Drill Press & Accessories

T-Track Hold Down

These t-track hold down clamps are designed to work with our T-Track opening for either 3/8" or 1/4" sizes. The bottom of the clamp slides neatly into your t-track slot, and is adjustable to anywhere along the track. The clamp is fitted with a 2-3/8” brass foot for excellent holding power. The clamping capacity is approx. 2-1/8”. This package is available in packs of two in 1/4” or 3/8" sizes.

Features:

• Designed to work with our T-Track opening for either 3/8" or 1/4" sizes
• Fitted with a 2-3/8” brass foot for excellent holding power
• Clamping capacity is approx. 2-1/8”
• Available in packs of two in 1/4” or 3/8" sizes.

#2989 - 1/4" T-Track Hold Down:

• Used with Mini T-Track

#2990 - 3/8" T-Track Hold Down:

• Used with HD T-Track

Note: T-Track & Drill Press Table not Included.

Drill Press Adapter for Kreg Bench Klamp™

With this handy adapter you can mount your Kreg Bench Klamp to most any drill press table. The adapter fits into most through slots on drill press tables to allow the top thread to protrude through the top of your drill press table. This allows you to quickly attach and remove your Kreg Bench Klamp as needed. Perfect for holding down large a small pieces of stock on your drill press table. The Drill Press Adapter is available individually or may be purchased with a 3” or 6” Kreg Bench Klamp™. Fits tables with 1/2” wide slots.

Features:

• Mount your Kreg Bench Klamp to most any drill press table
• Fits into most through slots on drill press tables
• Perfect for holding down large a small pieces of stock on your drill press table
• Fits tables with 1/2” wide slots

Drill Press Clamps

The 9" or 12" Drill Press Clamp secures boards and materials to your drill press table, allowing for a clean and accurate cut every time.

Features:

• Clamp boards up to 5" thick
• 3-1/2" Throat Capacity
• Tension adjustment knob changes the strength of the clamp's grasp
• Fastens easily to drill press table slots
• Quick release lever makes for simple disengagement
• Available in 9" and 12" sizes

Drill Press Clamps

This Drill Press Clamp adjusts quickly and easily to lock your work piece in any position. The clamping pad pivots to conform to any work piece, ensuring uniform pressure. Table top must have hole through slots. The clamps are like vise grips, so it insures that when applied the grip is secure.

Features:

• Adjusts quickly and easily
• Lock your work piece in any position
• clamping pad pivots to conform to any work piece, ensuring uniform pressure
• Secure grip

Comes in three sizes:

• 6" Long with 1-1/2" Capacity
• 10" Long with 3" Capacity
• 12" Long with 5" Capacity

Cam Action Hold Down Clamp

Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Our exclusive cam clamps will solve your problem and give you a quick release for all of your jigs and fixtures. Cam clamps come with a standard 3” long hex head bolt that works with our T-track, or you can swap it with a bolt from one of your own jigs. Each cam will exert up to 400 pounds, depending on how you set it.
›See more product details

×

Cam Action Hold Down Clamp

Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences.

Features:

• Each cam will exert up to 400 pounds, depending on how you set it.
• Clamp body is made out of aluminum
• Measures approximately 1-1/2” long
• Standard 3” long hex head bolt that works with most standard sizes of t-track

Quick Release Clamping

Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place.

Works With Most Standard Sizes of T-Track

The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in.

Available in 1/4" 5/16” and 3/8” Hex Head Bolt Sizes

The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations. For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it.

Each Size Sold Separately

Close

Features:

• Each cam will exert up to 400 pounds, depending on how you set it.
• Clamp body is made out of aluminum
• Measures approximately 1-1/2” long
• Standard 3” long hex head bolt that works with most standard sizes of t-track

Available in three sizes:

• 1/4" x 20 tpi
• 5/16" x 18 tpi
• 3/8" x 16 tpi

Aluminum Hold Downs

The Hold Down Clamp slides in the T-Track and quickly secures with the turn of the knob. By turning the clamp head 180° to the work piece, the clamp offers a dual capacity of 0" to 2” on one side and 0” to 3” on the other side. Once the track is installed on your router table or drill press table, you can utilize these hold downs for maximum holding pressure.

#1145 - 1/4" Aluminum Hold Down:

• Used with Mini T-Track
• Uses 1/4" x 20 tpi Bolt & Knob

#1146 - 3/8" Aluminum Hold Down:

• Used with HD T-Track
• Uses 3/8" x 16 tpi Bolt & Knob

Aluminum Hold Downs with T-Track

These packages include the Aluminum Hold Downs and the T-Track for installing on your drill press table, router table, workbench or any work surface you desire.

#1026 Includes:

• 1 ea. 24" Mini T-Track
• 2ea. Aluminum Hold Down with 1/4" x 20 Bolts

#1027 Includes:

• 1 ea. 48" Mini T-Track
• 2ea. Aluminum Hold Down with 1/4" x 20 Bolts

#1024 Includes:

• 1 ea. 24" HD T-Track
• 2ea. Aluminum Hold Down with 3/8" x 16 Bolts

#1025 Includes:

• 1 ea. 48" HD T-Track
• 2ea. Aluminum Hold Down with 3/8" x 16 Bolts

PVC Tipped Aluminum Hold Downs

These PVC Tipped Hold-Down Clamps feature non-marring PVC tips that are the perfect tool for working with softer woods, finished surfaces or any stock that needs to kept in place. The PVC also gives you more gripping power when pressure is applied to your stock. This prevents slipping and walking of your wood especially when drilling on a drill press. Our PVC tipped hold downs come with a star knob and bolt and are available in the two most commonly used sizes of 1/4" x 20 and 3/8 x 16.

#1162 - 1/4" PVC Tipped Aluminum Hold Down:

• Used with Mini T-Track
• Uses 1/4" x 20 tpi Bolt & Knob

#1163 - 3/8" PVC Tipped Aluminum Hold Down:

• Used with HD T-Track
• Uses 3/8" x 16 tpi Bolt & Knob