Tablesaws & Accessories

10" Industrial Ultimate Cut-Off Blade

This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• No Stabilizers needed
• Unique Side Grind polishes the material to produce a superior finish
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm

Materials: Wood, Plywood, Chip Board & Laminates

10" Industrial Thin Kerf Ultimate Cut-Off Blade

This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• No Stabilizers needed
• Unique Side Grind polishes the material to produce a superior finish
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. Depth of cut (1/4" min to 1-5/8" max)

Machine Use:Slide Miter Saw, Table Saw, Radial Arm

Materials: Plywood and Chip Board (1" Max Thickness), Wood & Laminates

12" Industrial Ultimate Cut-Off Blade

This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• No Stabilizers needed
• Unique Side Grind polishes the material to produce a superior finish
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. Depth of cut (1/4" min to 1-5/8" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm

Materials: Plywood and Chip Board (1" Max Thickness), Wood & Laminates

12" Thin Kerf Industrial Ultimate Cut-Off Blade

This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• No Stabilizers needed
• Unique Side Grind polishes the material to produce a superior finish
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. Depth of cut (1/4" min to 1-5/8" max)

Machine Use: Slide Miter Saw,Table Saw,Radial Arm Saw,Portable Table Saw

Materials: Wood, Plywood, Chip Board & Laminates

8-1/2" Industrial Thin Kerf Sliding Compound Miter Saw Blade

This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you won’t need stabilizers!

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• No Stabilizers needed
• Unique Side Grind polishes the material to produce a superior finish
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. Depth of cut (1/4" min to 1-5/8" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm

Materials: Plywood and Chip Board (1" Max Thickness), Wood & Laminates

10" Industrial Thin Kerf Sliding Compound Miter Saw Blade

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• Negative Hook Angles minimizes climbing for better control
• Thin Kerf requires less power and allows for faster feed rate
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Fine Finish Blades For Sliding Miter & Radial Arm Saws. Depth of cut (1/2" min to 2-3/4" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm Saw, Portable Table Saw

Materials: Wood, Plywood, Chip Board & Laminates

12" Industrial Thin Kerf Sliding Compound Miter Saw Blade

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• Negative Hook Angles minimizes climbing for better control
• Thin Kerf requires less power and allows for faster feed rate
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Fine Finish Blades For Sliding Miter & Radial Arm Saws. Depth of cut (1/2" min to 2-3/4" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm Saw, Portable Table Saw

Materials: Wood, Plywood, Chip Board & Laminates

10" Industrial Thin Kerf Crosscut Blade

This Perma-SHIELD™ coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

• Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
• Positive Hook Angles produce a smoother cut and allow for a faster feed rate
• Thin Kerf reduces waste and feeds easier
• Perma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.

Ideal For: Crosscutting Blades For Fine Finish With Underpowered Saws. Depth of cut (1/2" min to 2-3/4" max)

Machine Use: Slide Miter Saw, Table Saw, Radial Arm Saw, Portable Table Saw

Materials: Wood, Plywood, Chip Board & Laminates

10" Industrial CabinetMaker's Crosscut Blade

Freud’s new Cabinetmaker’s crosscut blade includes a 38 degree Hi-ATB (Alternate Top Bevel) tooth grind that delivers excellent crosscuts in double-sided veneer plywood and double-sided melamine. With its newly added Perma-SHIELD® non-stick coating and tooth geometry, this blade is designed primarily for heavy use in a cabinetmaker’s shop. The LU73R series is ideal for cutting in hardwood, softwood, plywood, and chipboard in thicknesses from 1/2" to 2- 3/4".

• New 38 degree Hi-ATB for excellent crosscuts in double-sided veneer plywood and double-sided melamine
• Premium crosscutting blend of TiCo™ Hi-Density Carbide for maximum performance
• Perma-SHIELD® non-stick coating for less heat, gumming and corrosion
• Precision tensioning with computer controlled equipment for the blade to stay flat and true
• Positive hook angles for fast cutting and easy feed

Ideal For: Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker. Depth of cut (1/2" min to 2-3/4" max)

Machine Use: Slide Miter Saw,Table Saw,Radial Arm Saw,Portable Table Saw

Materials: Wood, Plywood, Chip Board & Laminates