Clamps & Accessories

×

Spring Miter Clamps and Pliers

If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly.

The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart.

A simple way to clamp corners

The uniquely designed Fulton spring miter clamps are easy and quickly secured to corner joints on wood projects such as frames and molding. When used with the Fulton pliers you can secure 90 degree corners in seconds allowing you to work the remaining corners on your project. With the corners being held together you can let the glue dry (if used) or brad nail the corner joints together.

Easy and Quick

The Fulton spring miter clamps make easy work on your corner clamping chores. You'll be able to quickly attach or remove spring clamps as needed to help you get your project get done in a more efficient manner.

You can never have too many clamps...

As the old say goes, you can never have too many clams. This is especially true when working larger projects like crown molding. The more clamps you have the better the holding power becomes. Using these spring miter clamps sure beats lugging around large, heavy and cumbersome clamps that don't work half the time.

Great for Frames

While the spring clamps can be used almost anywhere, they excel when being used for assembling frames. With there ease of application, they make frame work quick and really easy compared to larger clamps.

Better Design, Better Results

Many of the older style spring clamps leave large, un-sightly holes, tears and gouges on your wood after you remove them. The old style clamps have chiseled points that gouge and tear at the wood which produces bad looking and not to mention hard to repair marks. The Fulton spring clamps with the sharp, piercing point tips leave small marks that can be difficult to see at times. This makes the finishing process much easier than with the older style of spring clamp.

The Hip Clip

The hip clip allows you to clip multiple Fulton spring clamps on to your belt loop so they are ready at a moments notice. This comes in incredibly handy when working on projects overhead like crown molding. The clip has a spring loaded hasp that keep the clamps inside the slip until you are ready to grab one.

×

Spring Miter Clamp Set

If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly

These Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using the easy to load, Spring Tensioned Pliers to make it super easy to to spread the tips apart.

A Complete Set for The Workshop or Jobsite!

Clamping odd angles with standard clamps can be challenging. Our Spring Miter Clamps set is designed to make this application easier and much less time consuming. With the spring loaded pliers and steel spring clamps you'll be able to quickly clamp 45 degree mitered corners in seconds! The set comes in a super convenient carrying case which makes it perfect for working in your workshop or taking with you on the jobsite!

Keeping it together

Each steel spring clamp provides the perfect amount of tension to hold the corners of your project together. You can then use a brad nailer to secure the corners or, simply let the glue dry if it was applied prior to clamping.

Clamp Using the Pocket Hole

The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.

The Perfect Pliers for Spring Miter Clamping

With these spring tensioned pliers and top and bottom clips for multiple size spring clamps, these pliers are the perfect pliers for use with these spring miter clamps. The pliers also have a comfortable rubber grip for extended periods of use.

Quick and Easy

While holding one side of a spring clamp in place against a plier clip, simply put firm pressure on the other side of the spring clamp to snap it on to the pliers. Once loaded, you are ready to apply the clamp to the corner of your work piece.

Squeeze to Spread

Once the pliers are loaded with a clamp, simply squeeze the spring loaded pliers to spread the clamp. The more you squeeze the pliers, the wider the spring clamp opens. This allows you to quickly apply the spring clamp to a corner of your workpiece and keep the corner in place

What does it come with?

×

Clamping Squares

90° angle can be challenging more often than not. A simple solution is to place a square in the corner nof the two stock pieces you need to square and secure with a set of clamps, this however can be frustrating. Now with our Clamping squares, you can do just that without having to find a square thick enough to accept a standard clamp. The clamping squares are 3/4" thick to make clamping and placement a breeze. Each square is made from aluminum and machined with a tolerance of +/- .001. The squares have beveled edges and are anodized to resist staining. The squares are available in two sizes: 2-3/4" and 6" and come in packs of two.

×

Square 90

The simple and easy to use Square 90 will become your third hand while assembling cabinets, drawers, boxes or any project that requires a 90° corner to be held in place while assembling. You can use the Square 90 in multiple situations where a 90 degree angle is needed.

Square 90 Positioning Squares

The Square 90 can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more! Made from high impact polycarbonate, the Square 90 is strong and durable enough for any project. It can be clamped on the inside or outside

×

90° Angle / Corner Clamps

The Bessey angle clamps are designed to hold, fix and align material at right angle and automatically adjust to different wood thickness. Their accuracy makes these the clamps for a number of applications, including cabinetry, furniture assembly and their compact size makes them easy to store.

×

90° Corner Clamp

The easy way to hold 90° corner joints and “T” joints in boxes, cabinets, and cases
The Kreg® 90° Corner Clamp gives you the helping hand you need to hold 90° corners and “T” joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° Corner Clamp leaves both of your hands free to add your fasteners.

The 90° Corner Clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.

Helps Hold Assemblies Like Boxes, Cabinets, Drawers and Cases

The 90° Corner Clamp helps hold assemblies like boxes, cabinets, drawers and cases together to ensure that you get strong, tight-fitting assemblies—whether you’re using Kreg pocket-hole joinery, or another method.

V-wedge Jaws Ensure a Secure Grip

The clamp’s V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg Screws, or even another type of fastener, such as a nail or wood screw.

All-Metal Construction

The 90° Corner Clamp features all-metal construction, including cast-aluminum pads—an outer "V" and inner wedge—that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another.

Edge Stops Help Align the Edges

Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases.

Automaxx® Auto-adjust Technology

Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you’re using thin plywood for drawers, or materials up to 1" thick.

×

Right Angle Clamp

The secret weapon for pocket-hole construction—now with Automaxx® Technology
The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.

Right Angle Clamp Features

• 3-1/2" reach (89mm); clamps materials up to 31/8" thick (79mm)
• Auto adjusts to match material thickness
• Steel pin fits snugly into pocket hole
• Swiveling pad secures mating piece
• Adjustment knob provides easy-to-regulate clamping pressure
• Ergonomic padded grips prevent hand fatigue

Ultra-Wide Reach

Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.

Auto-Adjust Technology

Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2" plywood to thick 2x4 boards.

Swivel Pad for Solid Clamping

The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.

Clamp Using the Pocket Hole

The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.

Use One Clamp, or Use Two

Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.

×

Merle Band Clamp

Flexible jaw inserts are non-marring and are easily removed. They're made of high impact ABS plastic for long life and heavy use. The dual pivot feature allows the Merle to clamp virtually any size or shape securely! Perfect for circles and ovals, plus triangles, hexagons, octagons, and more. 23-foot steel banding included. The Merle clamp has almost no capacity limitation! Clamps as small as 2-5/8" x 2-5/8 to69" x 69" or 23-feet around, but can be extended to any length by using standard 3/8-inch steel banding or strapping. The Merle clamp will hold any type of frame for easy gluing, nailing or screwing. Even jointing force at all corners. It's excellent for wide cabinet type frames (use in the center or edges), and also for narrow picture frames. The adjustable Merle clamp allows you to use as much or as little clamping pressure as needed. Cast aluminum and steel construction makes the Merle clamp a tough tool that will work hard and long for you. Quick Release Corner Clips pull off with finger pressure. Just clip on more corners and get to work!