Tablesaws & Accessories
Miter Gauges
|
||||||||||||||||
|
Featuring 4 NoPlay Expandable Glides for a perfect fit into your ¾” x 3/8” miter
slot. This miter gauge also features an adjustable protractor style head with a
super slick UHMW protective base pad, along with a bright red, easy to see
cursor and steel miter bar. The Dual 45° End Aluminum Fence is ideal for zero
clearance supported cuts
NoPlay Miter Gauge 2000 SE HDFFeaturing 4 NoPlay Expandable Glides for a perfect fit into your ¾” x 3/8” miter slot. This miter gauge also features an adjustable protractor style head with a super slick UHMW protective base pad, along with a bright red, easy to see cursor and steel miter bar. The Dual 45° End Aluminum Fence is ideal for zero clearance supported cuts 
Patent Pending Expandable GlidesThe patent pending Expandable Glides are the simplest way to achieve an ideal miter bar fit into your miter slot. Once in the miter slot, adjust your NoPlay Expandable Glides by rotating the machine screw until the glide applies just the right amount of pressure to the side wall of your slot. Adjust the remaining glides for a perfect fit. 
Super Slick Base PadThe protractor style head features a super Slick Base Pad on the bottom to give you the perfect slick surface to slide smoothly along your table top. Not only does the pad slide smoothly, it also protects your table top from getting scratched or marred. The protractor head also features 13 positive stops for quick common angle adjustments. 
Easy Angle AdjustmentsA bright red handle and a bright red cursor make for easy angle adjustments that you can easily see. Loosen the handle, rotate the protractor style head and once your position is set, tighten the handle to lock the angle in place. If your angle is one of the positive stops, you must still use the handle to loosen and lock the head into place. 
13 positive stop holes13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used. 
Premium Aluminum Dual 45° End FenceThe Premium Aluminum Dual 45° End Fence is the perfect fence for accurate angled cuts. The Dual 45° Ends allow you to get tight to the Sawblade when cutting 45’s. This helps support your stock and prevents the potential for dangerous kickbacks. The fence is completely adjustable and can be removed if needed. 
Features:
|
|||||||||||||||
|
California Residents:
 WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
 |
||||||||||||||||
|
||||||||||||||||
|
If you own a table saw and you need to make a crosscut at any angle then you
know how valuable a miter gauge can be. You may also know that the miter gauge
that came with your saw is not terribly accurate or durable. Not to mention that
the fit in the miter slot may not be all that great as well. The Fulton Miter
Gauge is a high quality, well thought out and economical solution to your table
saw cross cutting needs.
Precision Miter GaugeIf you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs. Fulton Precision Miter Gauge
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
The Fulton Miter Gauge is a high quality, well thought out and economical
solution for your table saw cross cutting needs.The Aluminum Miter fence is
equally well thought out with its 45 degree ends for unsurpassed workpiece
support and its ability to mounted to most any miter gauge. Also included is a
handy aluminum flip stop for repetitive angled cuts on your table saw. Together
these three items are the perfect compliment to each other for your table saw
cutting needs. Made from a single piece of extruded aluminum, this precision
miter gauge fence is not only durable, its accurate and saves setup time.
Precision Miter Gauge with Aluminum Miter FenceThe Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs. Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip StopWe've all done the research or at the very least heard about miter gauges with fence systems that are very accurate, easy to adjust and make cross cutting angles on your table saw super easy. While that all sounds great, all those great features usually costs a lot. That is until now! The Fulton Precision Miter Gauge with Aluminum Miter Fence and Flip Stop comes packed with all those great features and more. The best part is that it is reasonably priced so that most any woodworker can afford it! 
Be Precise with EaseIf you have ever used a factory supplied miter gauge, then you know how limiting it can be. The Fulton Miter Gauge with Aluminum Fence and Stop makes the angle cutting process a breeze. Once the gauge is set and the fence is properly adjusted, cross cutting angles on your table saw just became a whole lot easier than just using a miter gauge by itself. When this aluminum fence is used with the Fulton Miter Gauge, you'll be able to repetitively cut angle stock all day long with precise results! 
MAXIMUM Workpiece Support FenceMade from a single piece of extruded aluminum, the precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary. When designing the fence for this system we kept having the same issue happen over and over again. The standard 90 degree end on most miter gauge fences made the fence to saw blade gap too large and the wood kept binding in that gap. Our solution was to simply cut the fence ends at a 45 degree angle so that the fence can get as close as possible to the blade with minimal stock over hang. This helps prevent binding and produces a much cleaner cut. 
Convenient Aluminum Flip StopIncluded with the fence and miter gauge is a convenient flip stop for making repetitive cuts. Simply slide the flip stop to the exact position you need it to be, lock it in place and you're ready to go! When the stop is not needed you can either remove from the fence or simply lift the stop upwards and out of the way until it is needed. When not in use the flip stop can be flipped up and out of the way. 
Accurate and Easy to Adjust HeadThe Fulton Miter Gauge is loaded with great features.
Left Side, Right Side or Even Upside Down...For the most part, we tend to cut on one side of our table saw the majority of the time. It usually depends on the saw or just simply preference. This is why we included two different sticky back (PSA pressure sensitive adhesive) tapes so you can choose which direction you need. We also know that some of use like to do things a little differently. If you are looking down at your miter fence from above then it may make sense for some of us to place the tape on to the aluminum fence upside down in relation to the miter gauge. This allows for you to be able to clearly read the measurements on the tape. 
Standard Size Miter Bar 3/4" x 3/8"The head is mounted to a solid steel miter bar that measures 18" in length and is .354" thick by .730" wide. Standard miter slots are 3/4" x 3/8" with a 1/8" "T" slot (slight variances from brand to brand) running the length on the bottom of the slot. This means it will fit into most table slot miter slots. The miter bar also features spring loaded plungers that can be adjusted (with a hex key wrench) for just the right fit so you have a smooth push through every time. Features:
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
When cutting mitered angles with your table saw you always want to make sure
that have enough support of your stock when feeding it through the blade. The
table saw blade is rotating toward you at a high rate of speed and if your
workpiece moves to the side, the result can be scary and downright dangerous.
With the help of a miter gauge and with our Aluminum Miter Fence secured to it,
you will have full support all the way up to the blade on most of your miter
angle cuts.
Universal Miter Gauge FenceWhen cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts.
The Aluminum Miter Fence has been cut at 45 degrees on both ends
of the fence. Doing this allows you to get as close to the blade
as possible so your workpiece is fully supported throughout the
cutting process. Straight cut or 90 degree cut fences have a
large gap between the fence and the blade because it can not get
as close with the straight cut ends on the fence.
Cross Cut Angles on Your Table Saw
While a simple miter gauge works pretty well when it comes to
cutting angles on your table saw, the miter gauge by itself does
not offer much support near the blade when making cuts. In steps
the versatile and easy to install Fulton Aluminum Miter Fence!
Designed to Be VersatileThe Fulton Aluminum Miter Fence has been designed so it will fit most major brands of miter gauges. From the Precision Kreg Fence to the high end INCRA miter gauge systems to most every standard gauge in between, the Fulton Aluminum Miter Fence will likely fit. The mounting slot on the back of the gauge can be used with standard height gauges and the fence can also be flipped upside down so the slot will accommodate lower profiled miter gauges! 
Does it Fit Your Old Delta Gauge???The short answer is, why yes, yes it does! The longer, but not difficult to understand answer is that the fence should fit most older gauges with the holes that are already in the miter gauge head. If there aren't any holes or they just don't line up, we have provided instructions on how to use a block of wood to remedy this or how to modify the miter gauge itself to attach the Fulton Aluminum Fence. 
Max Support Every Time!Many miter gauge fences have flat or 90 degree ends. While this style of fence kind of works, it is not the optimal way of fully supporting your stock piece through the cutting process. The Fulton Aluminum Miter Fence features 45 degree cut ends which allows you to achieve full support all the way up to the blade. This helps prevent pinching or binding while cutting which ultimately helps prevent dangerous kickbacks. 
Make your cut and accurately repeat...When you need to cut multiple pieces to length, nothing is more frustrating than having to move your piece into position, measure and adjust your piece again until you hit your mark. With the Fulton Flip Stop, repeititve cuts on your table saw is super easy and super quick. Simply slide the stop into position, lock it in place, lower the stop and slide your stock piece up against the stop. Now your ready to make precise length cuts each and every time! 
Left or Right? In this case, there's no wrong answer.We have included a left reading tape and a right reading tape. The reason we have done this is simply for the fact that some prefer one to the other and some saws dictate which one you will use. Also keep in mind that you can always flip the tape upside down in relation to the fence so that you can read the tape when looking down on the fence from above.
Many times when we make miter cuts on our table saw, we need 2
or more pieces that are the exactly same length. While using the
included measuring tapes that are included are pretty good at
this, we have also included a handy flip stop that locks into
any location along the length of the fence. This allows you to
make repetitive length cuts without worrying if the pieces will
end up the same. The flip stop can can simply be flipped it up
and out of your way when not in use.
Features:
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
Miter Extension Fence |
||||||||||||||||||||||||
|
The 22'' Miter Extension Fence was designed for the table saw miter gauge.It will improve work support close to the blade and will work on the left side or right side of your saw.The adjustable extruded aluminum fence increases the face of your miter gauge and has a built in extension bar to increase the stop capacity to 36''. The 48'' Miter-T-Fence is designed for your miter saw with a built in extension capacity of 86''. This fence can be used in conjunction with the 22'' or anoter 48" fence to give your miter saw a fence for both sides for the ultimate fence system your shop will ever know. The 22'' or the 48" Miter Extension Fence can be added to your Miter saw and/or your drill press for longer more durable fence system. It's perfect for repetitive cuts and drilling holes with the included stop block. The stop block will slide back and forth along the top channel of the miter fence. The fence can be easily taken on and off any of the tools to switch back and forth between tools. Both fences include
|
|||||||||||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||||||||||||||
|
||||||||||||
|
Get unmatched precision and accuracy with the turn of a dial with SawStop’s
Revolution Miter Gauge. Setting angles is quick and easy using the intuitive
geared dial system, set in increments of 1°, 1/2°, 1/4°, or 1/10° with a
positive “click” in each notch, or bypass the gear system for free turning. The
extruded aluminum telescoping fence provides a solid reference surface for
workpieces, with a maximum crosscut of 37-1/2” using the included flip stop.
Revolution Miter GaugeGet unmatched precision and accuracy with the turn of a dial with SawStop’s Revolution Miter Gauge. Setting angles is quick and easy using the intuitive geared dial system, set in increments of 1°, 1/2°, 1/4°, or 1/10° with a positive “click” in each notch, or bypass the gear system for free turning. The extruded aluminum telescoping fence provides a solid reference surface for workpieces, with a maximum crosscut of 37-1/2” using the included flip stop. The miter angle dial has preset increments of 1°, 1/2°, 1/4°, or 1/10° with tactile feedback so you can feel your desired angle click into place, making angle adjustments reliably accurate - quick and easy. 
SawStop Revolution Miter Gauge
|
|||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
Engineered to bring can’t-miss accuracy to any table saw, the Scale Miter Gauge
(SMG) features a protractor head with a pointer-and-notch alignment mechanism
that locks in 181 precise angles. Anchor that to a premium adjustable miter bar
and add a heavy-duty extendable fence and micro-adjustable flip stop for making
repeated cuts of the same length, and you have a premium miter gauge that will
take your woodworking to a whole new level of accuracy.
Scale Miter GaugeEngineered to bring can’t-miss accuracy to any table saw, the Scale Miter Gauge (SMG) features a protractor head with a pointer-and-notch alignment mechanism that locks in 181 precise angles. Anchor that to a premium adjustable miter bar and add a heavy-duty extendable fence and micro-adjustable flip stop for making repeated cuts of the same length, and you have a premium miter gauge that will take your woodworking to a whole new level of accuracy. 
SawStop Scale Miter Gauge
|
|||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
Why spend your time calibrating a miter gauge when you can get amazing accuracy
right out of the box? Our Precision Miter Gauge System requires no calibrating,
and features positive stops at 0°, 10°, 22-1/2°, 30° and 45° to make it easy to
cut accurate miters quickly.
Precision Miter Gauge SystemWhy spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22-1/2°, 30° and 45° to make it easy to cut accurate miters quickly.Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree. Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts. 
Perfect Miters, Fast!Precision is the name of the game for this CNC-milled miter gauge. We worked to build accuracy into every feature of this product, from the rugged aluminum fence, to the solid yet versatile Swing Stop, to the easy-to-use yet amazingly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success. Precision Lens CursorSimilar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time. 
No Play in the Miter SlotOur extremely straight 24" (610mm) anodized-aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide, and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screw driver. 
Swing StopThe Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it. That means you can quickly square one end of a board, flip it around, and then cut it to final length without ever moving the stop. Features:
|
|||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
The INCRA 1000SE, has all the great features of the popular INCRA Miter1000 plus
more! The Special Edition adds a stainless steel Vernier cursor for an
incredible 1/10th degree resolution between fixed steps. The Special Edition
also includes a miter fence that telescopes from 18" to a full 30" in
length with the new INCRA Flip Shop Stop for patented Automatic Positioning
Control.
Miter Gauge Special EditionThe INCRA 1000SE, has all the great features of the popular INCRA Miter1000 plus more! The Special Edition adds a stainless steel Vernier cursor for an incredible 1/10th degree resolution between fixed steps. The Special Edition also includes a miter fence that telescopes from 18" to a full 30" in length with the new INCRA Flip Shop Stop for patented Automatic Positioning Control. The saw tooth rack system instantly controls the length of your cut with INCRAs legendary machine shop accuracy as the dual Flip arms provide flexibility. The Flip Shop Stop is equipped with three sliding stop rods that operate independently or in tandem for one, two, or three simultaneous stop positioner setups.  Features
|
|||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||||||
|
The INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series.
The HD stands for High Definition, because the protractor plate's exclusive
Angle LOCK Indexing System has a whopping 180° can't-miss angle stops in
1° increments with special stops located at 22-1/2°.
Miter GaugeThe INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition, because the protractor plate's exclusive Angle LOCK Indexing System has a whopping 180° can't-miss angle stops in 1° increments with special stops located at 22-1/2°. Combine that high-resolution protractor with the industry's smoothest adjustable miter bar, a telescoping Incra LOCK Cut-off Fence and Flip Shop Stop and a steel vernier scale that reads to 1/10-Degree and you've got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will allow you to precisely set and quickly duplicate any angle you might need, whether it's 18° for cutting 10 sides, 25.7° for 7 sided objects or anything else imaginable.  Features
Features:
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
Get perfectly accurate miter cuts with Incra's Miter V27 Miter Gauge featuring
27 angle stops for precise incremental control. This affordable gauge is a high
performance miter gauge designed to fit your table saw, band saw, router table,
disk sander, or belt sander like a glove. While the V27 delivers all of the
accuracy of its bigger Incra Miter Gauge brothers, its no-nonsense design and
compact size make it the most affordable Incra miter gauge in its class.
Miter Gauge V27Get perfectly accurate miter cuts with Incra's Miter V27 Miter Gauge featuring 27 angle stops for precise incremental control. This affordable gauge is a high performance miter gauge designed to fit your table saw, band saw, router table, disk sander, or belt sander like a glove. While the V27 delivers all of the accuracy of its bigger Incra Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable Incra miter gauge in its class. The V27 delivers extreme miter cutting accuracy thanks to Incra's exclusive AngleLOCK indexing system and adjustable GlideLOCK Miter Bar. Equipped with Incra's exclusive AngleLOCK Indexing System, the MITERV27 offers 41 locking angle stops in 5-degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Special stops at plus or minus 22-1/2 degrees for optimal versatility. Features
Incra's Flip Shop Stop offers instant, repeatable accuracy for less downtime and more productivity. Dual, pivoting flip arms mean dead on accuracy. The machine bar is fitted with Incra's exclusive top-mounted, T-slot retainer clip, which is easily removed for use in non-T-slot channels. Four expansion points adjust for zero side play, anti-friction travel on all tools with standard miter gauge channels, including Delta, Craftsman, and imports. This means the bar won't wiggle around in the miter slot. Also, with the Universal Mounting Bracket that supports any user-made fence as well as any Incra fence, it's possible to put an Incra Miter Gauge in every standard miter channel in your shop. Features:
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
Don't let the small size fool you! The NEW INCRA Miter V120 puts
high-resolution, repeatable accuracy within the budget of every woodworkers. An
incredible 120 angle stops are laser cut into the steel protractor, with a stop
available for every whole degree and two special stops at 22.5 Degrees for
cutting eight-sided frames and mouldings. All of that precision is built into a
sturdy, no-fuss package that's compact enough to fit machines where other miter
gauges can be a tight squeeze, such as band saws and disc sanders.
Miter Gauge V120Don't let the small size fool you! The NEW INCRA Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 Degrees for cutting eight-sided frames and mouldings. All of that precision is built into a sturdy, no-fuss package that's compact enough to fit machines where other miter gauges can be a tight squeeze, such as band saws and disc sanders. All-steel construction makes it an excellent long-term investment, and it's also upgradable as your needs change - the V120 can be equipped at any time with any IncraLOCK miter gauge fence and stop. The steel miter bar is equipped with four patented GlideLOCK adjustment points for a perfect, low-friction fit in a wide variety of machines using a standard miter slot. As with all INCRA crosscutting tools, a removable T-slot retaining clip is included, and the adjusters are accessible from the top for quicker set up than traditional miter bars with side-mounted adjusters.
Features:
Features:
|
|||||||||||||||
|
California Residents:
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
