Bandsaw Accessories

×

Convex Curve Cutter

Create Unique Keepsakes like jewelry boxes, vases, potpourri boxes, small legs, pen holder boxes and much much more. The CCC is truly one of those items where we can say that you are only limited to only your imagination. There are so many things you can create with the CCC that we don’t have enough room to list them. With the Convex Curve Cutter you can make boxes that are 4, 6 or even 8 sides. Not to many jigs or fixtures are this versatile and allow for such variation in project capabilities. Create symmetrical and asymmetrical projects with the CCC. Offset a little, or offset a lot, either way your project is sure to please most everyone that sees it!

Convex Curve Cutter

The CCC is the long awaited addition to the handsaw for easy, unique and accurate convex curves. It easily and quickly attaches to your band saw and it will accurately cut beautiful convex curves to the sides of wooden jewelry boxes, vases, potpourri boxes, small legs, desktop pen holders and more. You are only limited by your imagination. The more you use it, the more ideas you come up with!

Get Creative

For most woodworkers, a priority on their project list is usually to make or build a unique looking jewelry box or keepsake box for that special someone in their life. Wouldn't it be great if you could create a unique curved jewelry box instead of the same old flat sided square box. Achieving a consistent convex curved box was once a very difficult task for woodworkers and cutting them on the handsaw was next to impossible unless you’re the ultimate craftsman. Now with the Convex Curve Cutter (CCC) you can make those type of boxes with ease.

Convex and Concave Boxes

With the Convex Curve Cutter you can make boxes that are 4, 6 or even 8 sides. Not to many jigs or fixtures are this versatile and allow for such variation in project capabilities.

Symmetrical or Asymmetrical

The CCC will not only cut symmetrical curves, it will allow you to cut asymmetrical curves as well. This means you can make boxes that most of us didn’t even think about trying on a band saw before. The CCC comes with all the parts, pieces and full instructions to get you started on your way to making wonderful looking convex curved boxes!

Note: Wooden decorative boxes are display only. Decorative boxes, flower, pen and hardware for wooden decorative boxes not included.

×

F.A.S.T Fence Alignment System Tool

5 Setup Bars

The F.A.S.T is a new take on an old idea. Designed to give you a quick pre set height or thickness gauge for all of your projects. We added a ruler on the front and a rare earth magnet on the back to hold the F.A.S.T in place during set up. The F.A.S.T is made from aluminum and will not damage the teeth of your table saw, bandsaw blade or router bits.

Bandsaw Fence Alignment

For checking alignment, place any F.A.S.T on your band saw blade with the teeth of the blade in the machined groove against the rare earth magnet and adjust your fence so it lines up parallel to the F.A.S.T Bar.

Bandsaw Cut Width

To set for cut width, choose the bar that corresponds to your desired cut width and place on the blade as mentioned above. Gently slide your fence against F.A.S.T Bar and lock your fence in place then remove the F.A.S.T and make the cut.

Also Works with Router Tables, Table Saw and More

Place a F.A.S.T Bar that corresponds to your desired height for setting up your cutters. Simply raise or lower your cutter until it is flush with the top of the F.A.S.T Bar. Works great for a F.A.S.T setting between your table saw fence and blade as well.

Includes:

• 1/8" F.A.S.T Setup Bar
• 3/16" F.A.S.T Setup Bar
• 1/4" F.A.S.T Setup Bar
• 3/8" F.A.S.T Setup Bar
• 1/2" F.A.S.T Setup Bar

×

AccuRight® Miter Mill™

Cross cutting logs and squaring the ends to make bowl blanks with a hand saw is common practice, but if you have ever tried it can be very consuming and difficult to do. With the AccuRight® Miter Mill™ you will be able to effortlessly cross-cut and square your logs to any size you need with your band saw. Simply place your log into the AccuRight® Miter Mill™ and position the log for your desired width you want to cut. Turn your bandsaw on and feed your stock through and make the perfect square cut. It's that easy to cross-cut your logs using the AccuRight® Miter Mill™. Your log is held in place by the heavy gauge steel tooth v-jaws. The front jaw is adjustable to handle logs up to 9" in diameter or larger depending on your bandsaw capacity. The steel miter guide bar is adjustable to fit a standard 3/4" x 3/8" miter slot on your band saw.

×

AccuRight® Log Mill

×

AccuRight® Log Mill

Ever find a piece of wood or a log in your firewood pile that would make a beautiful board or book matched piece of veneer, but you just could not figure out how to cut it. The Carter Log Mill™ is the solution.

AccuRight® Log Mill Features:

• Slice your own wood, veneer or bowl blanks from just about any rough stock or log you have
• A steel guide bar that uses your miter slot to give you the maximum height for re-sawing as well as even, straight cuts
• Heavy duty steel right angle fence keeps the stock from rolling
• Adjust the fence for repetitive cuts

Stretch Your Woodworking Dollars

Adjust the fence for repetitive cuts or once you square off the log you can set up a fence on your saw and slice as many pieces of veneer the log will yield. With wood prices going through the roof, the Carter Log Mill™ will stretch your woodworking dollars by turning that log you were going to burn into your next project.

×

AccuRight™ Circle Cutting Jig

×

AccuRight™ Circle Cutting Jig

The new and improved Carter AccuRight® Circle Cutting Jig quickly and easily attaches to almost any saw, allowing you to cut perfect circles every time. The Carter AccuRight® Circle Cutting Jig allows you to cut any diameter circle up to four feet, when used with proper external support. With the addition of the adjustable side support assembly, the new Circle Cutter now gives your material even more support when cutting.

×

AccuRight® Center Master™ Blank Creation System

×

AccuRight® Center Master™ Blank Creation System

The AccuRight® Center Master™ Blank Creation System makes it possible to easily and consistently cut and mount circular lathe blanks (for bowl turning, hollow form projects, etc.) using the Carter Circle Cutter (sold separately above ). The device allows even thick pieces of wood to be cut into round blanks and makes it possible to mount these blanks precisely centered onto a lathe faceplate, thus minimizing vibration and getting your project off to a quick and safe start. Precisely cutting the blank also allows you to keep scrap to a minimum and use larger scraps of valuable wood for additional projects. The ACCURIGHT® Center Master consists of two parts: a wide sliding pivot plate for use with the ACCURIGHT® Circle Cutter (sold separately); and the Center Master™ faceplate adapter mounting jig to ensure perfect centering of the finished blank. The Center Master™ is thread specific so make sure you order the correct size for your faceplate.