Ron Brown's best logo
Turners Laser Guide

Universal Mount - Real Time Vessel Thickness Gauge

Turners Laser Guide

The Turners Laser Guide enables you to know the location of a point on the cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. The Turners Laser Guide can be attached to either to the turning tool ferrule or shaft ranging from 3/4" to1-1/4" in diameter. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide can be set to show the position of a cutter or to show the offset to give you the ability to see the wall thickness of your vessel while it is spinning. The Turners Laser Guide comes complete with a laser pointer that uses one AAA battery.

The Turners Laser Guide Includes:

  • 1 each Laser Pointer
  • 1 each Thickness Gauge
  • 1 each Universal Mounting Base
  • 1 each Upright Support Arm
  • 1 each 90° Bi-directional Bracket
  • 1 each Laser Support Arm
  • 1 each Height Stop Ring
  • 1 each AAA Battery


Turners Laser Guide Turners Laser Guide Turners Laser Guide Turners Laser Guide
Item# Description Price Quantity
7386
Ron Brown's Turner's Laser Guide
$79.99

Product Divider Image

Ron Brown's best logo
Steady Rest

Ron Brown's Best

Keep your turning projects from wobbling or potentially breaking off while turning with Ron Brown's Steady Rest. Attach the Steady Rest to any lathe with a split bed or double rail setup. With the unique swing arms, the Steady Rest gives you total control of the placement of the ball bearing wheels. This allows you to keep your project rotating smoothly while hollowing out vessels or turning longer spindle projects.

Configurations

The unique design of the Steady Rest allows you to easily install and adjust for any type of turning project. When the top is opened, you can easily remove your project without having to remove the Steady Rest from the lathe. Configure the Steady Rest using all three wheels to keep your workpeice in place with no wobble. Remove the top from the Steady Rest for working on plates, dishes and more.

Note: Finished wood projects not included.

Ron Brown's Best Ron Brown's Best Ron Brown's Best
No. Description
Price
Quantity
7387
10" - 12 " Ron Brown's Steady Rest
(works with 10" & 12" lathes)
$159.00
7388
16 " Ron Brown's Steady Rest
(works with 16" lathes)
$189.00

Ron Brown's best logo
Turning Mate™
Mobile Turning Tool Caddy

Turning Mate™

Access your lathe turning tools at a moments notice with the Turning Mate™ - the Mobile Turning Tool Caddy. Rubber Tool Pod inserts allow you to store your tools and allow you to see what tool to grab. You can also lay three tools down in the three notches on the caddy tray for even quicker access to your tools. Five swivel casters with brakes allow you to roll the tool caddy into any position that is comfortable for you while turning. The Turning Mate can hold up to 24 Tool Pods. The caddy tray includes 12 soft rubber Tool Pods (6 for large tools and 6 for small tools).

Customize the remaining 12 openings with your choice of small or large Tool Pods sold separately.
Large Pod (for large Tools)
Small Pod  (for small Tools)

Turning Mate™
Turning Mate™
Turning Mate™
Turning Mate™
No. Description
Price
Quantity
7278
Ron Brown's Best Turning Mate™ - Mobile Turning Tool Caddy
$89.99
7279
Small Tool Pods 2 Pack for Turning Mate™
$6.99
7280
Large Tool Pods 2 Pack for Turning Mate™
$6.99
Product Divider Image

Carter Logo
Perfect Sphere™ Tool
Complete System with Riser Stud

Perfect Sphere™ Tool

Have you ever wanted to turn a sphere, but just couldn't get it perfect? Now you can turn that round vase, baseball, basketball or any other sphere shape you can dream up. The patent pending Perfect Sphere™ Tool is a sphere and concave turning system adaptable to most lathes on the market. The heavy duty construction and flexible configuration allow you to turn spheres from 1" to 14" in diameter on most lathes from 10" to 25". A Hunter Tool #4 carbide cutter provided with each system enables the tool a to cut the material versus a standard scraper which provides for a smooth cut and long lasting cutter head. The system comes with an adjustable mounting base that accommodates most lathe bed widths. The only part that is lathe specific is the riser post which is available to fit lathes from 10" to 24/25".

Note: Finished wood projects not included.

Perfect Sphere™ Tool Perfect Sphere™ Tool Perfect Sphere™ Tool Perfect Sphere™ Tool

No. Description
Price
Quantity
4415
Perfect Sphere™ Tool with 10" Riser Stud
$349.95
4416
Perfect Sphere™ Tool with 12" Riser Stud
$349.95
4417
Perfect Sphere™ Tool with 14" Riser Stud
$349.95
4418
Perfect Sphere™ Tool with 16" Riser Stud
$349.95
4419
Perfect Sphere™ Tool with 20" Riser Stud
$349.95
4420
Perfect Sphere™ Tool with 24/25 Riser Stud
$349.95

Product Divider Image

Robert Sorby Logo
Soveriegn System Handles

Soveriegn System Handles


Link to Soveriegn Handle Video

Sovereign handle system for woodturners. Like all other Robert Sorby products it is made in Sheffield to the most exacting engineering standards. Sovereign is the name of the interchangeable handle which comes in three lengths - 12", 16" and 22". The handles are made of aluminum and alloy in combination to give the best of strength, balance and vibration dampening qualities. Each handle comes with a durable Softex grip for extra comfort. Additional knurling provides a further non-slip surface. All three handles will take turning chisels with a 5/8" diameter shaft. Also included are 3/8" and 1/2" collets to accept tools with those diameters thereby allowing the turner to use his Sovereign for a whole host of different chisels.
The Sovereign handles and collet system are ideal for quick change from one tool to another. At the same time they enable the turner to lengthen or shorten the tool length. There a several optional extras with the Sovereign System. While the handles are beautifully balanced some turners like a bit of extra weight for control and hence there is a counterweight to fit both handles. For extra control a side handle is also offered. This can be used either on the side or top of the tool in use. For those requiring an even longer handle there is also a threaded coupler which enables the turner to fit two handles together for extra leverage.

No.
Description
Price
Quantity
11058
12" Sovereign System HandleSOV-12S
Includes 2 Collet Adaptors (SOV-CT and SOV-C10)
$69.99
11059
16" Sovereign System HandleSOV-16S
Includes 2 Collet Adaptors (SOV-C13 and SOV-C10)
$79.99
11060
22" Sovereign System HandleSOV-22S
Includes 2 Collet Adaptors (SOV-C13 and SOV-C10)
$89.99

Product Divider Image

Robert Sorby Logo
Sovereign Collets Adaptors

Sovereign Collets Adaptors

Collet Adaptors are an optional adaptor that's added to Sovereign Handle to allow you to use a variety of Sorby Sovereign Turning Tools.

 

A. 1/4" Collet Adaptor is pilot bored and used with turning tools like some Scrapers, Skews, Parting Tools, Gouges.

 

B. Tang Collet Adaptor allows traditional tanged and flat tools to safely and securely fit into the handle.

No. Description
Price
Quantity
11086
A. Collet Adaptor 1/4" SOV-CO6
$14.99
11087
B. Tang Collet Adaptor SOV-CT
$14.99

Product Divider Image

Robert Sorby Logo
Sovereign Side Handle

Sovereign Side Handle

The Side Handle accessories gives support and control to your Sorby Sovereign Handle. The threaded end simply screws into the threaded opening on the side of the Sovereign handle to maximize command of your tools. Extra control is especially useful for deep hollowing applications. Softex grip dampens vibration and knurled end provides surface grip. The handle is made of aluminum and alloy in combination to give the best of strength, balance and vibration dampening qualities.

Sovereign Side Handle Sovereign Side Handle shown on handle
No. Description
Price
Quantity
11068
Sovereign Side Handle SOV-SH
$16.99

Product Divider Image

Robert Sorby Logo
Sovereign Counter Weight

Sovereign Counter Weight Part of Sorby's brilliant handle and interchangeable tool system that allows turners to mix and match a huge range of accessories and matching tooling for an extreme level of versatility, flexibility, and customization never before seen.

Although the handles are beautifully balanced some turners like a bit of extra weight for even more control. This Counterweight gives turners that option. Fits the 12, 16", and 22" Sovereign handles. Weighs approximately 9-1/2 oz.
Sovereign Counter Weight Sovereign Counter Weight shown in handle
No. Description
Price
Quantity
11088
Sovereign Counter Weight SOV-CW
$12.99

Product Divider Image

Robert Sorby Logo
Sovereign Threaded Coupler

Sovereign Threaded Coupler

This threaded coupler is an accessory for the Robert Sorby Sovereign Turning Handles. The coupler allows any two Sovereign Handles to be joined together end-to-end for increased length and leverage, useful when roughing out very hard woods or when additional reach is needed. The increased weight also helps counterbalance the tool when heavy chisels are installed in the handle.

 

Allows you to achieve a turning handle length of up to 44".

 

Sovereign Threaded Coupler Sovereign Threaded Coupler inner view of handle Sovereign Threaded Coupler shown connected
No. Description
Price
Quantity
11069
Sovereign Threaded Coupler SOV-TC
$14.99

Product Divider Image

Easy Wood Tools Logo
Chip Deflector

Easy Wood Tools - Chip Deflector

When you’re removing lots of material, lots of material comes back at you. You may have become accustomed to piles of shavings on your shoes, all over your clothes and even down your shirt, but you don’t have to turn that way with Easy Wood Tools! Our Lexan® Chip Deflectors simply mount right on your tool to keep the shavings off of you and on the floor where they belong. Chip Deflectors fit all tools except Easy Hollowers #2 and #3.

 

Item# Description Price Quantity
10756
Easy Wood Tools - 3/8" Chip Deflector
$24.99
10757
Easy Wood Tools - 1/2" Chip Deflector
$24.99

Product Divider Image

Easy Wood Tools Logo
Carbide Cutters

Replacement Cutters For Easy Wood Tools.

No.   Description
Price
Quantity
10747
Ci0 Round Carbide Cutter

Ci0 Round Carbide Cutter

  • Replacement cutter for Easy Finisher Full/Pro
  • Round carbide cutter perfect for doing the inside work on smaller bowls
  • Cutting coves on spindle work
  • Inside curves
$17.99
10748
Ci1-SQ Square Carbide Cutter
Ci1-SQ Square Carbide Cutter
  • Replacement cutter for Full and Pro Easy Roughers
  • Square carbide cutter is best choise for when you need a square shoulder cut such as for cutting tenons.
$13.99
10749
Ci1-R 4" Radius Carbide Cutter
Ci1-R4/ 4" Radius Carbide Cutter
  • Replacement cutter for Full and Pro Easy Roughers
  • 4" Radius carbide cutter is best choise for heavy hogging cuts.
  • Out side curves
$13.99
10750
Ci1-R 2" Radius Carbide Cutter
Ci1-R 2" Radius Carbide Cutter
  • Replacement cutter for Full and Pro Easy Roughers
  • 2" Radius carbide cutter is best choise for final passes on outside curves of bowls and spindles.
  • Making pens start to finish
$13.99
10751
Ci2-SQ Square Carbide Cutter
Ci2-SQ Square Carbide Cutter
  • Replacement cutter for Mini and Mid Easy Roughers
  • Square carbide cutter is best choise for when you need a square shoulder cut such as for cutting tenons.

 

$13.99
10752
Ci1-R 2" Radius Carbide Cutter
Ci2-R 2" Radius Carbide Cutter
  • Replacement cutter for Mini and Mid Easy Roughers
  • 2" Radius carbide cutter is best choise for final passes on outside curves of bowls and spindles.
  • Making pens start to finish
$14.99
10753
Ci3-R 2" Round Carbide Cutter
Ci3-R 2" Round Carbide Cutter
  • Replacement cutter for Easy Finisher Mini / Full and Easy Hollowers Full / Pro
  • Round carbide cutter perfect for doing the inside work on smaller bowls
  • Cutting coves on spindle work
  • Inside curves
  • Hollowing
$16.99
10754
Ci4 2" Diamond Carbide Cutter
Ci4 2" Diamond Carbide Cutter
  • Replacement cutter for All Easy Detailers
  • Small beads
  • Small coves
  • Fine detail work
$18.99
10755
Ci5 Round Carbide Cutter
Ci5 Round Carbide Cutter
  • Replacement cutter for Mid-Size Easy Hollowers
  • Round carbide cutter perfect for doing the inside work on smaller bowls
  • Cutting coves on spindle work
  • Inside curves
  • Hollowing
$16.99
 

 

 

Return To Wood Turning Tools Index