New 2022 Kreg Products

Panel Carrier

Confidently carry full-size sheets with the Kreg Panel Carrier. Just clamp, lift, and go! The Panel Carrier features GripMaxx™ jaws that automatically adjust to clamp your material, up to ¾" thick, for a strong and secure hold. An ergonomic grip makes is easy to carry full 4x8 sheets easily using only one hand, and without worrying about dropping, denting, or damaging the panel.

• Large jaws with GripMaxx™ anti-slip surfaces
• Padded, ergonomic handle
• One-handed carry design
• Holds up to 100 pounds.
• Grab onto panelsup to ¾" thick.

• 1 ea. Panel Carrier

Multipurpose Project Blocks

Support, hold, and work on projects anywhere with Kreg Multipurpose Project Blocks. These incredibly versatile blocks elevate your material to sit 1½" above the work surface for convenient sanding, finishing, routing, clamping, cutting, and more. With raised painting points, GripMaxx™ anti-slip surfaces, and a unique design that ensures they won't roll away if dropped, the Multipurpose Project Blocks are must-have tools for every workspace.

• Retractable, locking painting points
• GripMaxx™ anti-slip surfaces
• Hexagon shape to prevent rolling
• 1½" height matches 2x4 boards
• 200-lb. weight capacity (set of four)

• 4 ea. Multipurpose Project Blocks

Pocket-Hole Jig XL

Create pocket holes with twice the strength using the Kreg Pocket-Hole Jig XL. This extra-large jig makes it easy to build big and build strong using 2x4 or 4x4 boards when paired with the impressive holding power of XL Pocket-Hole Screws. Two hard hardened-steel drill guides position a pair of pocket holes at ideal spacing on the width of a 2x4 or 4x4, or easily twist apart and can be used individually to adjust spacing.

• Hardened-steel drill guides
• Twist-apart design
• GripMaxx™ surface
• Included Clamp Adapter

• (1) Pocket-Hole Jig XL
• (1) Easy-set XL Drill Bit with Stop Collar
• (1) XL Driver Bit
• (1) Universal Clamp Pad Adapter
• (1) Hex Wrench

Cabinet Door Mounting Jig

Get a much-needed helping hand for installing cabinet doors with the Kreg Cabinet Door Mounting Jig offers. The jig features a support arm that helps you hold the door with one hand, while your other hand is free to mount the hinges to the cabinet. The Cabinet Door Mounting Jig allows you to mount left-hand and right-hand cabinet doors in any of nine different positions—from inset to 2" overlay at ¼" increments. The jig works with face-frame and frameless cabinets. Included 1⁄16" and 1⁄8" shims allow micro-adjustment up to 3⁄16" during installation.

• Supports cabinet door during installation
• Adjusts in ¼" increments from inset to 2" overlay
• Clamps in place easily for left- or right-hand doors
• Magnetic 1⁄16" and 1⁄8" shims provide micro-adjustment
• Works with face-frame and frameless cabinets

• (1) Cabinet Door Mounting Jig
• (1) Support Arm
• (1) 1⁄16" Magnetic Shim
• (1) 1⁄8" Magnetic Shim

90° Pocket-Hole Driver

Turn any drill into a 90° driver to drive screws in places you couldn't reach before using the 90° Pocket-Hole Driver. The included 3" square-drive bit locks into this driver so the bit won't slip out, An ergonomic design makes the 90° Pocket-Hole Driver easy to grip and control. This impact-rated driver works with all hex-shank bits, so it can be used with driver bits of all kinds.

• (1) 90° Pocket-Hole Driver
• (1) 3" #2 Square-Drive Bit

Quick Flip

Create a variety of strong and simple joints using Kreg Screws and the Quick-Flip. Drill a pilot hole and counterbore with one side, then flip the insert and drive a Kreg Screw with the included #2 square-drive bit on the other side. The Quick-Flip chucks into any drill and accepts any 1⁄4" driver bit.

• (1) Quick-Flip drill/driver bit MSRP

Drilling Guide

Easily create perfectly straight holes using just a hand drill—no drill press required—using the Kreg Drilling Guide. This pocket-size guide has six hardened-steel drill guides—from 1⁄8" to 1⁄2"—hold the bit perpendicular as you drill. Alignment marks and GripMaxx™ surfaces hold the Guide in position on surfaces, and the Guide fits tight onto the edge of ½" and ¾" materials.

• (1) Drilling Guide

• 1/2"
• 3/8"
• 5/16"
• 1/4"
• 3/16"
• 1/8"

Shelf Pin Jig

Create perfectly spaced shelf-pin holes with the Kreg® Shelf Pin Jig. It has six hardened-steel guides on 1¼" (32mm) centers and at backspacing that matches the 32mm cabinet system. A dual-position fence aligns the jig or can be removed to work inside a structure. This jig can also simplify installing concealed hinges and drawer slides in frameless cabinets. Two versions are available: one with a ¼" bit, one with a 5mm bit.

• Hardened-steel drill guides, brad-point bit
• 32mm system compatible
• Jig extension and alignment pin
• Aligns cabinet hinges and drawer slides
• Onboard storage

• (1) Shelf Pin Jig
• (1) ¼" or 5mm Drill Bit
• (1) Locating Pin
• (1) Depth Collar with Hex Wrench
• (4) 1/4" or 5 mm Shelf Pins

Shelf Pins

Hold shelves securely to ensure strong, wobble-free shelf installation with these high-quality pins. Pins are available in packages of 20, enough for five shelves, in both ¼" and 5 mm sizes.

XL Drill Bit

Make bit setup simple. The Kreg XL Drill Bit features our easy-set design with etched material-thickness markings on the bit and a sight-window stop collar. Works with the Pocket-Hole Jig XL, and as a replacement for the Kreg Jig HD Drill Bit.

• Easy-Set Micro-Pocket™ Drill Bit and Stop Collar
• Hex Wrench