slot track (NOT INCLUDED), however, the 1½” long bolts can fit through ½” or ¾” thick stock to secure or affix most any type of object. Trying to find the right length bolt is always a challenge but NOT with this through-hole knob. The top of the knob is open so that the bolt can pass through the knob no matter what length bolt you use. This makes using this knob with any project quick and simple.

10 Pack of Knobs, Bolts and Washers for use in T-Track,Universal Track, and Double Cut

10 durable, 3 wing through-hole knobs with 1/4" by 20 tpi steel threads, 10 flat steel washers and 10 each 1-1/2" long by 1/4" by 20 tpi steel bolts combine to give you enough knobs and bots to secure multiple types of jigs, fixtures and accessories throughout your workshop! These knobs and bolts are ideal for all levels of woodworking, mechanics, do it yourselfers, auto body shops, marine recreational vehicles or where ever you need to temporarily secure something. Made from a durable plastic material, the knobs have been built to last!

Calling it versatile just may be an understatement

When describing where you can use these through-hole knobs and bolts, it truly is an understatement to simply call them versatile. The through-hole knobs and bolts can be used in so many different ways and on so many different fixtures and accessories that you are sure to get your money's worth much sooner rather than later. From work shop environments to industrial settings, these knobs and bolts are a must have!

Quality parts, made from quality materials

• Durable polythylene plastic through-hole knob stands up to years of use and harsh workshop environments
• The steel thru hole design allows the bolt to be threaded clean through the other side of the knob
• The flat steel washer prevents the knob from digging in or sticking to the material
• The 1-1/2" long bolt is the ideal size for most common projects. It may of course be swapped out for a longer bolt (not included) in needed.

Fits multiple profiles of aluminum track

With the 1/4" x 20 tpi bolt size being so common, many manufacturers have chose to design track to accept this bolt head size. This is true throughout the track manufacturing industry. This means that in all likelihood you may already have the right track in your home or workshop. Ideally, you want a track that provides the least amount of play or slop when the bolt is inserted into the track. Most double cut or universal tracks are made for "t-bolts" as well as hex head bolts.The ideal type of track to use for your projects is a High-end Anodized Mini T-Track that has been specifically designed to accept hex head bolts. This ensures the least amount of play when the bolt is inserted and it also makes sure the bolt won't slip out. This kit is ideal for working with this type of Mini T-Track.

This Handy Pack of Knobs and Bolts includes:

• 10 each 1/4" x 20 tpi through-hole knobs
• 10 each 1-1/2" long x 1/4" x 20 tpi bolts
• 10 each flat washers

Close

Quality parts, made from quality materials

• Durable polythylene plastic through-hole knob stands up to years of use and harsh workshop environments
• The steel thru hole design allows the bolt to be threaded clean through the other side of the knob
• The flat steel washer prevents the knob from digging in or sticking to the material
• The 1-1/2" long bolt is the ideal size for most common projects.

This Pack of Knobs and Bolts includes:

• 10 each 1/4" x 20 tpi through-hole knobs
• 10 each 1-1/2" long x 1/4" x 20 tpi bolts
• 10 each flat washers