Work Sharp 3000 Wood Tool Sharpener

Work Sharp 3000 Wood Tool Sharpener

Sharpen your tools
quickly and easily

Includes:
• Worksharp 3000 Sharpener
• 2 ea. tempered glass wheels
• 1 ea. slotted wheel
• 1 ea. top tool rest
• 1 ea. crepe tool
• 1 ea. abrasive starter kit

The Work Sharp 3000 Wood Tool Sharpener is the sharpening and honing solution for the discerning woodworker and heavy hobbyist who want sharp tools quickly and easily. The Work Sharp 3000 Wood Tool Sharpener offers 3 ways to sharpen your tools: Top Side with Tool Rest, the Chisel and Plane Iron Port and the Edge-Vision Port. The WS3000 sharpens chisel and plane blades up to 2" wide to a perfect 20°, 25°, 30° or 35° bevel angle without any set up time! It also allows you to sharpen a perfect 5° micro-bevel for even faster re-honing. The Work Sharp 3000 Wood Tool Sharpener also sharpens carving tools, lathe tools, scrapers, putty knives and more! Work Sharp uses a powerful 1/5 hp motor and produces a high torque max wheel speed of 580 RPM. Work Sharp offers an active air cooled sharpening port with routed air flow and heat sink design to quickly and easily sharpen your chisels and flat blades without overheating or damaging the steel.

No. Description
Price
Quantity
10651
Work Sharp 3000 Wood Tool Sharpener
$199.95
Product Divider Image

Work Sharp Accessories

 

WORK SHARP 3000 EDGE-VISION WHEEL

WORK SHARP 3000 EDGE-VISION WHEEL  Image

Innovative Edge-Vision® design makes sharpening carving and lathe tools faster, easier and more precise. Slots in the wheel allow you to "see through" it so you can see the cutting edge while you are sharpening or honing. 150mm wheel is for applying WS3000 specific Slotted Edge-Vision® PSA abrasives. Allows you to expand your Work Sharp's abrasive selection or serves as a direct replacement.

This is designed to fit the Work Sharp WS3000 model only.

Uses:

  • Adhering Slotted PSA abrasives to sharpen and hone tools on the WS3000.

Package Includes:

  • (1) Slotted Edge-Vision® Wheel.
No. Description
Price
Quantity
10656
WORK SHARP 3000 EDGE-VISION WHEEL
$19.95
10661
Edge-Vision Slotted Abrasive Kit
1ea. 80, 2ea. 400, 2ea. 1200 grit discs & 1 ea. 6000 (Micro-Mesh®) discs
$14.95
Product Divider Image

WORK SHARP 3000 GLASS WHEEL

WORK SHARP 3000 GLASS WHEEL  Image

150mm Tempered glass wheel for applying PSA abrasives. Allows you to expand your Work Sharp's abrasive selection or serves as a direct replacement.

This is designed to fit the Work Sharp WS3000 model only.

 Uses:

  • Adhering PSA abrasive to sharpen and hone tools on the WS3000.

 

 Package Includes:

  • (1) Tempered glass disk.
No. Description
Price
Quantity
10657
WORK SHARP 3000 GLASS WHEEL
$19.95
10659
Coarse Abrasive Kit
2ea. 80, 2ea. 120, 3ea. 220 & 2 ea. 400 grit discs
$14.95
10660
Fine Abrasive Kit
4ea. 400, 6ea. 1000 grit discs, 2ea. 1500 - 2" x 2" squares
$14.95
10662
Micro-Mesh Honing Kit
1ea. 3600 & 1ea. 6000 grit Micro-Mesh® discs
$14.95
Product Divider Image

WORK SHARP 3000 LEATHER HONE KIT


Use this leather clad wheel to hone tool edges to razor sharp or to polish and hone a wide range of metal materials. This leather hone kit is designed to fit the Work Sharp WS3000 model only. No tools or special hardware for installation are required.

 Uses:

  • For final polishing and honing tools to a precision edge.

 

Package Includes:

  • (1) Leather pad adhered to tempered glass disk with a PSA adhesive.
  • (1) Leather conditioner
  • (1) Chromium oxide honing compound – 0.5 Micron
No. Description
Price
Quantity
10658
WORK SHARP 3000 LEATHER HONE KIT
$29.95
Product Divider Image

FELT POLISHING WHEEL

FELT POLISHING WHEEL

This medium density felt polishing disk is designed to fit both the Work Sharp WS2000 and WS3000 models. Use this wheel to hone tool edges to razor sharp edges or to polish and hone a wide range of metal materials. All tools and hardware for installation are included.

 Uses:

  • Final polishing and honing tools to a precision edge
  • Light de-burring and polishing tasks on various metals
  • Pliable felt wheel enables it to conform to the polishing task at hand

 Package Includes:

  • (1) Top knob assembly
  • (1) Felt polishing wheel
  • (1) Chromium oxide honing compound – 0.5 Micron
No. Description
Price
Quantity
10663
FELT POLISHING WHEEL
$19.95
Product Divider Image

SURFACE CONDITIONING WHEEL

Non-Woven SURFACE CONDITIONING WHEEL

This medium density non-woven surface conditioning disk is designed to fit both the Work Sharp WS2000 and WS3000 models. Use this wheel to restore rusty / old tools to look new again. Thick woven disk conforms to the task at hand. All tools and hardware for installation are included.

 Uses

  • Remove rust, paint, and other surface coatings
  • Burr removal on metals
  • Surface preparation tasks
  • Light sanding tasks

 

Package Includes:

  • (1) Top knob assembly
  • (1) Medium density non-woven surface conditioning disk
No. Description
Price
Quantity
10664
Non-Woven SURFACE CONDITIONING WHEEL
$14.95
Product Divider Image

Tool Bar Attachment

Tool Bar Attachment

Tool Bar Jig and Accessories

The  Tool Bar Attachment provides a faster, more consistent and repeatable way to sharpen lathe turning tools. It provides Work Sharp owners and lathe turners with more precise and consistent results, even on very complex grind types. Current users of the WS3000 will find that the new Tool Bar Attachment also provides improved freehand sharpening both above and below the grinding wheel. Users of other water based sharpening systems, who may already own an assortment of other manufacturer’s jigs - such as Tormek® or JET® - will find that the WS3000 with Tool Bar Attachment not only accommodates those jigs, but provides a faster way to sharpen without the mess of water or inconvenience of having to maintain a consumable grinding wheel.

The WS3000 Tool Bar Attachment is constructed from cast metal components and a steel tool bar:

  • Sharpens Gouges, Skew Chisels, Parting Tools, Roughing Gouges and Scrapers with ease and repeatability – with addition of Tormek® or JET® sharpening jigs (sold separately).
  • Installs quickly into the T-Slots on the back of any WS3000 and does not interfere with other sharpening operations or functions of the tool.
  • Provides a rigid and stable platform for freehand sharpening or the use of sharpening jigs.
  • Steel tool bar has a durable, black oxide finish for long lasting performance and smooth operation of sharpening jigs.
  • Incorporates a Micro-Adjust feature which provides precise Tool Bar Height positioning for increased precision, repeatability and ease of use.
  • Is fully adjustable and allows for sharpening access to any part of the grinding wheel. This maximizes abrasive life and allows users to control the rate of grinding and heat.
  • Includes a Set Up Fixture which creates consistent and repeatable tool set ups for fast and easy sharpening results. Set Up Fixture provides multiple Tool Stick Out and Tool Bar Height settings for creating different grind angles on various types of lathe turning tools.
No. Description
Price
Quantity
10653
Tool Bar Attachment
$49.95
Product Divider Image

WIDE BLADE ATTACHMENT

WIDE BLADE ATTACHMENT Sharpens and hones flat blades up to 3" wide to any of these angles: 15°, 20°, 25°, 30°, 35°, 40°, 45°, 50° or 60°.  Also allows for sharpening a 1° micro bevel onto your blades from any of the angles listed above. Top table is a precision machined metal casting for optimum flatness and rigidity. Securely mounts to the top of the WS3000 and only requires a one time installation. Honing Guide is cast metal with innovative side clamping design to ensure precision blade alignment and sharpening geometry; including tapered blades like chisels that often move during sharpening in common top clamping honing guides. Honing Guide can also be used on a wet stone or sandpaper on glass to sharpen and hone. Blade Alignment Fixture and bevel angle gauge are included. All tools and hardware for installation are also included. The Wide Blade Attachment is designed for use on the WS3000 only.

Uses

  • Sharpening and honing flat blades up to 3” wide.

Package Includes:

  • (1) Flat Top Table
  • (1) Honing Guide
  • (1) Blade Alignment Fixture
  • (2) Alignment Fixture Pins
  • (1) Detailed set up instructions and User's Guide
  • (1) Tool kit for installation and set up
No. Description
Price
Quantity
10652
WIDE BLADE ATTACHMENT
$69.95
Product Divider Image

Return To Sharpening Index