Shop Safety

MagJig 60

The Ultimate Workholding Clamp. Nothing else like it – ever! 60 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding.
›See more product details

×

MagJig 60

The Ultimate Workholding Clamp. Nothing else like it – ever! 60 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence. Not limited by the miter slot or table edge. Use in your custom jigs and fixtures by drilling a hole using a Forstner bit into standard 3/4” stock. Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. Also for use with the Magswitch Workholding System as it fits in our Universal Mounting Base. We recommend use of two per fixture to avoid pivot.

Features

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Up to 60 lbs of break away force

Close

Features:

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Off
• Ideal for jig placement flexibilit
• Up to 60 lbs of break away force

Note: Do not use for lifting

MagJig 95

The Ultimate Workholding Clamp. Nothing else like it – ever! 95 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence.
›See more product details

×

MagJig 95

The Ultimate Workholding Clamp. Nothing else like it – ever! 95 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence. Not limited by the miter slot or table edge. Use in your custom jigs and fixtures by drilling a 30mm hole using a Forstner bit into standard 3/4” stock. Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. Also for use with the Magswitch Workholding System as it fits in our Universal Mounting Base. We recommend use of two per fixture to avoid pivot.

Features

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Uses Standard 30 mm Forstner drill bit for mounting
• Up to 95 lbs of break away force

Close

Features:

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Of
• Ideal for jig placement flexibilit
• Uses Standard 30 mm Forstner drill bit for mounting
• Up to 95 lbs of break away force

Note: Do not use for lifting

MagJig 150

The Ultimate Workholding Clamp. Nothing else like it – ever! 150 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding.
›See more product details

×

MagJig 150

The Ultimate Workholding Clamp. Nothing else like it – ever! 150 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence. Not limited by the miter slot or table edge. Use in your custom jigs and fixtures by drilling a 40mm hole using a Forstner bit into standard 3/4” stock. Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. Also for use with the Magswitch Workholding System as it fits in our Universal Mounting Base. We recommend use of two per fixture to avoid pivot.

Features

• Fast Setup & Securing
• Uses standard 3/4" material Strong Hold!
• Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Uses Standard 40 mm Forstner drill bit for mounting
• Up to 155 lbs of break away force

Close

Features:

• Fast Setup & Securing
• Uses standard 3/4" material Strong Hold!
• Strong against shear force.
• Easy On/Off
• Ideal for jig placement flexibilit
• Uses Standard 40 mm Forstner drill bit for mounting
• Up to 155 lbs of break away force

Note: Do not use for lifting

MagSquare 165

Imagine a strong clamp that turns on in an instant, wont damage the wood surface, and mounts anywhere on a steel table...well, its a reality with Magswitch general purpose Mag-Square. Use Mag-Squares as guides or positional stops for work-holding. The Mag-Square is more versatile than clamps, faster and easier to use! Simply twist knob on or off to apply or release super strong magnetic grip.
›See more product details

×

MagSquare 165

Imagine a strong clamp that turns on in an instant, wont damage the wood surface, and mounts anywhere on a steel table...well, its a reality with Magswitch general purpose Mag-Square. Use Mag-Squares as guides or positional stops for work-holding. The Mag-Square is more versatile than clamps, faster and easier to use! Simply twist knob on or off to apply or release super strong magnetic grip.

Features

• Fast Setup & Securing
• Uses standard 3/4" material Strong Hold!
• Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Uses Standard 40 mm Forstner drill bit for mounting
• Up to 155 lbs of break away force

Benefits

• Super fast setups, instant work-holding
• On/off control—no fighting the magnet, precise positioning
• Stays clean—when turned off, debris falls off
• Instant work-holding anywhere on a steel surface
• Create your own fabrication jigs by mounting in M5 holes
• Grips flat and pipe Productivity

Advantages

• Execute setups with unprecedented speed
• Time savings in the shop will be significant
• Strong magnet lets you do more of the heavy work with a magnet
• No batteries
• No electricity

Every woodworker knows that multi purpose work holding tools are handy, and application challenges arise in tool set ups, jigs and fixtures. Mag-Squares offer flexibility in quick connect, disconnect, strong hold, squaring, precise positioning, and mounting versatility.

Close

Features:

• On/off Magswitch magnet control
• Turns all the way off—stays clean
• Strong magnet 165 lb. (68 kg) of hold force
• M5 * 8 threaded holes on all sides
• Machined at 90°
• Magnetic grip on 5 sides—strong on 3 sides
• Pipe notch

Starter Kit

The Perfect entré into the Magswitch Workholding System. The Starter Kit comes complete with the Reversible Featherboard Attachment, the Universal Mounting Base and two MagJig 150's. Once you have this tool, get all the other great tool attachments and simply mount to the base as needed. Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Not limited by the miter slot. Featherboard is reversible for left and right hand feeds. Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks. Low profile design for use on your smallest tables.

Includes:

• 1 ea. Universal Mounting Base
• 1 ea. Reversable Featherboard Attachment
• 2 ea. MagJig 150's

Universal Base

Magswitch Universal Mounting Base is the centerpiece of the Magswitch Workholding System. Low profile design enables use on small surfaces including fences and small table tops.

Features:

• Centerpiece of the Magswitch Workholding System
• Low profile design
• Use on small surfaces including fences and small table tops

Includes:

• 1 ea. Magswitch Universal Mounting Base

Reversable Featherboard

The Magswitch Reversible Featherboard tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately – Note the Starter Kit includes the Reversible Featherboard). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Not limited by the miter slot. Featherboard is reversible for left and right hand feeds. Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks. Low profile design for use on your smallest tables and fences.

Features:

• Mounts to Universal Mounting Base and MagJigs
• Not limited by the miter slot.
• Reversible for left and right hand feeds.

Dual Roller Guide Attachment

The Magswitch Dual Roller Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence.
›See more product details

×

Dual Roller Guide Attachment

The Magswitch Dual Roller Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade. Includes micro adjustment for fine tuning to 90 degrees. Ideal for resawing on band saws, a second hand to support raised/long or tall panels on table saws, general infeed outfeed support on tables or fences. Low profile design for use on your smallest tables. Includes all requiered attachment hardware.

Features

• For use with the Magswitch Workholding System
• Dual set of roller bearing supports for firm yet smooth gliding of wood through a blade
• Includes micro adjustment for fine tuning to 90 degrees.
• Low profile design for use on your smallest tables.
• Includes all requiered attachment hardware.

Close

Features:

• For use with the Magswitch Workholding System
• Dual set of roller bearing supports for firm yet smooth gliding of wood through a blade
• Includes micro adjustment for fine tuning to 90 degrees.
• Low profile design for use on your smallest tables.
• Includes all requiered attachment hardware.

Resaw Guide Attachment

The Magswitch Resaw Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence.
›See more product details

×

Resaw Guide Attachment

The Magswitch Resaw Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Features roller bearing support for firm yet smooth gliding of wood through a blade. Angled Infeed/Outfeed to allow for blade drift adjustment. Includes all requiered attachment hardware and micro adjustment for fine tuning to 90 degrees. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support. Low profile design for use on your smallest tables.

Features

• For use with the Magswitch Workholding System
• Roller bearing support for firm yet smooth gliding of wood through a blade
• Angled Infeed/Outfeed to allow for blade drift adjustment.
• Includes all requiered attachment hardware and micro adjustment for fine tuning to 90 degrees.
• Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
• Low profile design for use on your smallest tables.

Close

Features:

• For use with the Magswitch Workholding System
• Roller bearing support for firm yet smooth gliding of wood through a blade
• Angled Infeed/Outfeed to allow for blade drift adjustment.
• Includes all requiered attachment hardware
• Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
• Low profile design for use on your smallest tables.

Professional Table Featherboard

Greater Holding Power And Safety, Anywhere You Need It. Three featherboards in one. This powerful Featherboard adds to your safety and quality of cut. Accepts the Magswitch Vertical Attachment with Risers for holding down as well as in to the fence. The Magswitch Pro Featherboard acts as the base of an adjustable stackable featherboard for tall pieces. Features two powerful 30mm Magswitches. Versatile — no miter slot limitation. Fast, accurate positioning. Cut wider material. Can be place beyond the miter slot. Provides powerful control. Easy on/off operation.

Features:

• Greater Holding Power And Safety
• Two powerful 30mm Magswitches
• Versatile — no miter slot limitation
• Fast, accurate positioning
• Cut wider material.
• Can be place beyond the miter slot.
• Provides powerful control.
• Easy on/off operation.

Universal Featherboard

Works On Both Sides Of The Blade, And Even The Fence. Low profile and double sided, this is the ultimate Featherboard from Magswitch. Works to improve your cutting results on either side of the blade. Also designed to work on\ any cast-iron fence to hold down your work so you don't have to. Great for small tables! Features two 20mm Magswitches.

Features:

• Works On Both Sides Of The Blade, And Even The Fence
• Low profile and double sided
• Also designed to work on\ any cast-iron fence to hold down your work so you don't have to
• Great for small tables! Features two 20mm Magswitches.
• Features two 20mm Magswitches.

Vertical Featherboard Attachment

The Vertical Featherboard Attachment tool is for use with the Magswitch Workholding System and The Pro Table Featherboard. In the Magswitch Workholding System, It mounts to the Reversible Featherboard Attachment, Universal Mounting Base and MagJigs (each sold separately).
›See more product details

×

Vertical Featherboard Attachment

The Vertical Featherboard Attachment tool is for use with the Magswitch Workholding System and The Pro Table Featherboard. In the Magswitch Workholding System, It mounts to the Reversible Featherboard Attachment, Universal Mounting Base and MagJigs (each sold separately – note, these are the tools that make up the Starter Kit). Adds a dimension of dual plane workholding. When attached to the Pro Table Featherboard, or Reversible Featherboard, the Vertical Featherboard Attachment can be mounted in a vertical position from the top for pressure down on the material at the same time the horizontal featherboard is holding the material against the fence. When set up in the stacked position using the risers, you get dual featherboard hold on the same horizontal plane – ideal for tall material. This tool helps protect against kickbacks on vertical and horizontal plane. Magswitch featherboards feature the core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Includes all requiered attachment hardware.

Features

• Adds a dimension of dual plane workholding.
• This tool helps protect against kickbacks on vertical and horizontal plane.
• Fast, strong set up anywhere on a steel table or cast Iron fence.
• Includes all requiered attachment hardware.

Includes:

• 1 ea. Vertical Featherboard
• 4 ea. Risers
• 2 ea. Attachment Arms
• Hardware needed for attaching

Close

Features:

• This tool helps protect against kickbacks on vertical and horizontal plane.
• Includes all requiered attachment hardware.

Includes:

• 1 ea. Vertical Featherboard
• 4 ea. Risers
• 2 ea. Attachment Arms
• Hardware needed for attaching

THIN ULTIMATE
Thin Stock Hold Down/Rip Guide

The Ultimate Thin Stock Hold Down/Rip Guide tool attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one!
›See more product details

×

THIN ULTIMATE Thin Stock Hold Down/Rip Guide

The Ultimate Thin Stock Hold Down/Rip Guide tool attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one! Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch. The Ultimate Thin Stock Rip Guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock. Ideal for thin stock hold down or infeed/outfeed on a table saw. Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts. This tool features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Low profile design for use on your smallest tables. Includes all required attachment hardware

Features

• Mounts to the Universal Mounting Base and MagJigs (each sold separately)
• Stepped side for most common sizes of 1/8, 1/4 and 3/8"
• The opposite side is sloped for odd sizes up to ¾ inch.
• Ideal for thin stock hold down or infeed/outfeed on a table saw.
• Low profile design for use on your smallest tables.
• Includes all required attachment hardware

Close

• Mounts to the Universal Mounting Base and MagJigs (each sold separately)
• Stepped side for common sizes
• The opposite side is sloped for odd sizes up to ¾ inch.
• Ideal for thin stock hold down or infeed/outfeed on a table saw.
• Low profile design.
• Includes all required attachment hardware

Universal Tracks

The Universal Track tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Unlike any other Track on the market today, the Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own Jigs, fixtures, stops, fences, zero clearance fences and more! Mounts to miter gauges and fences as well. Accepts all standard mounting hardware! One side accepts all standard T bolts and all ¼" hex. The other side accepts all standard T bolts, all 5/16" and Kreg® clamps. Includes micro adjustable brackets for fine tuning to 90 degrees. Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Comes in 18" and 36" lengths to accommodate small and large tables.