Dust Collection

6" to 4" Reducer

6” to 4” Reducers are designed to reduce a large six inch hose down to the 4” hose. Hose clamps are required for proper connection.

Features:

• Connect most 4" dust collection hose to machines with 6" O.D. ports
• Tapered port on one side fits inside most 4" dust collection hose
• Straight port actual 5-7/8" O.D. to fit most 6" machine ports
• Flanged middle section for ease of assembly - Constructed of tough abrasion resistant plastic resins

5" to 4" Reducer

5” to 4” Reducers are designed to reduce a large 5" hose down to the 4” hose. Hose clamps are required for proper connection

Features:

• 5 inch to 4 inch reducer
• Designed to reduce a large 5" hose down to the 4” hose

Includes:

• 5 inch to 4 inch reducer - 1 each

4" to 3" Reducer

4” to 3” Reducer is a straight non-tapered fitting that allows you to connect your 4” hose to your 3” hose. Hose clamps are required for proper connection.

Features:

• 4 inch to 3 inch reducer
• Straight non-tapered fitting
• Allows you to connect your 4” hose to your 3” hose

Includes:

• 4 inch to 3 inch reducer - 1 each

4" to 2-1/2" Reducer

The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more! This cone shaped reducer can be also be used on machinery with a little help from some other accessories.
›See more product details

×

4" to 2-1/2" Reducer

The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!

One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.

4 inch to 2-1/2 inch Hose to Hose Reducer

Many machines, dust collectors, workshop vacuums and other power tools come in many different shapes and sizes, the two most common hose size in the woodworking industry is by far the 4" diameter hose and the 2-1/2" diameter hose. With that, we sometimes have to connect the two hoses together in order to connect to our workshop vacuums or wet/dry vacs. While we could of course use a whole lot of duct tape to kinda sorta achieve this, why not use the one and only fitting designed specifically for this purpose.

Hose to Hose

This fitting is designed to be used when connecting or reducing 4" hose to 2-1/2" hose. While there are other uses for this fitting, this is the primary function. All you need is a 4" hose clamp and a 2-1/2" hose clamp to secure your two hoses to the reducer.

Machine Port to Hose

Another function of this reducer is to to connect to 4" machine port opening. Many band saws, cabinet table saws, planers and more incorporate a 4" port. To correctly secure the reducer you will need to use either a small hose section or a rubber coupler fitting as shown above. The hose section and the rubber coupler are NOT included with the reducer.

Plug in Your Wet/Dry Vac Hose

Many of the hoses used for larger workshop vacuums use a 2-1/2" plug size. This size conveniently plugs right into the Fulton 4 inch to 2-1/2" reducer.

The Reducer Accepts Most Standard Wet/Dry Vac hoses

Tag this on to the "little known secret" category of features for this reducer. This reducer accepts most wet dry vac hoses to make connecting your vacs a literal breeze!

Quick and Easy

With the proper accessories, the Fulton 4 inch to 2-1/2 reducer is very easy to setup and the setup takes virtually no time at all! Simply attach the reducer to a hose section or rubber coupler and attach that to your machine and you're ready to go!

Measure Up

Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.

Close

• 4 Inch to 2 1/2 inch reducer
• Most commonly used size for most big box store wet/dry vacuums and shop vacuums
• Made from high quality ABS plastic

The reducer measures:
Nominal 4 inch end is 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.

Note: All of the dimensions may slightly vary due to slight variations in the manufacturing process.

4" to 2-1/2" Reducer
w/ 4" Rubber Coupler Fitting & Turn Key Clamps

Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.
›See more product details

×

4" to 2-1/2" Reducer

with 4 inch Flexible Cuff Rubber Coupler

Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.

Features:

• Connect a 2-1/2" hose directly to a 4” port
• Designed to accept most standard size 4" dust collection fittings
• Two stainless steel hose clamps help provide a tight seal
• Blue turn key mechanism for easy tightening and loosening
• Works with Most Wet/Dry Vacuum Hoses
• Made from high quality ABS plastic

Includes:

• 1 ea. 4" to 2-1/2" Reducer
• 1 ea. 4" Rubber Coupler Fitting & Turn Key Clamps

Reduce 4" Ports on Machinery Down to a 2-1/2" Hose Size

With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more.

Designed to Accept Most Standard Size 4 inch Dust Collection Fittings

This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates. Two stainless steel hose clamps help provide a tight seal on the 4 inch end and keep the reducer from falling out. These clamps fit neatly into the slots around the coupler so there is no slipping when tightened. No more busting your knuckles. Each clamp is equipped with a blue turn key mechanism to make tightening and loosening the clamp super easy.

Works with Most Wet/Dry Vacuum Hoses

Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most professional and us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.

The Perfect Kit for a 4" Port

Most common workshop machines are equipped with a 4" port. This kit is perfect for those who don't own a large dust collector or simply want to use a shop vacuum for certain projects

High Quality Durability

Made from high quality ABS plastic for extended periods of use, the reducer fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4” end is 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID. Dimensions may slightly vary due to slight variations in the manufacturing process.

Easy to Install and Easy to Remove

The rigid rubber coupler seals tightly around the reducer for excellent airflow. Easy to install and easy to remove. As with most all other dust collection fittings, it’s always a good idea to have extra on hand for when you need it. It’s always better to have it and not need it than it is to need it and not have it. The coupler measures: 4-5/16" OD and 4” ID. Height: 2-3/4"

Close

Features:

• Connect a 2-1/2" hose directly to a 4” port
• Designed to accept most standard size 4" dust collection fittings
• Two stainless steel hose clamps help provide a tight seal
• Blue turn key mechanism for easy tightening and loosening
• Works with Most Wet/Dry Vacuum Hoses
• Made from high quality ABS plastic

Includes:

• 1 ea. 4" to 2-1/2" Reducer
• 1 ea. 4" Rubber Coupler with Turn Key Clamps

4" to 2-1/2" Reducer
with 4" Flexible Cuff Rubber Coupler

Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more. This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.
›See more product details

×

4 inch to 2-1/2 inch Reducer

with 4 inch Flexible Cuff Rubber Coupler

Reducing a 4 inch dust port on your machinery has never been easier! With our 4 inch to 2-1/2 inch hose reducer fitting and rubber coupler you can connect a 2-1/2 inch hose directly to a 4” port on machines like band saws, table saws, large planers and more.

Reduce 4" Ports on Machinery Down to a 2-1/2" Hose Size

This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings.

Designed to Accept Most Standard Size 4 inch Dust Collection Fittings Such as Y’s, T’s and Elbows

This convenient combo pack is designed to accept most standard size 4 inch dust collection fittings such as Y’s, T’s, Elbows, Blast gates, Dust ports and other standard size 4 inch dust collection fittings. Two stainless steel hose clamps help provide a tight seal on the 4 inch end and keep the reducer from falling out. These clamps fit neatly into the slots around the coupler so there is no slipping when tightened. Each clamp has a universal nut that can be tightened with a flat head or a Philips head screwdriver. The nut can also be tightened using an appropriate size socket wrench.

Most Wet/Dry Vacuum Hoses Will Plug Directly In

Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most professional and us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.

Use the Rubber Coupler to Connect Blast Gates to Fittings

The rigid rubber coupler seals tightly around the reducer for excellent airflow. Easy to install and easy to remove. As with most all other dust collection fittings, it’s always a good idea to have extra on hand for when you need it. It’s always better to have it and not need it than it is to need it and not have it. Please Note: Extra coupler, hose, blast gates and T fitting are NOT included.

4" to 2-1/2" Reducer Dimensions

The reducer measures: Nominal 4” end is 3-61/64” OD and 3-43/64” ID; 2-1/2” nominal OD end measures 2-31/64” OD and 2-5/16” ID. Dimensions may slightly vary due to slight variations in the manufacturing process.

Rubber Coupler Dimensions

The coupler measures: 4-5/16" OD and 4” ID. Height: 2-3/4"

Close

Features:

• Connect a 2-1/2" hose directly to a 4” port on machines
• Accepts most standard size 4 inch dust collection fittings
• Stainless steel hose clamps
• Each clamp has a universal nut that can be tightened with a flat head or a Philips head screwdriver

Includes:

• 1 ea. 4" to 2-1/2" Reducer
• 1 ea. Rubber Coupler

4" to 2-1/2" Threaded Quick Connect Reducer

4” to 2½” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/2” hose by simply threading it on. No hose clamps are required.

Features:

• 4 inch to 2-1/2 inch reducer
• Designed to be pressed on to any 4” taper diameter opening for a quick and easy fit
• The opposite end accepts a 2-1/2” hose by simply threading it on

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

4" to 2-1/4" Threaded Quick Connect Reducer

4" to 2-1/4" Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/4” hose by simply threading it on. No hose clamps are required.

Features:

• 4 inch to 2-1/4 inch reducer
• Designed to be pressed on to any 4” taper diameter opening for a quick and easy fit
• The opposite end accepts a 2-1/4” hose by simply threading it on

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

4" to 2" Reducer

4” to 2” allows you to reduce from a 4” hose down to a 2” hose. Hose clamps are required for this type of connection.

Features:

• 4" Hose to 2" Hose Reducer
• Sturdy ABS plastic construction
• Designed to be pressed on to any 4” taper diameter opening for a quick and easy fit
• The opposite end accepts a 2-1/4” hose by simply threading it on

Includes:

• 4" to 2" Reducer - 1 each

3" to 2 1/2" Reducer

3” to 2-1/2" allows you to reduce from a 3” hose down to a 2-1/2" hose. Hose clamps are required for this type of connection or the small end accepts a standard 2-1/4" Shop-Vac® hose end. Only one hose clamp is required on the opposite 3” end for this type of connection.

Features:

• 3" Hose to 2-1/2" Hose Reducer
• Reduce from a 3” hose down to a 2-1/2" hose

Includes:

• 3" to 2 1/2" Reducer - 1 each

3" to 2 " Reducer

3” to 2” Reducer will allow you to connect your 3” dust collection hose to a 2” hose. Hose clamps are required for proper connection.

Features:

• 3” to 2” Reducer
• Connect your 3” dust collection hose to a 2” hose

Includes:

• 3” to 2” Reducer Reducer - 1 each

2-1/2" 360° Rotating Adaptor w/ Screw End

Tired of twisted hose when trying to plug into one or more of your shop machines? If so, then this is the perfect adaptor for you. The 360° rotating adaptor rotates with your hose as you make any adjustments or move to other machines. The adaptor screws into most standard 2-1/2" vacuum hoses making it perfect for most Shop Vacs®. This also means that you do not need any hose clamps to secure the adaptor.

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

2-1/2" Screw End Adaptor

2-1/2" Screw End Adaptor allows you to attach a 2-1/2" hose to it by just screwing the hose on, and then plug right into most any wet/dry vac and other standard 2-1/4" openings. No hose clamps are required.

Features:

• 2-1/2" Screw End Adaptor
• Plug right into most any wet/dry vac and other standard 2-1/4" openings
• No hose clamps are required

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

4" Screw End Adaptor

The 4" Screw End Adaptor allows you to attach a 4" hose to it by just screwing the hose on and will fit into most tapered openings.

Features:

• Use for 4" Dust Collection Hose
• Will fit most tapered openings
• 3-23/64" I.D.
• 3-17/32" Taper up to 3-49/64" O.D.

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

2-1/2" to 1-3/4" Reducer

2-1/2" to 1-3/4" Reducer will allow you to connect your 2-1/2" dust collection hose to a 1-3/4" hose. Hose clamps are required for proper connection.

Features:

• 2-1/2" to 1-3/4" Reducer
• Connect your 2-1/2" dust collection hose to a 1-3/4" hose

Includes:

• 2-1/2" to 1-3/4" Reducer - 1 each

2-1/2" to 1-1/4" Reducer

2-1/2" x 1-1/4" Reducer not only reduces down to 1-1/4" size opening, it will allow you to plug in to various chop saws, orbital sanders and other power tools with with a small dust port. Hose clamps are required for proper connection.

Features:

• 2-1/2" x 1-1/4" Reducer
• Plug in to various chop saws, orbital sanders and other power tools with with a small dust port

Includes:

• 2-1/2" x 1-1/4" Reducer - 1 each

2-7/32" to 1-1/2" Reducer

2-7/32” x 1-1/2" Reducer is used to reduce a 2-1/2” hose down to a 1-1/2” hose, it can also be used on small power tool ports such as belt sanders, palm sanders and more. Hose clamps are required for proper connection.

Features:

• 2-7/32" x 1-1/2" Reducer
• Reduce a 2-1/2" hose down to a 1-1/2" hose
• Can also be used on small power tool ports such as belt sanders, palm sanders and more

Includes:

• 2-7/32" x 1-1/2" Reducer - 1 each

2-1/2" to 2-1/4" Reducer

2-1/2" to 2-1/4" Reducer, reduces in a smaller increment than normal, it only steps down a 1/4” of an inch. The reason for this is, specific machinery setups like Shop-Vac® can use this fitting as a plug adaptor for the hose assembly.

Features:

• 2-1/2" to 2-1/4" Reducer
• Reduces 1/4”, a smaller increment than normal
• Specific machinery setups like Shop-Vac® can use this fitting as a plug adaptor for the hose assembly

Includes:

• 2-1/2" to 2-1/4" Reducer - 1 each

2-1/4" to 1-1/2" Reducer

2-1/4" to 1-1/2" Reducer, The large end plugs directly into any standard 2-1/4" Shop-Vac® opening or any dust collection fitting that accepts a Shop-Vac® hose end. The small end is tapered to a 1-1/2” O.D that works with a variety of small power tools or a standard 1-1/2” vacuum hose, which is most commonly found on Porter Cable brand hoses.

Features:

• 2-1/4" to 1-1/2" Reducer
• The large end plugs directly into any standard 2-1/4" Shop-Vac® opening or any dust collection fitting that accepts a Shop-Vac® hose end
• Works with a variety of small power tools or a standard 1-1/2” vacuum hose

2-1/2" to 2-1/4" Reducer /Plug

2-1/2 x 2-1/4" Reducer is the absolutely perfect reducer to attach your standard 2-1/2” hose directly to most Shop-Vacs®. Clamp on your 2-1/2” hose on the large end and simply plug the small end directly into to your vac or any fitting with a 2-1/4” opening.

Features:

• 2-1/2" to 2-1/4" Reducer
• Perfect reducer to attach your standard 2-1/2” hose directly to most Shop-Vacs®

Includes:

• 2-1/2" to 2-1/4" Reducer - 1 each

2 1/4" to 4" Enlarger

2-1/2" to 4" Enlarger is a brand new fitting made of flexible plastic. This is one of those fittings that woodworkers have wondered, why don’t they make a fitting that goes directly from my 4" hose into my Shop Vac®? Well, here it is, an enlarger that accepts a 4" hose on one end, and the other plugs directly into a standard 2-1/4" Shop Vac® opening. A hose clamp is required on the 4" end for proper connection .

Features:

• 2-1/4" TO 4" Enlarger is made of flexible plastic.
• Accepts 4" hose on one end
• The other end plugs directly into a standard 2-1/4" Shop Vac opening.

6" x 4" Y Adaptor

This 6" x 4" Y Adaptor has a 6" I.D. on the large inlet side and 3-15/16" O.D.'s on the two Y inlets. This Adaptor will adapt a single 6" O.D. pipe or connection to two 4" connections for 4" dust collection hose.

Features:

• 6" I.D. on the large inlet side and 3-15/16" O.D.'s on the two Y inlets.
• Will adapt a single 6" O.D. pipe to two 4" dust collection hose

Includes:

• 6" x 4" Y Adaptor

4-1/2" To 4" Dust Collection Hose Adaptor

4-1/2" To 4" Dust Collection Hose Adaptor is used to connect your dust collection line to your standard 4" dust collection hose. Hose clamps are required for this type of connection.

Features:

• 4-1/2" To 4" Dust Collection Hose Adaptor
• Appx. OD on small end 4" x OD on large end 4"-1/2".
• Please check o.d size of PVC to make sure fitting will work
• Hose clamps are required for this type of connection.
• Used to connect your dust collection line to your 4" dust collection hose.

Offset 4" to 2-1/4" Adaptor

This unique Offset Adaptor lets you rotate the adaptor while setting it to your system in order to set the line out in just the perfect position. With the Offset adaptor you can now clear obstacles like wall studs or other items with out having to move fixed dust collection components.

Features:

• 4" to 2-1/4" Adaptor
• Lets you rotate the adaptor while setting it to your system in order to set the line out in just the perfect position
• Clear obstacles like wall studs or other items with out having to move fixed dust collection components

Flexible Rubber Dust Collection Fittings

Having difficulty connecting odd sized tool openings or European size fittings? The Rubber fittings are a perfect solution. The soft rubber fitting will stretch, flex and give allowing for a tight connection on a number of small power tools.

Features:

• Will stretch, flex and give allowing a tight connection
• Use to connect many different small power tools to your dust collection system
• Great for odd sized tool openings

4" DWV (drain, waste, vent) PVC Pipe to
4" Hard Plastic Dust Collection Fitting

This adaptor allows you to go from common 4" DWV (drain, waste, vent) PVC pipe commonly available at home-centers to 4" dust collection fittings like elbows, T's, Y's and blast gates.

Note: Sample Use, fittings not included.

4" DWV (drain, waste, vent) PVC Pipe
to 4" Dust Collection Hose Plastic Adaptor

This adaptor allows you to go from common 4" DWV (drain, waste, vent) PVC pipe to 4" dust collection hose. Now you can go from 4" DWV (drain, waste, vent) PVC pipe directly to 4" dust collection hose with just this one adaptor. Works with all our 4" dust collection hose. See dust hose

Note: Sample Use, fittings not included.

4" to 2 1/2" - "Y" Fitting

Depending on your woodworking shop dust collection system, you generally will need to use different diameter hoses from time to time. Typically, the most commonly used diameter hoses are 4” and 2½”. When reducing from 4” diameter to 2½” we usually buy a reducer fitting. With the 4” to 2½” Y you’ll be able to reduce your hose line without an extra fitting! This makes your dust collection setup process a step or two quicker and easier.
›See more product details

×

4" to 2-1/2" Reducer

Depending on your woodworking shop dust collection system, you generally will need to use different diameter hoses from time to time. Typically, the most commonly used diameter hoses are 4” and 2½”. When reducing from 4” diameter to 2½” we usually buy a reducer fitting. With the 4” to 2½” Y you’ll be able to reduce your hose line without an extra fitting! This makes your dust collection setup process a step or two quicker and easier. The Fulton 4” to 2½” Y fitting is ideal for not only reducing your hose line from 4” to 2½”, it is also ideal for re-directing your airflow to effectively gain maximum suction into your dust collector. To re-direct airflow using the 4” to 2½” Y you’ll need a blast gate (NOT included) for the 4” port, the 2½” or both ports. This way you can close the airflow from one diameter hose line to the other at your convenience.

The perfect junction for reducing hose size and more

Lets face it, no two dust collection systems are alike. We all have to build, maintain and adapt our systems to our ever changing workshops. The Fulton 4" to 2-1/2" Y is the ideal fitting to help you in the dust collection process. Being able to not only split your hose lines, but to be able to split off into a 2-1/2" hose line gives much more versatility in terms of what machines can be attached to your dust collector.

Its Easy to Connect

Using Hose clamps (NOT included) to keep the hose on the Fulton 4" to 2-1/2" Y provides more than enough holding power to keep the air flowing through your lines. The Y has recessed ports to make adding or removing hose lines quick and easy.

Add a Blastgate...

Add a blastgate (NOT included) for maximum airflow control! Using a blastgate allows to effectively close one hose line in order for the airflow to only go through the other. Doing this not only re-directs airflow, but it provides you with maximum airflow efficiency since all the air is traveling through one line.

4” to 2½” Y Fitting Features

• Textured body for easy handling
• Made from durable plastic material

• Dual ports, reducing hose size is easy
• Smooth, recessed ports for hose

4” to 2½” Y Fitting Features

• Angled 2½” port for better airflow
• Can be attached to different styles of hose

• Ideal for woodworking shops
• Recessed ports on all three openings

4” to 2½” Y Fitting Features

• Smooth Interior
• Prevents buildup

• Provides better airflow
• Makes cleanup a breeze

Measure Up

The Fulton 4" to 2-1/2" Y is ideal size for any woodworking shop with a dust collection system that needs to reduce and re-direct hose lines.

Close

Features:

• Recessed ports on all three openings
• Each recess has more than enough length to easily accommodate PVC or standard style dust collection hose.
• The 2½” port is angled on the side of the 4” to 2½” Y for better airflow.
• The inside of the 4” to 2½” Y is smooth to help prevent the dust and debris that passes through the Y from clogging and building up.
• Can be attached to different styles of hose
• Ideal for large and small woodworking shops