Drilling / Boring

Micro-Pocket™ Drill Bit

This unique bit works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole (15/16"-long). Micro-Pocket™ holes work great in virtually every application where you’d use standard pocket holes, and are especially good for 1/2" (12mm) thick material and narrow stock, down to 1" (25mm) wide. Because the bit removes less material, drill strokes are faster and easier.

For Use With:
Compatible with the Kreg Jig® K3, K4, K4MS, and K5, when being used with the Micro-Pocket™ Drill Guide. Also compatible with the Foreman Pocket-Hole Machine

• Works with the Micro-Pocket™ Drill Guide to create a 25% smaller pocket hole
• For use with the Kreg Jig® K3, K4, K4MS, and the Foreman Pocket-Hole Machine (Item# DB210)
• Works great in almost every application where you'd use standard Kreg® pocket holes
• Especially good for 1/2" (12mm) thick material and narrow stock, down to 1" (25mm) wide
• Faster, easier drill strokes because the bit removes less material
• 19/64" (7mm) diameter, 0.170" (4mm) diameter pilot tip
• One-piece, industrial high-speed steel

90° Pocket Hole Bit Kit

This 90° Pocket Hole drill bit is made from high speed steel. The bit is designed to virtually eliminate clogging and the drills smother and fasterthan standard drill bits. It measures 3/8" in diameter so it can be used in most pockethole jig units. This kit also includes a handy depth stop for accrate depth drilling and a hex key wrench for adjusting the depth stop.

Kreg Jig® HD (Heavy-Duty) Drill Bit

The Kreg Jig® HD (Heavy-Duty) Drill Bit was made specifically for Kreg Joinery™ and exclusive use with the Kreg Jig® HD. It features a 1/4" (6mm) hex shank, Kreg® Quick-Change Chuck compatibility, and drills a 1/2" (12mm) diameter pocket hole.

For Use With: For exclusive use with the Kreg Jig® HD.

Features:

• For use with the Kreg Jig® HD manual pocket-hole jig
• Compatible with Kreg Quick-Change Chuck and standard chucks
• Drills 1/2" (12mm) diameter pocket holes
• One-piece, hardened-steel design

Depth Collar & Allen Wrench for Stepped Drill Bit

This rugged depth collar and Allen wrench works with any 3/8" (9mm) diameter stepped Kreg® drill bit. It was specifically designed for controlling the depth of your drill bit when drilling standard pocket holes with any manual Kreg Jig®.

• Rugged depth collar and Allen wrench
• Works with any 3/8" (9mm) diameter stepped Kreg® drill bit
• Designed to control depth of the drill bit
• For use with any manual Kreg Jig®

7 Piece Split Ring Depth Stop Set

Black oxide steel stop collars use hex screws (wrenches included) that tighten the collar around the bit, rather than locking into the flutes, so they are less likely to loosen or damage the flutes. Seven-piece set has collars to fit drill bits.

Set Includes:

• 1 ea. 1/8” Depth Stop
• 1 ea. 3/16” Depth Stop
• 1 ea. 1/4” Depth Stop
• 1 ea. 5/16” Depth Stop
• 1 ea. 3/8” Depth Stop
• 1 ea. 7/16” Depth Stop
• 1 ea. 1/2” Depth Stop
• Hex key

3" & 6" #2 Square Driver Combo

All Kreg® drivers features a solid one-piece construction, magnetic tip, and Kreg® Quick-Change Chuck compatibility for fast and easy bit changes. This combo includes one 3" (76mm) square driver and one 6" (152mm) square driver. The 6" version offers the most flexibility and ease-of-use for your projects. The 3" version is handy when you’re working in tight spots where the 6" driver can’t reach.

• Solid one-piece construction
• Quick-Change compatible Magnetic tip

Item #1489 Includes:

• 1 ea. 3" (76mm) #2 square driver
• 1 ea. 6" (152mm) #2 square driver

6" #2 Square Driver Two Pack Combo

All Kreg drivers features a solid one-piece construction, magnetic tip, and Quick-Change compatibility for fast and easy bit changes. The 6" #2 Square Driver Combo includes two 6" drivers, offering the most flexibility and ease-of-use for your projects.

• Solid, one-piece constriction
• Quick-Change compatibile
• Magnetic tip

Includes:

• 2 ea. 6" #2 square drivers