Login e-Direct Sign up Cataloge Request Shopping Cart Home Page Home Page Product Index About Us Customer Service Shipping Ordering Retail Store
 

 

Edge Banding Edge Cutter

Perfectly cut the end of your edge banding every time using the unique Edge Banding End Cutter. Once you have your edge banding set, place the End Cutter over the edge and corner of your work piece. Then, press the large handle down to cut the edge banding. The result will be a clean, straight cut that is near perfect every time. The End Cutter also includes two extra cutter knives. Designed to be used with edge banding up to 1/64" thick and as wide as 2-1/8".


Item# Description Price Quantity
4202
Edge Banding Edge Cutter
$24.99

Product Divider Image

Edge Banding Iron

Edge Banding Iron

Apply pre-glued edge banding with ease and accuracy. The non-stick surface of the iron allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base for resting between use. Specially shaped shoe with round edges. 110v with 5-1/2' power cord.

No. Description
Price
Quantity

4198

Edge Banding Iron

$47.99

Product Divider Image

Fast Cap Logo
Edge Banding Trimmer

FastCap Edge Banding Trimmer

With four carbon steel cutting edges in just one tool, FastCap's Quad Trimmer is capable of trimming both edges at once, and does so with either a pushing or pulling motion. The trimmer also easily pulls apart so you can trim one edge at a time, which means you can follow the direction of the grain to minimize tear-out if your edge banding has difficult grain. The two halves of the Quad Trimmer are held together by the friction of two O-rings, which also create a pneumatic spring action. This means there are no metal springs to get lost or broken. Replacement blades are readily available (44653, sold separately) to prolong the life of your edge trimmer. Made in USA.

Details:

  • No springs - all pneumatic.
  • Cuts both faces in one pass.
  • Cuts in both directions.
  • Comfortable ergonomic design.
  • Carbon steel blades hold an extremely sharp edge.
  • Blades are easily replaced with a Phillips screwdriver.
  • Trims veneers and edge banding for materials from 1/2" to 1-1/4" thick in double-edge mode.
  • Trims materials of infinite width when used in single-edge mode.
  • Color may vary.
FastCap Edge Banding Trimmer FastCap Edge Banding Trimmer in action FastCap Edge Banding Trimmer internals
Item# Description Price Quantity
4039
FastCap Edge Banding Trimmer
$19.99

Product Divider Image

Double Edge Banding Trimmer

Double Edge Banding Trimmer

The Double Edge Trimmer makes trimming edge banding quick and easy! In one pass it trims both sides of the of edge banding. With a comfortable and ergonomic design the Double Edge Trimmer trims both sides for a super smooth finish.

No. Description
Price
Quantity

3264

Double Edge Banding Trimmer

$14.99

Product Divider Image

Milescraft Inc. 8403 Laminate Trimmer

Milescraft Inc. 8403 Laminate Trimmer

LaminateTrimmer ™ has a sleek design allowing you close control when trimming away laminate, edge banding and veneer. In addition to straight edges, the LaminateTrimmer works well on round surfaces too. No matter the size of your hands, the Laminate Trimmer ™ has a great fit, giving you full control of the trimmer. The LaminateTrimmer ™ uses a standard razor blade making for easy replacement. No specialty blades required! The versatile design of the LaminateTrimmer™ allows you to use the tool from both sides.

Milescraft Inc. 8403 Laminate Trimmer Milescraft Inc. 8403 Laminate Trimmer action shot 1 Milescraft Inc. 8403 Laminate Trimmer action shot 2
Item# Description Price Quantity
10147
Milescraft Inc. 8403 Laminate Trimmer
$5.99

Product Divider Image

Veneer Scraper


This scraper is designed for applying paper backed veneer with contact cement, Flex-Pro adhesive, and PSA backed veneers. This is a simple tool but it works wonders. It uses a basic but powerful concept in which hand/arm force is used to concentrate pressure at the tip of the tool to achieve an excellent bond between the substrate and the paper backed veneer. This tool/method creates a stronger surface contact than an ordinary roller.

 

 

No. Description
Price
Quantity

10246

Veneer Scraper

$15.99

Product Divider Image

Edge Banding Roller

Edge Banding Roller

This edge banding roller is the perfect size for applying edge banding.The roller is made from solid hardwood and measures 1-1/2” wide x 1-3/8” diameter with a 3-3/4” long handle. Hole drilled through the handle fo hanging.

Always start in the center and roll in all directions to roll out any air bubbles and press the veneer down

No. Description
Price
Quantity

10247

Edge Banding Roller

$5.99

Product Divider Image

Veneer Splicing Tape


Getting a perfect join between two sheets of veneer requires both sheets to stay exactly where they are placed during the clamping process. Not as easy as it sounds. Veneer splicing tape holds both sections together until the glue has dried for a flawless result. 2-Hole Splicing Tape features series of holes allowing the join to remain visible underneath and these holes also allow the veneer glue to set without retaining moisture on the surface of the veneer. To use, tear off the amount required, moisten to activate the gum and apply to the veneer. This 3/4" wide tape comes in a generous 650ft roll.

No. Description
Price
Quantity

10221

Veneer Splicing Tape 2-Hole     3/4" x 650' Rolls

$9.99

10222

Veneer Splicing Tape No Hole   3/4" x 650' Rolls

$9.99
Product Divider Image

Laminate J Roller

Laminate J Roller

The “J” roller allows you to apply smooth and even pressure on the most difficult laminates and veneers. This “J” Roller features a 1-1/2” dia. x 3”
wide non-marring rubber roller with a 10” long handle with 2 vinyl grips.

 

No. Description
Price
Quantity

2212

Laminate J Roller

$12.99

Product Divider Image

Pro-Glue™ Veneer Softener

Pro-Glue™ Veneer Softener

PRO-GLUE VENEER SOFTENER is “ready to use” and has been specifically formulated to aid in flattening and making the raw veneer more flexible for better conformity and adhesion. Softens and flattens brittle, buckled or curved veneers to allow for easy use of the veneer. This is extremely important when working with burls, crotches, curled and veneers that are too dry and fragile that are traditionally difficult to work with even under pressure. Softening veneers is especially effective on burls and crotch veneers. PRO-GLUE VENEER SOFTENER is perfect for use on raw wood veneers and can be applied using the Spray bottle or with as a brush on application. PRO-GLUE VENEER SOFTENER produces virtually no odors.

No. Description
Price
Quantity

10707

Pro-Glue™ Veneer Softener 16 oz. pump bottle

$8.99

10708

Pro-Glue™ Veneer Softener 1 gt. trigger spray bottle

$14.99

Product Divider Image
Previous Page