Tablesaws & Accessories
Freud Plywood, Laminate & Melamine Blades
|
||||||||||||||||||
|
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Excellent finish on the top and bottom of laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max) Machine Use: Miter Saw, Table Saw, Radial Arm Saw, Panel Saw Materials: Laminates, Chip Board, Melamine, Veneered Plywood and Other Manmade Materials |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Excellent finish on the top and bottom of laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max) Machine Use: Miter Saw, Table Saw, Radial Arm Saw, Panel Saw Materials: Laminates, Chip Board, Melamine, Veneered Plywood and Other Man-made Materials |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.
Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max) Machine Use: Miter Saw, Table Saw, Radial Arm Saw, Panel Saw Materials: Veneered Plywood, Chip Board, Melamine & Laminates |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.
Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max) Machine Use: Slide Miter Saw,Table Saw,Radial Arm Saw Materials: Veneered Plywood, Chip Board, Melamine & Laminates |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!
Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max) Machine Use: Miter Saw, Table Saw, Radial Arm Saw, Panel Saw Materials: Veneered Plywood, Chip Board, Melamine & Laminates |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!
Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max) Machine Use: Miter Saw, Table Saw, Radial Arm Saw, Panel Saw Materials: Veneered Plywood, Chip Board, Melamine & Laminates |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD™ coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 5° hook angle and a triple chip grind provide fast cuts and long cutting life
Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2" min to 2-3/4" max) Machine Use: Miter Saw,Table Saw,Radial Arm Saw,Panel Saw Materials: Laminates, Chip Board, Melamine, Veneered Plywood and Other Manmade Materials |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish
tacked Chipboard And Manmade Materials. Crosscuts (1/2" to 2-3/4") & Rips (3/4" to 3/8" ). Machine Use: Miter Saw,Table Saw,Radial Arm Saw,Panel Saw Materials: Laminates, Chip Board, Melamine, Plywood, Composition Material, Hardwood and Softwood |
|||||||||||||||||
|
||||||||||||||||||
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||
|
||||||||||||||||||