Shop Accessories
Tool Storage & Organization
|
||||||||||||
|
Complete your workshop with a SawStop Under Table Cabinet (UTC) designed to fit
perfectly beneath your SawStop cast-iron table saw. The 32” width fits a variety
of SawStop table saw configurations*. Five drawers mounted on heavy-duty,
3/4-extension soft-close drawer slides allow you to store blades, wrenches, and
accessories. Features:
|
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||||||||||
|
Access your lathe turning tools at a moments notice with the Turning Mate™ - the
Mobile Turning Tool Caddy. Rubber Tool Pod inserts allow you to store your tools
and allow you to see what tool to grab. You can also lay three tools down in the
three notches on the caddy tray for even quicker access to your tools. Five
swivel casters with brakes allow you to roll the tool caddy into any position
that is comfortable for you while turning. The Turning Mate can hold up to 24
Tool Pods. The caddy tray includes 12 soft rubber Tool Pods (6 for large tools
and 6 for small tools). |
|||||||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||
|
If you have ever reached for a tool on your lathe bed only to have it roll away or even worse, fall to the floor, then you know how frustrating it can be. With the Magnetic Base Tool Tray, your "roll away" tools are no more. The tray is secured with a strong magnetic base and it can be repositioned and adjusted quickly and easily. The Magnetic Base Tool Tray will not shimmy or vibrate loose. You can place up to 3 turning tools on the rack for easy access while turning. The tray will work with any lathe with a cast iron or steel lathe bed. Note: Tools / Lathe not included. |
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
Woodturner's Tool Roll |
||||||||||||
|
Store your lathe turning chisels, gouges, skews and more in this convenient Woodturner’s Tool Roll! Measuring 29” x 19-1/2” when laid out, the tool roll provides plenty of room for your lathe tools and more. The canvas roll has 14 pockets measuring 12” deep and the pockets vary in width for different size tools. Two nylon web straps with buckles secure the tool roll after it is rolled up. The tool roll also includes a handy carrying strap for easy portability. Note: Tools not included |
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
Lathe Turning Tool Storage Roll |
||||||||||||
|
Store your lathe turning chisels, gouges, skews and more in this convenient turning tool storage roll! Measuring approximately 32" x 24" when laid out, the tool roll provides plenty of room for your lathe tools. The canvas roll has 14 pockets measuring 13-1/2" deep and the pockets vary slightly in width for different size tools. Two nylon web straps with buckles secure the tool roll after it is rolled up. The tool roll also includes a handy carrying strap for easy transport of your tools. Note: Tools not included Features:
|
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||||||||||
|
Fulton Workshop Tools & Accessories Storage
Trays Small Dust Free Storage Tray
Small Storage Tray
Large Dust Free Storage Tray
|
|||||||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||
|
The Fulton Foam Router Bit Storage Tray is the perfect addition to your Festool
Systainer SYS1 and router bit organization. Designed to fit neatly into the
Festool Systainer, this foam router bit tray will hold a large assortment of
router bits, all the while protecting your bits from damage. We made this foam
router bit tray with the high density foam to provide you with a long term
router bit storage solution. Features:
Includes:
|
|||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
|
||||||||||||
|
We have all experienced the same issue. We start collecting router bits and
little by little we realize that we have nowhere to put them. To even further
complicate things, our router bits are both 1/4" and 1/2" shanks! We could
always make our own storage out of a piece of wood, but the problem with that is
the wood, wears and starts to slip after a while. The 1-5/16" thick foam Router
Bit Tray is a perfect storage solution for all those heavily used router bits.
Features:
|
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
Keep your router bits organized and protected with this simple foam rubber Router Bit Tray XL. A perfect storage solution for all those heavily used router bits. The foam Router Bit Tray XL stores and organizes up to 220 bits, with 110 holes each for 1/2" & 1/4" shanks (1/4" holes accept 8mm shanks as well.) The holes in the tray wrap snuggly around the bits to keep them from moving around. Stiff foam slab is 24" x 12" x 1-1/2" thick. Holes are on 1" centers. Features:
|
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
|
||||||||||||
Bar/Parallel Clamp
|
||||||||||||||||
|
Three Bar/Parallel clamp racks, each pre drilled 16" on center and each with
opposing modular tabs on both ends for the ultimate space saving clamp rack
system! Simply attach one rack to your standard 16" on center wall studs and
you're ready to align the other two clamp racks using the opposing modular tabs
as your guide. The racks fit together for a perfect fit on your wall, saving you
valuable space. Features:
Set Includes:
Note: Clamps not included |
|||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
F-Clamp
|
||||||||||||||||
|
Three F-Clamp racks, each pre drilled 16" on center and each with opposing
modular tabs on both ends for the ultimate space saving clamp rack system!
Simply attach one rack to your standard 16" on center wall studs and you're
ready to align the other two clamp racks using the opposing modular tabs as your
guide. The racks fit together for a perfect fit on your wall, saving you
valuable space. Features:
Set Includes:
Note: Clamps not included |
|||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
Pipe Clamp
|
||||||||||||||||
|
Three pipe clamp racks, each pre drilled 16" on center and each with opposing
modular tabs on both ends for the ultimate space saving clamp rack system!
Simply attach one rack to your standard 16" on center wall studs and you're
ready to align the other two clamp racks using the opposing modular tabs as your
guide. The racks fit together for a perfect fit on your wall, saving you
valuable space.
Features:
Set Includes:
Note: Clamps not included |
|||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
Assorted Modular Clamp Racks - 3 Pack
|
||||||||||||||||
|
Three assorted racks, each pre drilled 16" on center and each with opposing
modular tabs on both ends for the ultimate space saving clamp rack system!
Simply attach one rack to your standard 16" on center wall studs and you're
ready to align the other two clamp racks using the opposing modular tabs as your
guide. The racks fit together for a perfect fit on your wall, saving you
valuable space.
Features:
Set Includes:
Note: Clamps not included |
|||||||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||||||
|
||||||||||||||||
48" Quick Release Clamp Rack |
||||||||||||
|
Keep your Quick Release style clamps handy and ready to use at a moments notice. This rack is specifically designed to be used for safe storage of Quick Release style clamps. Simply mount the rack to your wall so that you have sufficient clearance off your shop floor. Use 1/4" lag bolt fasteners where the backside is accessible. When placing clamps on the rack, be sure the clamp is3901 fully engaged in the chosen slot. Rack is made from solid steel and measures approximately 48" in length. Mounting holes are pre-drilled on 16" centers. Mounting hardware is not included. Each slot accepts a bar width of approximately 5/16". Features:
Note: Quick Release clamps and pipe not included |
|||||||||||
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
||||||||||||
*Shipping Note: May require additional shipping charges due to being over sized for this item |
||||||||||||