Drilling / Boring

Kreg Quick Flip

Create a variety of strong and simple joints using Kreg Screws and the Quick-Flip. Drill a pilot hole and counterbore with one side, then flip the insert and drive a Kreg Screw with the included #2 square-drive bit on the other side. The Quick-Flip chucks into any drill and accepts any 1⁄4" driver bit.

Features:

• Create a variety of strong and simple joints
• Drill a pilot hole and counterbore with one side, then flip the insert and drive a Kreg Screw on the other side
• Includes #2 square-drive bit
• Chucks into any drill
• Accepts any 1⁄4" driver bit

Includes:

• 1 Quick-Flip drill/driver bit

Micro-Pocket™ Drill Bit

This unique bit works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole (15/16"-long). Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2" (12mm) thick material and narrow stock, down to 1" (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.
›See more product details

×

Micro-Pocket™ Drill Bit

This unique bit works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole (15/16"-long). Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2" (12mm) thick material and narrow stock, down to 1" (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.

Features

• Works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole
• For use with the Kreg Jig® K3, K4, K4MS, and the Foreman Pocket-Hole Machine (Item# DB210)
• Works great in almost every application where you'd use standard Kreg® pocket holes
• Especially good for 1/2" (12mm) thick material and narrow stock, down to 1" (25mm) wide
• Faster, easier drill strokes because the bit removes less material
• 19/64" (7mm) diameter, 0.170" (4mm) diameter pilot tip
• One-piece, industrial high-speed steel

For Use With:
Compatible with the Kreg Jig® K3, K4, K4MS, and K5, when being used with the Micro-Pocket™ Drill Guide. Also compatible with the Foreman Pocket-Hole Machine

Close

For Use With:
Compatible with the Kreg Jig® K3, K4, K4MS, and K5, when being used with the Micro-Pocket™ Drill Guide. Also compatible with the Foreman Pocket-Hole Machine

Kreg XL Drill Bit

Make bit setup simple. The Kreg XL Drill Bit features our easy-set design with etched material-thickness markings on the bit and a sight-window stop collar. Works with the Pocket-Hole Jig XL, and as a replacement for the Kreg Jig HD Drill Bit.

Features:

• Easy-set design
• Etched material-thickness markings on the bit
• Sight-window stop collar
• Works with the Pocket-Hole Jig XL

Includes:

• Easy-Set Micro-Pocket™ Drill Bit and Stop Collar
• Hex Wrench

Easy-Set Drill Bit
with Stop Collar & Gauge/Hex Wrench

Add a second bit to your keg 300-series pocket-hole jig, or update any Kreg jig to make working with 1/2", 3/4", and 1 1/2" Materials even easier. The keg Easy-Set pocket-hole drill bit with step collar and gauge/wrench is the same stepped bit that comes with 300-series Kreg pocket-hole jigs.
›See more product details

×

Easy-Set Drill Bit with Stop Collar & Gauge/Hex Wrench

Add a second bit to your keg 300-series pocket-hole jig, or update any Keg jig to make working with 1/2", 3/4", and 1 1/2" Materials even easier. The keg Easy-Set pocket-hole drill bit with step collar and gauge/wrench is the same stepped bit that comes with 300-series Keg pocket-hole jigs.

Easy-Set Drill Bit with Stop Collar & Gauge/Hex Wrench Features

• Stepped drill bit, stop Collar, and material-thickness gauge/wrench for Kreg pocket-hole jigs
• Drill bit features Easy-Set etched markings for 1/2", 3/4", 1 1/2" Materials
• Stop Collar window aligns with etched markings on drill bit for easy setup
• Thickness gauge measures material thickness (1/2", 3/4", 1 1/2"), and has built-in hex wrench
• Direct replacement for items included with Keg pocket-hole Jig 320, 310

Determine Your Material Thickness

Material thickness gauge allows you to easily determine material thickness (1/2", 3/4", 1 1/2")

Engraved Markings for 1/2", 3/4", 1 1/2"

This bit features engraved markings for 1/2", 3/4", 1 1/2", along with the matching Easy-Set stop Collar. Stop Collar window aligns with etched markings on drill bit for easy setup

1/4" Hex-shank

A 1/4" Hex-shank fits all standard quick-change chucks. Compatible with all Keg pocket-hole jigs.

Close

Features:

• Works with materials from 1/2" to 1-1/2" thick
• Drill bit features easy-set etched markings for 1/2", 3/4", 1-1/2" materials
• Stop collar window aligns with etched markings on drill bit for easy setup
• Thickness Gauge measures material thickness, has built-in hex wrench
• Direct replacement for items included with Kreg® Pocket-Hole Jig 320, 310
• Also works with K5, K4, K3, R3, Mini, and Foreman

Includes:

• 1 ea. Easy-Set Drill Bit
• 1 ea. Easy-Set Stop Collar
• 1 ea. Material Thickness Gauge/Hex Wrench

Easy-Set Pocket-Hole Drill Bit

The Easy-Set Pocket-Hole Drill Bit is the same 3/8" diameter stepped bit that comes with Kreg® 300-Series Pocket-Hole Jigs. If you have a worn bit, or if you want to add another bit to your pocket-hole tool collection, this is the perfect choice.
›See more product details

×

Easy-Set Pocket-Hole Drill Bit

The Easy-Set Pocket-Hole Drill Bit is the same 3/8" diameter stepped bit that comes with Kreg® 300-Series Pocket-Hole Jigs. If you have a worn bit, or if you want to add another bit to your pocket-hole tool collection, this is the perfect choice.

This bit works with materials from 1/2" to 1-1/2" thick, and features engraved markings for 1/2", 3/4", and 1-1/2" materials to match up with the Easy-Set Stop Collar. A 1/4" hex shank fits standard quick-change chucks. Compatible with all Kreg Pocket-Hole Jigs.

Easy-Set Pocket-Hole Drill Bit Features

• Stepped drill bit for creating pocket holes using a Kreg® Pocket-Hole Jig
• Works with materials from 1/2" to 1-1/2" thick
• Easy-set etched markings for 1/2", 3/4", 1-1/2" materials
• Direct replacement for drill bit included with Kreg® Pocket-Hole Jig 320, 310
• Also works with K5, K4, K3, R3, Mini, and Foreman
• 1/4" hex shank works with quick-change drill chucks

Close

Features:

• Works with materials from 1/2" to 1-1/2" thick
• Easy-set etched markings for 1/2", 3/4", 1-1/2" materials
• Also works with K5, K4, K3, R3, Mini, and Foreman
• 1/4" hex shank works with quick-change drill chucks

Includes:

• 1 ea. Easy-Set Drill Bit

Easy-Set Stop Collar
& Material Gauge/Hex Wrench Kit

This kit includes the same Easy-Set stop Collar and material thickness gauge/hex wrench that come with Kreg 300-series pocket-hole jigs.
›See more product details

×

Easy-Set Stop Colla & Material Gauge/Hex Wrench Kit

This kit includes the same Easy-Set stop Collar and material thickness gauge/hex wrench that come with Kreg 300-series pocket-hole jigs. The collar features a window that aligns with the engraved markings on the kreg Easy-Set pocket-hole drill bit to make setting the bit at the correct depth easy for 1/2", 3/4", and 1 1/2" Materials. The material thickness gauge allows you to easily determine material thickness (1/2", 3/4", 1 1/2"), and has a built-in hex wrench for tightening the stop Collar. Collar Also fits all other standard (3/8"-diameter) Kreg pocket-hole drill bits.

Easy-Set Stop Colla & Material Gauge/Hex Wrench Kit Features

• Stop Collar and material-thickness gauge/wrench for Keg pocket-hole jigs
• Stop Collar window aligns with etched markings on drill bit for easy setup
• Thickness gauge measures material thickness (1/2", 3/4", 1 1/2"), and has built-in hex wrench
• Direct replacement for items included with Keg pocket-hole Jig 320, 310
• Also works with K5, K4, K3, R3, Mini, and Foreman

Includes

• 1 ea. Easy-Set Drill Bit

Close

Features:

• Stop Collar window aligns with etched markings on drill bit for easy setup
• Thickness gauge measures material thickness (1/2", 3/4", 1 1/2"), and has built-in hex wrench
• Direct replacement for items included with Keg pocket-hole Jig 320, 310
• Also works with K5, K4, K3, R3, Mini, and Foreman

Includes:

• 1 ea. Easy-Set Drill Bit

90° Pocket Hole Bit Kit

This 90° Pocket Hole drill bit is made from high speed steel. The bit is designed to virtually eliminate clogging and the drills smother and faster than standard drill bits. It measures 3/8" in diameter so it can be used in most pockethole jig units. This kit also includes a handy depth stop for accrate depth drilling and a hex key wrench for adjusting the depth stop.

Features:

• Made from high speed steel
• Designed to virtually eliminate clogging
• Drills smother and faster than standard drill bits
• 3/8" in diameter so it can be used in most pockethole jig units
• Includes a depth stop and a hex key wrench

Kreg Jig® HD (Heavy-Duty) Drill Bit

The Kreg Jig® HD (Heavy-Duty) Drill Bit was made specifically for Kreg Joinery™ and exclusive use with the Kreg Jig® HD. It features a 1/4" (6mm) hex shank, Kreg® Quick-Change Chuck compatibility, and drills a 1/2" (12mm) diameter pocket hole.

For exclusive use with: Kreg Jig® HD.

Features:

• For use with the Kreg Jig® HD manual pocket-hole jig
• Compatible with Kreg Quick-Change Chuck and standard chucks
• Drills 1/2" (12mm) diameter pocket holes
• One-piece, hardened-steel design

Depth Collar & Allen Wrench for Stepped Drill Bit

This rugged depth collar and Allen wrench works with any 3/8" (9mm) diameter stepped Kreg® drill bit. It was specifically designed for controlling the depth of your drill bit when drilling standard pocket holes with any manual Kreg Jig®.

Features:

• Rugged depth collar and Allen wrench
• Works with any 3/8" (9mm) diameter stepped Kreg® drill bit
• Designed to control depth of the drill bit
• For use with any manual Kreg Jig®

7 Piece Split Ring Depth Stop Set

Black oxide steel stop collars use hex screws (wrenches included) that tighten the collar around the bit, rather than locking into the flutes, so they are less likely to loosen or damage the flutes. Seven-piece set has collars to fit drill bits.

Features:

• Black oxide steel
• Seven-piece set
• Less likely to loosen or damage flutes

Set Includes:

• 1 ea. 1/8” Depth Stop
• 1 ea. 3/16” Depth Stop
• 1 ea. 1/4” Depth Stop
• 1 ea. 5/16” Depth Stop
• 1 ea. 3/8” Depth Stop
• 1 ea. 7/16” Depth Stop
• 1 ea. 1/2” Depth Stop
• Hex key

3" & 6" #2 Square Driver Combo

All Kreg® drivers features a solid one-piece construction, magnetic tip, and Kreg® Quick-Change Chuck compatibility for fast and easy bit changes. This combo includes one 3" (76mm) square driver and one 6" (152mm) square driver. The 6" version offers the most flexibility and ease-of-use for your projects. The 3" version is handy when you’re working in tight spots where the 6" driver can’t reach.

• Solid one-piece construction
• Quick-Change compatible Magnetic tip

Item #1489 Includes:

• 1 ea. 3" (76mm) #2 square driver
• 1 ea. 6" (152mm) #2 square driver