Premium Router Tables

×

Router Table with Router Plate

Industry leading 1-3/8” thick MDF router table that is laminated on both the top and bottom. This helps prevent excessive moisture infiltration and unwanted warping. This extra thick table top also absorbs vibration and doesn’t chatter like standard, thinner router table tops tend to. The bright white laminate table top surface provides you with excellent stock visibility and is perfect for smoothly feeding your stock through the cutter.

Miter Mini Combination Track

The table top also features a Miter Mini combination track that runs the length of the table top. You can use a standard (3/4” x 3/8” bar) full size miter gauge in this track to make end-grain cuts and more. The mini track portion of the combination track is ideal for jigs and fixtures like feather boards to help keep your stock from “walking”. Two mini tracks run from back to front to mount multiple fence styles.

Premium 9 ¼” x 11 ¾” Phenolic Router Plate

A premium 9 ¼” x 11 ¾” phenolic router plate is included and features 5 easy to install insert locking rings (3/8", 1", 1-7/8", and 2-5/8" openings, as well as one guide bushing ring), a locking ring wrench, hold down screws and leveling screws. The plate is etched on the bottom with guide marks for aligning most any brand of router. Center guide markings (1/8" increments) are helpful for aligning a fence. The table top opening has magnets embedded around the perimeter to snap the router plate in place. The magnets align with the router plate set screws. Universal fit plate will work with most woodworking industry routers. Some drilling may be required depending on the router you own. Router plate center opening is 3-13/16". Router mounting instructions are included.

Mount the Router Table Top to any Stand as Needed

You can mount the router table top to any stand as needed. Typically the table top is mounted to a steel stand with wood screws. It can however be adapted to shop made wood stands if so desired. Mounting hardware is NOT included.

×

Router Table with Standard Fence Package

Includes Melamine Fence Sections and Aluminum Backer Fence

---

The Router Table with Standard Fence Package comes with two Melamine fence sections with mini tracks, an aluminum L bracket fence and a 2½” dust port.

Industry Leading 1-3/8” Thick MDF Router Table

Featuring an industry leading 1-3/8” thick MDF router table that is laminated on both the top and bottom. This helps prevent excessive moisture infiltration and unwanted warping. This extra thick table top also absorbs vibration and doesn’t chatter like standard, thinner router table tops tend to. The bright white laminate table top surface provides you with excellent stock visibility and is perfect for smoothly feeding your stock through the cutter. The table top also features a Miter Mini combination track that runs the length of the table top. You can use a standard (3/4” x 3/8” bar) full size miter gauge in this track to make end-grain cuts and more. The mini track portion of the combination track is ideal for jigs and fixtures like feather boards to help keep your stock from “walking”. Two mini tracks run from back to front to mount multiple fence styles.

Premium 9 ¼” x 11 ¾” Phenolic Router Plate

A premium 9 ¼” x 11 ¾” phenolic router plate is included and features 5 easy to install insert locking rings (3/8", 1", 1-7/8", and 2-5/8" openings, as well as one guide bushing ring), a locking ring wrench, hold down screws and leveling screws. The plate is etched on the bottom with guide marks for aligning most any brand of router. Center guide markings (1/8" increments) are helpful for aligning a fence. The table top opening has magnets embedded around the perimeter to snap the router plate in place. The magnets align with the router plate set screws. Universal fit plate will work with most woodworking industry routers. Some drilling may be required depending on the router you own. Router plate center opening is 3-13/16". Router mounting instructions are included.

Mount the Router Table Top to any Stand as Needed

You can mount the router table top to any stand as needed. Typically the table top is mounted to a steel stand with wood screws. It can however be adapted to shop made wood stands if so desired. Mounting hardware is NOT included.

×

Router Table with Deluxe Fence Package

Includes Laminated Fence Sections and Extruded Aluminum Backer Fence

---

The Router Table with Deluxe Fence Package comes with two adjustable fence sections, aluminum backer fence, mounting hardware, 2½” dust port and measuring tape.

Router Table with Deluxe Fence Package Includes:

• 1 ea. 24" x 32" Router table with plate $199.99
• 1 ea. 32" Pre-drilled aluminum backer fence $34.99
  
• 2 ea. 16" Melamine Fence Sections $44.99
• 1 ea. Router bit guard $6.99
• 1 ea. Router dust port assembly $8.99
• 1 ea. Adhesive Tape $6.99
• 5 ea. Level locking rings $19.99
• 2 ea. Long fence mounting knob $6.99
• 5 ea. Round knob & bolt $6.99

---

• If Purchased Separately $334.92

Industry Leading 1-3/8” Thick MDF Router Table

Featuring an industry leading 1-3/8” thick MDF router table that is laminated on both the top and bottom. This helps prevent excessive moisture infiltration and unwanted warping. This extra thick table top also absorbs vibration and doesn’t chatter like standard, thinner router table tops tend to. The bright white laminate table top surface provides you with excellent stock visibility and is perfect for smoothly feeding your stock through the cutter. The table top also features a Miter Mini combination track that runs the length of the table top. You can use a standard (3/4” x 3/8” bar) full size miter gauge in this track to make end-grain cuts and more. The mini track portion of the combination track is ideal for jigs and fixtures like feather boards to help keep your stock from “walking”. Two mini tracks run from back to front to mount multiple fence styles.

Premium 9 ¼” x 11 ¾” Phenolic Router Plate

A premium 9 ¼” x 11 ¾” phenolic router plate is included and features 5 easy to install insert locking rings (3/8", 1", 1-7/8", and 2-5/8" openings, as well as one guide bushing ring), a locking ring wrench, hold down screws and leveling screws. The plate is etched on the bottom with guide marks for aligning most any brand of router. Center guide markings (1/8" increments) are helpful for aligning a fence. The table top opening has magnets embedded around the perimeter to snap the router plate in place. The magnets align with the router plate set screws. Universal fit plate will work with most woodworking industry routers. Some drilling may be required depending on the router you own. Router plate center opening is 3-13/16". Router mounting instructions are included.

Mount the Router Table Top to any Stand as Needed

You can mount the router table top to any stand as needed. Typically the table top is mounted to a steel stand with wood screws. It can however be adapted to shop made wood stands if so desired. Mounting hardware is NOT included.

×

Router Table with Supreme Fence Package

Includes UHMW Fence Sections • Aluminum Backer Fence
and Extruded Aluminum Fence with Multiple Tracks

---

The Router Table with Supreme Fence Package includes two adjustable UHMW fence sections, 2½” dust port, aluminum L bracket fence and mounting hardware.

Router Table with Supreme Fence Package Includes:

• 1 ea. 24" x 32" Router table with plate $199.99
• 1 ea. 32" Pre-drilled aluminum backer fence $34.99
• 2 ea. 16" Uni-T Fence Sections $89.99
• 1 ea. Router bit guard $6.99
• 1 ea. Router dust port $3.99
• 1 pair Dust port mounting blocks $4.99
• 5 ea. Level locking rings $19.99
• 6 ea. 1/4" x 20 star knob & bolt $7.50

---

• If Purchased Separately $368.43

Industry Leading 1-3/8” Thick MDF Router Table

Featuring an industry leading 1-3/8” thick MDF router table that is laminated on both the top and bottom. This helps prevent excessive moisture infiltration and unwanted warping. This extra thick table top also absorbs vibration and doesn’t chatter like standard, thinner router table tops tend to. The bright white laminate table top surface provides you with excellent stock visibility and is perfect for smoothly feeding your stock through the cutter. The table top also features a Miter Mini combination track that runs the length of the table top. You can use a standard (3/4” x 3/8” bar) full size miter gauge in this track to make end-grain cuts and more. The mini track portion of the combination track is ideal for jigs and fixtures like feather boards to help keep your stock from “walking”. Two mini tracks run from back to front to mount multiple fence styles.

Premium 9 ¼” x 11 ¾” Phenolic Router Plate

A premium 9 ¼” x 11 ¾” phenolic router plate is included and features 5 easy to install insert locking rings (3/8", 1", 1-7/8", and 2-5/8" openings, as well as one guide bushing ring), a locking ring wrench, hold down screws and leveling screws. Router plate center opening is 3-13/16". The plate is etched on the bottom with guide marks for aligning most any brand of router. Center guide markings (1/8" increments) are helpful for aligning a fence. The table top opening has magnets embedded around the perimeter to snap the router plate in place. The magnets align with the router plate set screws. Universal fit plate will work with most woodworking industry routers. Some drilling may be required depending on the router you own. Router mounting instructions are included.

Mount the Router Table Top to any Stand as Needed

You can mount the router table top to any stand as needed. Typically the table top is mounted to a steel stand with wood screws. It can however be adapted to shop made wood stands if so desired. Mounting hardware is NOT included.