×

5 Piece Safety Push Block And Safety Stick Kit

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Keep your fingers out of harms way...

This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Orange for Safety

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

Why pay more?

• Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
• The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

Keeping Your Distance Is Key

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

Durable and Built to Last!

Each device in this set is made from a super durable polymer plastic to stand up to everyday use. They are almost indestructible! Each of the blocks with foam pads are designed to grip the material. If they become built up with dust and debris, clean them with warm soapy water and let them dry for at least 24 hours before using them again.

×

4 Piece Woodworking Safety Kit

Keeping your fingers and hands away from sharp cutters and blades in your workshop should be priority number one for any woodworker. Thats why we have created this one of a kind safety kit!



This 4 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow, magnetic push stick, to the versatile feather board, this kit has all the bases covered in regards to many different woodworking applications.

Works on Router Tables, Table Saws and Band Saws!

We have equipped this feather board with two different sets of mounting hardware. Depending on your needs for the feather board, you can either mount it vertically or horizontally. It comes with two expandable metal miter bars so the feather board can be secured to a standard 3/4" wide by 3/8" deep miter slots like those found on most woodworking machinery. The unit also comes with t-bolts for mounting or securing the feather board to 1/4" t-track slots like those found on some router tabletops and router table fences. These mounting options make this feather board super versatile and a must for any workshop!

Whats in the Box?

This kit includes:

• 1 each Deluxe Multi-Mount Feather Board with Mounting Hardware
• 1 each Magnetic Handle Push Stick
• 1 each Straight Handle Push Block
• 1 each Angled Handle Push Block
• 1 each Basic Instruction Sheet

×

Safety Push Block 2 Pack

Ideal for router tables, band saws, jointers and shapers. Made from heavy duty material to stand up to the everyday workshop enviornment. Push blocks are designed to be one of your essential safety devices to help provide protection and prevent your fingers from getting too close to cutters or blades on a router table, band saw, shaper or a jointer. Push blocks work well in multiple situations throughout your woodworking projects and are intended to be used any time your fingers are close to being in harms way.

Control stock while keeping your fingers away from danger...

Push blocks are an essential part of workshop safety. Whenever we need to push stock through on router tables, band saws, jointers, shapers and in some cases table saws, it is always a good idea to keep our fingers away from the blade or cutter. This push block has been designed with exactly that in mind. The block is made from a heavy polyethylene plastic that absorbs any sort of shock. It won't crack or shatter if dropped and it won't crack or shatter if it comes into contact with a blade or cutter. This makes the push block the perfect safety accessory for any work shop environment.

Stands up to the everyday workshop environment!

The push block is made from a heavy duty, injected molded, polyethylene plastic material. This material is very thick or dense and provides the user with a substantial feel in there hand when using it. This along with the angled, molded handle grip gives you more leverage than straight vertical style push blocks.

×

Gator Grip™ Push Block 2 Pack

Gator Grip push blocks have a uniquely designed podular patterned rubber pad that offers superior gripping power over your standard foam base push block. The podular pattern along with the firm but receptive rubber material grips your stock better than ever before and makes feeding your stock through multiple workshop machine cutter types much easier. The unique Gator Grip podular design also helps keep dust and debris in the surface voids to help maintain excellent traction.

Throw Those Old Foam Lined Push Blocks Away!

While old foam push blocks served a purpose over the years, their time has finally come. Introducing the Gator Grip Push Block! Lined with a blue, podular patterned rubber pad, the Gator Grip Push Blocks redefine gripping power! The pad design allows for the dust and debris to fall between the pods which allows the push blocks to retain traction while feeding your stock.

Not Even Fair to Compare...

Foam push blocks have always kind of worked. Sure, with a lot of pressure you can get them to grip, but when you need them to grip it can be a crap shoot especially if the foam is old and dirty. The Gator Grip Push Blocks have superior gripping power in comparison and they last much longer and won't dry rot like most foam push blocks do. The blue pads are also very easy to clean with warm running water and a dry cloth. Always let the pad completely dry before using.

Let the blocks do the heavy push throughs...

One of the most common uses for push blocks is to help feed stock through a jointer. Heck, many jointer machine manufacturers send old school style push blocks with the jointer itself. Two Gator Grip Push Blocks provide you with plenty of gripping power to push through your jointer cutters. You can even daisy chain longer stock pieces with confidence.

Excellent Traction Means Control

When doing freehand router work, it is vitally important to control your stock and even more important to keep your fingers a safe distance away from the cutter itself. The Gator Grip Push Blocks achieve this by allowing you to control the stock piece with two Gator Grip Push Blocks which keep your hands and fingers away from the router bit at all times.

Resaw on Your Band Saw

Short or long pieces can be re-sawed on your band saw using one or even two Gator Grip Push Blocks. The gripping power allows you to apply even and controlled pressure on your stock while in the vertical position.

Easy Maintenance

With a little warm water and a cloth, you can quickly and easily clean off the dust and debris from the Gator Grip pads.

×

Small Push Block

This small push block is made with durable hard plastic handle & base. With it's light wieght and angled handle it makes this push block fit comfortably in your hand while pushing your stock thru your tablesaw or router table with ease. The small Push Block works great with tablesaws, router tables and joiners, but can be used on many of your typical work shop machines as well. Natural rubber friction pads grip the work peace letting you work with confidence, keeping this block between your fingers and the cutting tool. Constructed of day-glo orange high-impact molded plastic. Pad size 3" x 6".

Features

• Constructed of day-glo orange high-impact molded plastic
• Pad size is 3" x 6"
• Light weight
• Angled handle
• Fit comfortably in your hand
• Natural rubber friction pads

×

Power Push Block

Our brand new push block gives you better control when pushing smaller stock through your router on a table top surface. Made of a composite rubber the pad on the push block is designed grip your stock and provide excellent control while pushing your stock through the router. The Power Push Block also has an adjustable platform so you can position the block on top of wider stock pieces. An easy grip handle is completely adjustable side to side for better leverage on smaller pieces. The adjustable arm and the anti-kick back stop firmly hold your stock in place during your cutting process.

Adjustable Platform

The Power Push Block also has an adjustable platform so you can position the block on top of wider stock pieces. An easy grip handle is completely adjustable side to side for better leverage on smaller pieces.

Excellent Grip and Control

Made of a composite rubber the pad on the push block is designed grip your stock and provide excellent control while pushing your stock through the router.

Anti-Kick Back Stop

The adjustable arm and the anti-kick back stop firmly hold your stock in place during your cutting process.

×

GRR-RIPPER+

The Grr-ripper+™ 3D Pushblock is engineered to give you the most accurate cuts possible while protecting your hands at all times. No other pushblock offers this level of precision, control, and safety. Make difficult cuts with ease and prevent kickback like never before.

Three Directions of Force

Three directions of force provide essential stability for superior precision, safety, and control.

• Downward pressure stabilizes work piece on a flat surface.
• Inward pressure against the fence virtually eliminates kickback.
• Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.

Virtually Eliminates Kickback on Table Saws

The Grr-ripper+™ provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.

Router Tables

The Grr-ripper provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

Table Saws

The Grr-ripper was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the Grr-ripper can cut stock down to ¼” x ¼”. Because it provides three directions of control, your cuts will be cleaner and more precise.

Jointers

The Grr-ripper’s proprietary Green Grr-rip material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. The Grr-ripper makes proper face-jointing technique easy and safe.

Band Saws

The Grr-ripper's legs and main body maintain a constant 90-degree angle. It can be used on its side, which is ideal for resawing on band saws. The Grr-ripper glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

×

Grr-ripper2 Go™

No assembly needed, easy setup and the perfect size to grab it and go to work safely! The Grr-ripper2 Go comes fully assembled and with a color coded sticker to place on your fence scale for quick cut width reference. Using the installed color coded sticker on your fence scale, simply match the color bar up with the color coded markings on the Grr-ripper2-Go to ensure your passing the blade through the correct tunnel.

Avoid Dangerous Kickbacks

Kickback occurs when wood move in a way that makes the saw blade catch it and “kick” it back at you causing a very dangerous situation. The Grr-ripper2-Go keeps your stock piece straight and stable through the entire cutting process so the saw blade doesn’t catch the stock and you, your fingers, yourself and anyone in the shop stays safer.

Use the Grr-ripper2-Go Virtually Anywhere In Your Shop

Not just for your table saw, the Grr-ripper2-Go can be used virtually anywhere in your shop or on the jobsite. Keeping your fingers safely away from, router bits, band saw blades, jointer knives/cutters and a whole lot more!

Extreme Gripping Power

Extreme gripping power easily holds, controls and stabilizes your workpiece better than any other “safety” device available. This not only helps make the cutting process easier, it also prevents bodily injury.

Superior Protection for Your Safety

We over engineer for your safety! Cut small parts safely and accurately with the powerful gripping legs. The legs minimum cutting width of just 5/16” (8mm) is perfect for making precise, narrow cuts for your next project. With no bare-hand feeding and the ability to keep your stock up and against the fence through the entire cutting process, the Grr-ripper2-Go provides you with superior protection.

No assembly. Easy setup.

The legs of the Grr-Ripper 2 GO are staggered so any rip cut from 5/16” (8mm) to 2” (50mm) up can be made with the blade passing safely underneath. The Grr-Ripper 2 GO comes with our patented Color Coded Index to help you set your cuts properly. Apply the provided see-through Color Code Index sticker to your saw’s rip fence scale. Whenever you set the rip fence, the color showing under the cursor, shows how to position the 2 GO against the fence. Correct set ups are a breeze!

Two is Better Than One

Using another Grr-ripper2 Go allows you to feed long stock without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

×

Grr-Ripper® 100

Basic Model GR-100

3-Directional Force for total control of the workpiece Moving-Blade-Guard Hand protection Precise 1/4" thin rips Virtually eliminates kickback Work with small stock safely

Grr-Ripper® 100 Basic Model GR-100

The GRR-Ripper is not some simple push block. The GRR-Ripper is a unique precision guidance and stock control system designed to feed your wood through your table saw blade with far more safety and accuracy than could ever be possible with bare hands and conventional push blocks.

×

Grr-Ripper® 200

Advanced Model GR-200

GRR-RIPPER Advanced 3D Pushblock is the ultimate in safety, precision, and control. A must-have for any table saw user. Essential for protection against injury, virtually eliminating kickback, and controlling your work piece large and small accurately. Includes 2 additional accessories: the Adjustable Spacer and the Stabilizing Plate.

Grr-Ripper® 200 Advanced Model GR-200

Guide and rip along the rip fence using the powerful gripping non-slip surface to control the stock through the cutters. Rips down to 1/4" standard without readjusting the fence. The Adjustable Center Leg accommodates for a variety of sizes and widths. Built-in Balance Support Stabilizes for narrow and small work pieces on the table saw and router table for safer, straighter, and cleaner cuts. The Handle is adjustable for ergonomic comfort.

×

GRR-Ripper® Double Pack

Pro Model # GR-420

The Gripper is a revolutionary, universal pushing jig for all table saw, router table and jointer users. This is the first tool that grips and holds both sides of work piece during a ripping operation. Unlike a push stick or push block, the Gripper maintains balanced pressure on a work piece as it passes through and beyond the blade. Maintains a parallel, forward direction with the blade while keeping pressure against your rip fence to prevent burning. Eliminates the need to feed stock with your bare hands providing 100% protection. You can cut strips as thin as 1/4" without any special setup so there is no need to throw away those small scrap pieces. The unit can be offset to accommodate small, irregular shaped, pieces on the router table.

GRR-Ripper® Double Pack Pro Model # GR-420

GRR-RIPPER Advanced 3D Pushblock is the ultimate in safety, precision, and control. A must-have for any table saw user. Essential for protection against injury, virtually eliminating kickback, and controlling your work piece large and small accurately.

Guide and rip along the rip fence using the powerful gripping non-slip surface to control the stock through the cutters. Rips down to 1/4" standard without readjusting the fence. The Adjustable Center Leg accommodates for a variety of sizes and widths. Built-in Balance Support Stabilizes for narrow and small work pieces on the table saw and router table for safer, straighter, and cleaner cuts. The Handle is adjustable for ergonomic comfort.

×

Gripper Upgrade Kit

Upgrade your GRR-RIPPER to GRR-RIPPER Advanced! Get Unmatched Precision, Safety and Control for Woodworker Projects on your Table Saw; Expand the versatility of your favorite table saw and workshop safety tool; Increase gripping capacity by 54%; Increase stabilizing capacity by 250%; Make intricate detailed cuts for your most precise projects; Work Smarter with the GRR-RIPPER Upgrade Kit and upgrade your GRR-RIPPER. A must-have for any table saw user.

Gripper Upgrade Kit

Upgrade Kit for a Powerful Fully Adjustable Push block with Durable Extreme Grip; The GRR-RIPPER Upgrade Kit includes (1) Stabilizing Plate, (1) Adjustable Spacer and mounting hardware; The Stabilizing Plate provides 250% more stabilizing surface area. Like a feather board, it keeps wood locked against the fence for a smooth cut; virtually eliminating binding; The adjustable Spacer gives you 54% more gripping area for controlling larger material. Fully adjustable. Use it as a router table guide for bullnose routing and eliminating snipe from your full-profile cuts. Fits all GRR-RIPPER GR-100 models to upgrade to GRR-RIPPER GR-200.

Work small parts safely.

Stabilizing Plate keeps workpiece parallel to the fence for a safer, smoother cut.

×

Grr-Ripper® Gravity Heel Kit

Upgrade your GRR-RIPPER to GRR-RIPPER Advanced! Get Unmatched Precision, Safety and Control for Woodworker Projects on your Table Saw; Expand the versatility of your favorite table saw and workshop safety tool; Increase gripping capacity by 54%; Increase stabilizing capacity by 250%; Make intricate detailed cuts for your most precise projects; Work Smarter with the GRR-RIPPER Upgrade Kit and upgrade your GRR-RIPPER. A must-have for any table saw user.

Upgrade Your GRR-RIPPER 3D Pushblock System

The perfect upgrade accessory for your GRR-RIPPER 3D Pushblock system. The unique design provides extra leverage to help push through the cut and prevent blowout.

Finish Strong

Provides extra leverage to help push through the cut and prevent blow out. For those dense materials you need a little extra push.

There when you need it

Hooks the tail-end of your workpiece by automatically dropping down. Can be set to varying heights depending on the thickness of your material.

Out of the way when you don't

Automatically retracts mid-board when you need full contact and traction from the GRR-RIPPER. Perfect for when feeding long-material hand-over-hand.

Perfect for face jointing on jointers

Face joint with proper technique by using the Gravity Heel to push the material forward rather than pushing down which could cause a bump in your material.

Use vertically on bandsaws

Keep your fingers out of range and get the contact and leverage you need to finish your resaw cut. Applying consistent pressure along the cut reduces bandsaw drift which gives you a straighter cut.

Stay safe when coping on router tables

The Gravity Heel makes the perfect backer to your cut to reduce blow out or tear out on your material for a clean finish. You can also use the Gravity Heel as a template to quickly reset the height of your bit.

×

MJ Deflector/Connector

The MJ Deflector/Connector (D/C) is designed to enhance the user experience of the GRR-Ripper® System. The D/C can be used for chip/dust deflection. It can also serve as a connecting bridge between two GRR-Rippers®, where it allows for multiple configurations when used on the table saw, router table, and shaper. When the D/C is installed behind a GRR-Ripper®, it also serves as a blade cover when exiting the cut on the table saw.

Chip/Dust Deflection

The MJ Deflector/Connector (D/C) can be used for chip/dust deflection.

Multiple Configurations

It can also serve as a connecting bridge between two GRR-Rippers®, where it allows for multiple configurations when used on the table saw, router table, and shaper.

×

Grr-Ripper® 1/8" Leg

Cutting small pieces on the table saw just got safer, faster and much easier. Make consistent and precise accurate 1/8" cuts safely and every time with the GRR-Ripper® without moving the fence. Just remove the the exiting 1/4" leg from the Grr-Ripper® and replace it with the 1/8" leg. Now you can cut those 1/8" strips on the inside of the blade and not have to stop stop to reset the tablesaw fence in those 1/8" increments each cut.

GRR-RIPPER 1/8" Leg Accessory

Make quality rips as thin as an 1/8'' with the GRR-RIPPER 1/8'' Leg Accessory. Perfect for ripping wood on a table saw to edge bend or inlay. Create your own veneer strips or decorative details to make your next project a masterpiece. Easily attaches to all existing GRR-RIPPER Models. Mounting hardware included. Attaches directly to the main body or side leg of the GRR-RIPPER. Powerful Green GRR-RIP lines the bottom surface for secure traction and hold over the workpiece. Guides, rips, and feeds the workpiece without readjusting the fence for consistent quality and dimension. Before the GRR-RIPPER 1/8" Leg, thin rip cuts were extremely dangerous when manually feeding. Traditional push sticks are dangerous and unstable. Now, repeatable, clean, safe, and controlled 1/8” thin rip cuts are a reality for woodworkers worldwide. Make rip cuts as thin as 1/8" without breaking a sweat. The GRR-RIPPER's most popular accessory. Work Safer. Work Smarter.