Easy Wood Tools 4" Woodturning Chucks

Easy Tools Easy Chuck


The Easy Tools Easy Chuck includes 1-3/8" Dovetail Jaws for gripping 1-3/8" tenons and features an overall expansion of 2". Accessory jaws, sold separately below, allow you to put the Easy Chuck through its paces with a variety of project applications – no more fasteners to worry with.
  • Snap-Lock Technology (SLT™)
  • Change jaws in 30 seconds or less
  • Jaws can be placed in any configuration, no longer sequential
  • No. Description
    Price
    Quantity
    10769
    1" - 8 tpi Easy Chuck C-1000 by EASY WOOD TOOLS
    $399.99
    10777
    1-1/4" - 8 tpi Easy Chuck C-2000 by EASY WOOD TOOLS
    $399.99
    10778
    M33 x3.5 Easy Chuck C-3000 by EASY WOOD TOOLS
    $399.99
    Product Divider Image
     

    Easy Chuck Jaws

    Easy Jaws- When you are ready to grip a different part of your project, you will need to change to a different size or different shape jaw set in order to work safely and have the most fun.

    No. Description
    Grips
    Expands
    TO
    Jaw Length
    Price
    Quantity
    10770
    STOCK - 1-3/8" Dovetail Jaws
    1-3/8"
    2"
    7/16"
    $59.99
    10771
    A - 2-3/8" Dovetail Jaws
    2-3/8"
    3"
    7/16"
    $69.99
    10772
    B - 1/2" Easy Reach Dovetail Jaws
    1/2"
    1-1/4"
    1-1/4"
    $69.99
    10773
    C - 1-3/8" Easy Reach Dovetail Jaws
    1-3/8"
    2"
    1-1/4"
    $69.99
    10774
    D - 3-1/2" Easy Reach Dovetail Jaws
    3-1/2""
    4-1/4"
    1"
    $89.99
    10775
    E - 3-1/2" Easy Reach Dovetail Jaws
    2-1/2", 3",
    3-1/2"
    4-1/4"
    1"
    $89.99
    Product Divider Image

    Longworth Style Lathe Chuck

    Longworth Style Lathe Chuck

    Longworth Style Lathe Chucks are the perfect solution for finishing plates, platters, bowl bottoms and more. The chuck has a unique self centering mechanism that automatically adjust to the size of your project and is easy to secure. A 2-1/4" chuck adaptor is mounted to the back of the Longworth Style Chuck which mounts to a lathe using a 4 jaw standard chuck (#2 or 50mm). This allows you to mount and remove the Longworth Style Chuck quickly and easily. Your project is secured by rubber gripping buttons that provide pliable firm gripping power when tightened. The chuck is made from 1/4" phenol ic plates that give you years of service and performance.

    Please Note: A standard 4 jaw chuck is required for use (Not Included)

    Unique Self Centering Mechanism

    The Longworth Style Chuck grips your project by simply rotating the phenol ic plates. This moves the gripper buttons in or out to the exact position you need. The chuck can grip your project from the outside (outside compression mode) or the inside (inside expansion mode). Once the gripper buttons are firmly up against your project, secure them by tightening the wing nuts.

    Outside
    Compression Mode
    Inside
    Expansion Mode
    Chuck
    Size
    Minimum
    Maximum
     
    Minimum
    Maximum
    10"
    4-1/2"
    8"
     
    5-3/4"
    9-1/2"
    12"
    4-1/2"
    10"
     
    5-3/4"
    11-1/2"
    14"
    4-1/2"
    12"
     
    5-3/4"
    13-1/2"
    16"
    4-1/2"
    14"
     
    5-3/4"
    15-1/2"
    20"
    6-1/2"
    18"
     
    7-3/4"
    19-1/2"
    24"
    6-1/2"
    22"
     
    7-34"
    23-1/2"

    No. Description
    Price
    Quantity
    7365
    10" Longworth Style Lathe Chuck
    $139.99
    7366
    12" Longworth Style Lathe Chuck
    $149.99
    7367
    14" Longworth Style Lathe Chuck
    $179.99
    7368
    16" Longworth Style Lathe Chuck
    $199.99
    7375
    20" Longworth Style Lathe Chuck
    $359.99
    7376
    24" Longworth Style Lathe Chuck
    $389.99
    7369
    8 ea Replacement Gripper Buttons with hardware
    $24.99
    7370
    8 ea Replacement Gripper Buttons only
    $19.99
    Product Divider Image

    Riser Rings for Longworth Chuck

    Great for Plates Platters & Bowls With sharp edged rims.

    The Longworth Chuck is a wonderful device. Our customers love its ease of use, speed of setup and its gentle non-marking grip on their beautiful vessels. They asked for a way to also use their Longworth Chuck when working with knife edged plates or bowls that flared out to a sharp edge. The steel washers at the base of the soft silicone buttons sometimes interfered with the sharp edge on the vessel.

    No. Description
    Price
    Quantity
    7383
    Riser Rings for Longworth Chuck (pack of 8 rings)
    Note: 20" and 24" Longworth Chucks require two sets (16 rings)
    $14.99
    Product Divider Image

    3-1/4" 4 Jaw Woodturning Chuck Deluxe Set

    3-1/4" 4 Jaw Woodturning Chuck Deluxe Set
    The 3-3/4" Ron Brown 4 Jaw Woodturning Chuck Deluxe Set is an easy to use, fully accessorized, key operated self centering lathe chuck system. To operate this chuck, all you need is one hand, as the "T" handle key enables you to tighten the jaws with one hand while your other hand is free to support your work.

    This set includes:

    • 1 ea. 3-3/4" 4 jaw chuck
    • 1 ea. T-handle wrench
    • 1 ea. screw center
    • 1 ea. #1 step jaws
    • 1 ea. #2 round jaws
    • 1 ea. #3 round jaws
    • 1 ea Head stock adaptor
    • 1 ea T-Handle Hex Wrench
    No. Description
    Price
    Quantity
    7342
    Ron Brown' Best 3-1/4" 4 Jaw Woodturning Chuck Deluxe Set
    $189.99
    Product Divider Image

    Ron Brown's Best 4 Jaw Woodturning Chuck

    Ron Brown's Best self centerning 4 jaw woodturning chuck
    This Ron Brown's Best 1-1/4" x 8 TPI self centering 4 jaw woodturning chuck has a wide range of jaw movement and a powerful grip. Jaws expand and grip in a 2" to 3" dovetail recess in the base of your turning. Chuck body is chrome plated to protect against corrosion while jaws are anodized black. Holds round stock between 1-5/8" and 2-3/4" or square billets 1-1/8" to 2-1/8" in size

    This set includes:

    • 1 ea. 4 jaw chuck
    • 1 ea. T-handle wrench
    • 1 ea. screw center
    • 2 ea. locking levers
    • 8 ea. extra screws
    No. Description
    Price
    Quantity
    7343
    Ron Brown's Best 4 Jaw Woodturning Chuck
    $99.99
    7346
    1-1/4" x 8 TPT threaded insert
    $6.99
    7345
    1" x 8 TPI threaded insert
    $6.99
    7344
    3/4" x 16 TPI threaded insert
    $6.99
    Product Divider Image

    Fulton 1/2" Drill Chuck #1MT & #2MT


    The Morse taper drill chuck works on your lathe tail stock. It will allow you to use your lathe like a horizontal drill press. The chuck will hold forstner bits, twist bits and more with shanks up to 1/2" This gives you the ability to bore out many different types of turning projects like vases, pepermills, boxes and more!

    No. Description
    Price
    Quantity

    7373

    1/2" Drill Chuck #1 Morse Taper
    $34.99

    7374

    1/2" Drill Chuck #2 Morse Taper
    $34.99
    Product Divider Image

    Ron Brown's Best MT2 Dowel Chuck

    Ron Brown's Best Dowel Chuck

    Gripping, centering and securing 3/8" & 1/2" diameter dowels and tenons has never been easier. This chuck is perfect for top, bottle stoppers or where ever a small tenon is required for chucking. The Dowel Chuck is mounted to a threaded steel rod which is fed through the opening in your lathe headstock. A star knob is used to easily secure the chuck to your work piece. Work with lathes with a headstock of 13" or less.

    No. Description
    Price
    Quantity
    7378
    3/8" #2 Morse Taper Dowel Chuck
    $19.99
    7379
    1/2" #2 Morse Taper Dowel Chuck
    $19.99
    Product Divider Image

    Easy Wood Tools Spindle Adapter
    1-1/4" x 8 TPI to 1" x 8 TPI


    This Easy Spindle Adapter allows the use of the Easy Chuck on 1-1/4" spindles. Comes with wrench flats and spanner pin holes for easy tightening and removal. Double set screws allow you to run the lathe in reverse for sanding.

    • Easily adapts a 1-1/4" x 8 TPI to a 1" x 8 TPI spindle
    • Double set screws for reverse sanding
    No. Description
    Price
    Quantity
    10776
    Easy Wood Tools Spindle Adapter
    1-1/4" x 8 TPI to 1" x 8 TPI
    $39.99
    Product Divider Image

    Barracuda3 micro Lathe Key Chuck System

    Barracuda3 micro Lathe Key Chuck SystemHere is a full featured and complete key operated scroll chuck system in a small package. The keyed operation allows you to use a single hand to tighten the jaws while you other hand is free to support your work. The chuck is self centering and ideal for small cup projects, miniatures and small spindle work. This premium 4-jaw self-centering chuck system fits mini, midi and micro lathes. With a 2-1/8" body it is an ideal chuck for small projects, cups, miniatures and small spindle work. Adapts to lathes with either 3/4" x 16tpi or 1" x 8tpi. Chuck Weight only 1 lb.

     

    Purchase includes:

    •Mini #2 Round Jaws (pre-mounted)
    •#1 Step Jaws
    •Pin Jaws
    •Allen tightening wrench
    •Tightening Key
    •Adapter for 3/4" x 16tpi (1" x 8tpi standard)
    •Supplied in an attractive blow molded case.


    Type:
    Key Operated
    Compatible Spindle Sizes:
    3/4" x 16tpi, 1" x 8tpi
    Included Jaws:
    Pin,#1,#3
    Pin Jaw Grip:
    Internal: 7/8" to 1-5/8"
    #1 Step jaw gripping:
    External: 1/16 to 13/16", Internal : 5/8 to 1-3/4"
    #2 Standard Jaw gripping:
    External: 3/32" to 1-3/8", Internal: 11/16" to 2-3/8"
    #3 Large Round Jaw Gripping:
    Not Available
    Large Flat Jaw Gripping:
    Not Available
    Small Flat Gripping:
    Not Available
    Category:
    Barracuda 4 Jaw Chucks

    No. Description
    Price
    Quantity
    7046
    Barracuda3 micro Lathe Key Chuck System
    $134.99
    Product Divider Image

    Barracuda 2000C Lathe Chuck System


    Barracuda 2000C Lathe Chuck SystemMaximum Performance
    Our self-centering heavy duty chuck for full-size lathes makes easy work of your heaviest and largest turnings. The geared key mechanism provides a powerful grip capable of holding large diameter work. Designed for lathes with 10" swings or larger. Includes woodworm screw chuck. Weighs 8 lbs with a 4.5" diameter. Comes in a wooden carrying case.


      Includes:
    • #1 Step Jaws
    • #2 Standard Round Jaws
    • #3 Wide Jaws
    • Pin Jaws
    • Screw Chuck adapter
    • Allen wrench, key tightening levers
    • Supplied in an attractive molded plastic case

    Includes adapter to mount to either 3/4" x 16tpi or 1" x 8tpi head stocks.

    Type:
    Lever Operated, "C" Style
    Compatible Spindle Sizes:
    3/4" x 16tpi, 1" x 8tpi
    Included Jaws:
    Pin,#1,#2,#3,Screw Chuck
    Pin Jaw Grip:
    Internal: 1" to 2-1/2"
    #1 Step jaw gripping:
    External: 3/32" to 1-1/2", Internal: 11/16" to 3-1/8"
    #2 Standard Jaw gripping:
    External: 1-1/2" to 2-7/8", Internal: 2" to 3-1/2"
    #3 Large Round Jaw Gripping:
    External: 3-1/16" to 4-1/2"
    Large Flat Jaw Gripping:
    External: up to 8-1/4" - Not Included
    Small Flat Gripping:
    External: up to 5-1/4" - Not Included
    Category:
    Barracuda 4 Jaw Chucks

    No. Description
    Price
    Quantity
    7047
    Barracuda 2000C Lathe Chuck System
    $139.99
    Product Divider Image

    Barracuda2 Lathe Key Chuck System

    Barracuda2 Lathe Key Chuck SystemOne of the easiest to use, best value chucks on the market 
    The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables you to to tighten the jaws with only one hand while your other hand is free to support your work.

     

     


    Key Benefits:

    • Easy to use with one hand operation: The "T" handle key system makes it much easier to use than the lever, non-key chuck systems. 
    • Will give you more turning confidence: Because you only need one hand to tighten the jaws, you can feel more confident and comfortable supporting your work with your free hand. 
    • Powerful grip: to hold your work piece securely.
    • Smooth operation & balance: The Barracuda2 system is precision engineered and machined to provide you smooth operation and minimize vibration at almost any lathe speed.
    • Compatible for most woodturning projects: The variety of included jaw sizes and accessories means the Barracuda2 lathe chuck will mount most turning projects onto your lathe; including bowls, spindles, small turning projects and more.
    • Works with any Mini Lathe, Midi Lathe or Full Sized Lathe.
    • Changing jaws is quick and easy
    • Stout storage case for easy handling and organization: The blow molded plastic case will easily store, organize and secure the complete Barracuda2 Lathe Chuck System.
    • Virtually dust free use: the wood chips and dust clear out of the chuck drive gear with ease.
    Type:
    Key Operated, "C" Style
    Compatible Spindle Sizes:
    3/4" x 16tpi, 1" x 8tpi
    Included Jaws:
    Pin,#1,#2,#3,Screw Chuck
    Pin Jaw Grip:
    Internal: 1" to 2-1/4"
    #1 Step jaw gripping:
    External: 3/32" to 1-3/8", Internal: 11/16" to 2-3/8"
    #2 Standard Jaw gripping:
    External: 1-1/2" to 2-5/8 " , Internal: 2" to 3-3/8"
    #3 Large Round Jaw Gripping:
    External: 3-1/16" to 4-3/8
    Large Flat Jaw Gripping:
    External: up to 8" - Not Included
    Small Flat Gripping:
    External up to 5" - Not Included
    Category:
    Barracuda 4 Jaw Chucks

    No. Description
    Price
    Quantity
    7048
    Barracuda2 Lathe Key Chuck System
    $189.99
    Product Divider Image