Tablesaws & Accessories

2 in 1 Safety V Push Stick - 2 Pack

If you have ever milled a narrow piece of stock on your table saw or router tabletop then you know how dicey it can get. Trying to control your stock while your fingers are dangerously close to the blade or cutter is something to avoid altogether. The Patented 2 in 1 Safety-V Push Stick is the perfect solution to help keep your fingers out of harms way

Non-Slip Foam Rubber Pad Grips to Most Any Type of Material

The push sticks have a foam rubber base to offer even more control than standard V or L style push sticks. The non-slip foam rubber pad is approximately 3/16” thick and will grip to most any type of material like smooth sanded wood, rough wood or composite materials.

Use Like a V-Style Push Stick

With a soft, receptive foam rubber pad and a natural hook on the back end, you can control your stock while feeding it through the table saw blade

Use Like a Standard Notched Push Stick

The unique 90 degree front end notch allows you to use this V-Style push stick like a standard push stick giving you the best of both worlds

Magnetic Push Stick - 2 Pack

The perfect safety accessory addition to any workshop!

When you need to cut a narrow piece of stock on a table saw we know that it can be a little dicey or intimidating. Many of us try to cut the piece we need on the outside of the blade rather than dealing with narrow cuts. However, cutting narrow stock is sometimes unavoidable. In this case it is recommended that you use a safety device such as a push stick to help feed the stock through. Push sticks also help you safely push a workpiece, keeping it flat against a table top while it is being cut.

You can never have too many push sticks...

Typically we use push sticks on table saws when pushing narrow or smaller stock though. The push stick can also be used elsewhere in the shop like on router tables, jointers and band saws. Why not have at the ready on each of those machines? Or at the very least one on two machines. Another reason you may want to have more than one push stick is in case one does come in contact with a cutter or blade and becomes unusable. Its always good to have a backup just in case!

At a moments notice...

Having your tools around when you need them is one thing. Having your tools ready at a moments notice is another thing altogether! The Push Stick with Magnetic Handle is perfect for keeping one of your most used tools ready and by your side!

Keep your fingers where they belong...

Push sticks keep your precious body parts away from the blade or cutter and allow for a smoother, cleaner and best of all, more controlled cut when used properly. If you've ever had that "funny" feeling when making a "free hand" cut, odds are you should be reaching for a push stick the next time you make that same cut. The basic idea behind the push stick is to keep your fingers a long way from the blade or cutter when feeding your stock through.

Works well with others

While push sticks work great on there own, from time to time you may need a little assistance with your cuts. Push sticks can be used with featherboards, push blocks, safety v push sticks or even another push stick.Being a handy tool on its own, the push stick is versatile enough to be used most anywhere and with most any tool in your shop!

Magnetic Handle Push Stick

• 3/8" Push Stick: Makes it possible work stock as narrow as 1/2" wide. The push stick is made from durable poly material that will not shatter upon impact or contact with a blade.
• 90 Degree Notch: With a 90 degree notch and a relief circle to accept the 90 degree corner of your stock. It is designed to be at the ideal angle to the handle and allows for even pressure while pushing stock through the cutter or blade.
• Two Embedded Magnets: Some magnetic push sticks come with only one magnet. This typically cause the push stick to fall or start rotating when the machine is turned on. With our two embedded magnets, you push stick stays exactly where you placed it!
• Ergonomic Handle: A larger, well balanced and more robust handle than most push sticks. This handle provides you with a more comfortable grip and larger thumb indents while pushing your stock through.

Power Grip V Style Push Stick

If you have ever milled a narrow piece of stock on your table saw or router tabletop then you know how dicey it can get. Trying to control your stock while your fingers are dangerously close to the blade or cutter is something to avoid altogether. The Power Grip V-Style Push Stick is the perfect solution to help keep your fingers out of harms way and control your workpiece at the same time. The push stick has a foam rubber base to offer even more control than standard V or L style push sticks.

Comfort Grip Handle

The comfort grip handle on the Power Grip V-Style Push Sticks are wider and thicker than the actual push stick itself. The reason we made the handle larger is to make sure we gain even more control and leverage. We made the push stick a bright orange so you have the ability to see the push stick when in use. This ensures that you can see exactly where you are placing the push stick in relation to the blade, the cutter and your stock at all times.

Grips to Most Any Type of Material

The non-slip foam rubber pad is approximately 3/16” thick and will grip to most any type of material like smooth sanded wood, rough wood or composite materials. The pad measures approximately 6-1/4” in length which provides you with enough gripping surface area to control the stock though your table saw and router table. The width of the foam is slightly skinnier than the push stick itself so that it will slide smoothly against your fence without hanging up on the foam rubber.

90 Degree Notch on the Inside End of the Foam Pad

The push stick has a 90 degree notch on the inside end of the foam pad with a relief circle cutout to accept the 90 degree corner of your stock. The base is offset under the handle creating a notch which helps makes sure that your stock won’t slip out the back when running your stock through the table saw blade or router bit. The overall length of the push stick is approximately 8-9/16”.

Well Balanced with an Extra Wide Base

The body width on the Power Grip V Style Push Stick is extra wide to help provide you with even more control than a standard push stick. These push sticks start at 9/16” wide and are tapered up to 3/4” at the base. While most standard v style push sticks are much thinner. The extra width not only helps provide more control, it also provides you with a more stable gripping surface. In addition, the pads are very easy to clean.

5 Piece Safety Push Block And Safety Stick Kit

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Keep your fingers out of harms way...

This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Orange for Safety

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

Why pay more?

• Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
• The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

Keeping Your Distance Is Key

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

Durable and Built to Last!

Each device in this set is made from a super durable polymer plastic to stand up to everyday use. They are almost indestructible! Each of the blocks with foam pads are designed to grip the material. If they become built up with dust and debris, clean them with warm soapy water and let them dry for at least 24 hours before using them again.

4 Piece Woodworking Safety Kit

Keeping your fingers and hands away from sharp cutters and blades in your workshop should be priority number one for any woodworker. Thats why we have created this one of a kind safety kit!



This 4 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow, magnetic push stick, to the versatile feather board, this kit has all the bases covered in regards to many different woodworking applications.

Use The 4 Piece Safety Kit Throughout Your Workshop...

Deluxe Multi-Mount Feather Board

This feather board can be used on a table saw, router table, shaper table or even your router fence! You can secure the feather board into standard 3/4" wide by 3/8" deep width miter slots using the innovative expanding miter bars.The feather board can also be secured using the supplied t-bolts. The t-bolts can secure the feather board to 1/4" t-track slots like those found on some router tabletops and router table fences.

Magnetic Handle Push Stick

The magnetic handle push stick is perfect for pushing stock through on a table saw. It works exceptionally well when used in conjunction with the feather board. One of the "handiest" features of this push stick is that we have embedded two magnets into the handle. This allows you to stick it right to the side of your metal table saw cabinet so its ready at a moments notice!

Straight Handle Push Block

The straight handle push block is a sturdy, conventional style push block. Designed to be used on jointers, this block can also be used on other machines throughout your workshop like router tables and band saws.

Angled Handle Push Block

The angled handle push block provides the user with more leverage when pushing stock through cutters. This push block works very well on heavier stock being fed through a jointer.

Works on Router Tables, Table Saws and Band Saws!

We have equipped this feather board with two different sets of mounting hardware. Depending on your needs for the feather board, you can either mount it vertically or horizontally. It comes with two expandable metal miter bars so the feather board can be secured to a standard 3/4" wide by 3/8" deep miter slots like those found on most woodworking machinery. The unit also comes with t-bolts for mounting or securing the feather board to 1/4" t-track slots like those found on some router tabletops and router table fences. These mounting options make this feather board super versatile and a must for any workshop!

Use The 4 Piece Safety Kit Throughout Your Workshop...

Push Stick on Table Saw

When feeding narrow stock through your table saw blade, it is a good idea to use a push stick to help control your stock.The push stick has a 90 degree notch on the end with a relief circle to accept the 90 degree corner of your stock giving you maximum control while keeping your hands from away from the blade

Feather Board on Router Tables

When pushing or feeding you stock through on a router table, we need to have control of our stock. Using a feather board to hold your stock down while pushing it through makes the milling process safer. The feather board can be used on the fence or table top.

Push Block on Band Saws

The band saw is the perfect machine for re-sawing your stock. Cutting thin slices of wood on the band saw can get a bit dicey when your hands get near the blade. Always reach for a push block when re-sawing your stock to be sure your hands and fingers stay away from the blade at all times.

Push Blocks on Jointers

Jointers generate a lot of force with the rotating cutter heads removing a lot of material at once. To help control your stock, it is a good idea to grab two push blocks to help control downward pressure as well as forward pressure while you feed your stock through the cutters.

Whats in the Box?

This kit includes:

• 1 each Deluxe Multi-Mount Feather Board with Mounting Hardware
• 1 each Magnetic Handle Push Stick
• 1 each Straight Handle Push Block
• 1 each Angled Handle Push Block
• 1 each Basic Instruction Sheet