Shop Accessories

Convex/Concave Cabinet Scraper

The ends of the Concave / Convex Cabinet Scraper are designed to be used on rounded or hollowed services. The edges for flats. Works like a regular card scraper but is a little harder to sharpen on the ends. Scraping produces a cleaner surface than sanding; it does not clog the pores of the wood with dust, and does not leave a fuzz of torn fibers, as even the finest abrasives will do.

Beveled Cabinet Scraper

The Beveled Cabinet Scraper is great for working in smaller areas such as the bottom of a box or a drawer bottom. The Beveled Scraper also works well when refinishing assembled furniture pieces. Scraping produces a cleaner surface than sanding; it does not clog the pores of the wood with dust, and does not leave a fuzz of torn fibers, as even the finest abrasives will do.

3 Piece Cabinet Scraper Set

Made of high carbon steel these scrapers will remove unwanted milling marks & are ideal for figured wood.

The 3pc set includes:

• 1 ea. Gooseneck Cabinet Scraper
• 1 ea. Flat Rectangular Cabinet Scraper
• 1 ea. Convex / Concave Cabinet Scraper

Each scraper is .031" thick.

4 Piece Cabinet Scraper Set

Made of high carbon steel these scrapers will remove unwanted milling marks & are ideal for figured wood.

4 Piece Set Includes:

• 1 ea. .4mm Cabinet Scraper
• 1 ea. .6mm Cabinet Scraper
• 1 ea. .8mm Cabinet Scraper
• 1 ea. 1.0mm Cabinet Scraper

6 Piece Cabinet Scraper Set

Remove tool marks and prepare wood surface for finishing better than sandpaper with this 6 piece Scraper set. Two of the scrapers have rounded edges to prevent accidental digging into your work.

Cabinet Scraper Set Includes:

• 1 ea. Fine Rectangle Cabinet Scraper
• 1 ea. Medium Rectangle Cabinet Scraper
• 1 ea. Heavy Rectangle Cabinet Scraper
• 1 ea. Concave / Convex Cabinet Scraper
• 1 ea. Gooseneck Cabinet Scraper
• 1 ea. Beveled Edge Cabinet Scraper

Scraper Burnisher Set
with 6 Piece Multi-Shaped Scrapers

Scraper burnishers are a staple in most every woodworkers shop. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result.

This burnisher is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The hardened, polished high carbon HRC 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give.
›See more product details

×

Scraper Burnisher Set

with 6 Piece Multi-Shaped Scrapers

Scraper burnishers are a staple in most every woodworkers shop. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device.

This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The hardened, polished high carbon HRC 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give. The hardwood handle gives you a comfortable firm grip and helps provide leverage when placing pressure on the scraper.

Hone, Scrape and Finish Projects By Hand

Using a burnisher to hone your scrapers is the best way to make the necessary bur on the scraper itself. Once the scraper is properly honed, it is ready to scrape the wood and help produce wonderful looking results that are hard to beat. Many woodworkers and craftsmen swear by their scrapers and its one of the most commonly used hand tools in the woodworking industry today as it was many years ago

Hone your scrapers

While using the hardened, polished high carbon HRC 62-64 steel rod on the burnisher, honing your scraper doesn't get much easier. With only a few strokes of the burnisher, you'll have one side of your scraper ready to start scraping the surface of your wood. While the term scraping sounds a little harsh, it simply means that your scraper will scrape or remove fine shavings of wood to help produce a finish like no other tool can really produce.

Scrape or Shave Your Wood...

Creating the perfect look and finish for your project is what we all want. Using a scraper can help achieve this by allowing you to remove finer amounts of material than with regular old sand paper. Scrapers also allow you to focus on specific areas of your wood so you can actually shape areas as needed with them.

Fine Finish Results

It bears repeating over and over again that card scrapers help produce some of the best finishing results possible when compared to other methods. Nothing removes just the right amount of material and produces smooth finishes quite like a scraper does.

Rectangle 1:
6" tall by 2.5" wide by .023" thick

Rectangle 2:
6" tall by 2.5" wide by .031" thick

Rectangle 3:
6" tall by 2.5" wide by .039" thick

Gooseneck Scraper:
4.6" tall by 2.93" wide by .033" thick with multiple curves and radii

Beveled Scraper:
4.5" tall by 2.5" wide by .033" thick

Curved Scraper:
6" tall by 2" wide by .033" thick with a 1.5" curve radius on top and bottom

Close

Set Includes:
• 3 Rectangle Scrapers
• 1 Curved Scraper
• 1 Beveled Scraper
• 1 Gooseneck Scraper
• 1 Burnisher
• 1 Burnishing Guide

7 Piece Mini Scraper Set

This scraper set is designed to be used for fine, detailed workpieces. Great for smoothing between lacquer applications on curved pieces and restoration work where small detail work is needed.

Scraper sizes:

• 1-1/8" x 1-3/4"
• 1-9/16" x 2-11/32"
• 1-1/16" x 1-27/32"
• 1-5/16" x 2-5/32"
• 2-1/16" x 1-3/4"
• 2-3/8" x 2-5/32"
• 4-5/16" x 1-5/16"

Concave Scrapers (2 pack)

The Fulton Concave Scraper set (2 Pack) lets you produce a smooth surface without using and spending extra money on sandpaper. These high quality tempered steel scrapers are approximately 80mm thick and are ready to be burnished. Our set includes 2 unique scrapers that are designed to scrape rounded edges like beads, roundovers, spindle legs and more.

The first scraper fits curved sizes of:

• 1/4"
• 3/8"
• 1/2"
• 5/8"
• 3/4"

The second scraper fits curved sizes of:

• 7/8"
• 1"
• 1-1/8"
• 1-1/4"
• 1-1/2".

Convex Scraper (2 Pack)

The Fulton Concave Scraper set (2 Pack) lets you produce a smooth surface without using and spending extra money on sandpaper. These high quality tempered steel scrapers are approximately 80mm thick and are ready to be burnished. Our set includes 2 unique scrapers that are designed to scrape recessed edges like flutes, raised panel edges and more.

The first scraper fits curved sizes of:

• 1/4"
• 3/8"
• 1/2"
• 5/8"
• 3/4"

The second scraper fits curved sizes of:

• 7/8"
• 1"
• 1-1/8"
• 1-1/4"
• 1-1/2".