Clamps & Accessories

Clamping Squares

90° angle can be challenging more often than not. A simple solution is to place a square in the corner nof the two stock pieces you need to square and secure with a set of clamps, this however can be frustrating. Now with our Clamping squares, you can do just that without having to find a square thick enough to accept a standard clamp.
›See more product details

×

Clamping Squares

90° angle can be challenging more often than not. A simple solution is to place a square in the corner nof the two stock pieces you need to square and secure with a set of clamps, this however can be frustrating. Now with our Clamping squares, you can do just that without having to find a square thick enough to accept a standard clamp. The clamping squares are 3/4" thick to make clamping and placement a breeze. Each square is made from aluminum and machined with a tolerance of +/- .001. The squares have beveled edges and are anodized to resist staining. The squares are available in two sizes: 2-3/4" and 6" and come in packs of two.

Features

• 3/4" thick to make clamping and placement a breeze
• Each square is made from aluminum and machined with a tolerance of +/- .001
• Beveled edges
• Anodized to resist staining
• Available in two sizes: 2-3/4" and 6"
• Comes in packs of two.

Close

Features:

• 3/4" thick
• Each square is made from aluminum and machined with a tolerance of +/- .001
• Beveled edges
• Anodized to resist staining
• Available in two sizes: 2-3/4" and 6"
• Comes in packs of two.

Note: F-Clamps not included.

Square 90

This simple and affordable Square 90 becomes your third hand while assembling cabinets, drawers or any project that requires a 90° corner to be held in place while assembling. Made from high impact polycarbonate, the Square 90 is strong enough and durable enough for any project. Use any Clamp (sold Separately) to secure the Square 90 while assembling your projects. The Square 90 is available in 4" or 6" size and can be clamped on the inside or outside corner of your work piece making this a very versatile Clamping Square for any project. Achieving 90 degree corners just became a whole lot easier!
›See more product details

×

Square 90

The simple and easy to use Square 90 will become your third hand while assembling cabinets, drawers, boxes or any project that requires a 90° corner to be held in place while assembling. You can use the Square 90 in multiple situations where a 90 degree angle is needed.

Square 90 Positioning Squares

The Square 90 can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more! Made from high impact polycarbonate, the Square 90 is strong and durable enough for any project. It can be clamped on the inside or outside

Standard 90 Degree

Simply clamp the Square 90 Positioning Square to the two pieces you want to be 90 degrees and adjust the square until your set. Secure the square with the two clamps.

All Four Corners

You can never have too many clamps and the same goes for Square 90's. The more you have, the more 90 degree angle projects you can square up at once.

T-Joint Corner

It even does T-joint or offset joint right angles.

Outside 90 Degree

You can use the Square 90's on the inside of a joint or even the outside of a joint!

Close

Features:

• Can be clamped on the inside or outside corner of your work piece.
• Can be used on a standard 90, a t-joint, outside 90 degree, all four corners and more
• Embossed graduation marks on both sides of each square
• Made from high impact polycarbonate

Note: F-Clamps not included.