This taper jig will allow you to make one the most difficult table saw cuts much easier!The Dubby Taper Jig not only works well, it's simple in design and simple to use. Constructed of 5/8" MDF composite material, the platform is designed to lay flat and true on your table saw for precise cuts. The melamine surface on both top and bottom provide a smooth run from start to finish. An aluminum anodized extruded fence allows for adjustments up to 12" wide. When using the taper jig you will simply mark your stock at each end for you desired widths you want the wood to be cut to. Place the stock on top of the platform, and adjust the fence accordingly. It's that simple. Better yet, the jig comes with two completely adjustable, heavy duty hold down clamps to keep the stock in place during the cutting process and it also includes a handy stop device for repetitive cuts.
NOTE: DOES NOT FIT JET SUPER SAWS OR SHOPSMITH SAWS
Cross Cut Drop Off Platform
For use with the Dubby Cut Off Sled, the Drop off sled provides you with a platform or zero clearance when making your cross-cuts with the Dubby sled. The Drop-off sled keeps your stock at the same level as the Cut-off sled to help prevent any accidental drop-off after the cut, keeping the off piece away from the tablesaw blade. This unit is designed to be used only with the Dubby Cut-off Sled.
Cutting-egde Tapers. The PRECISION, SAFETY, and CONTROL of the MICRODIAL Tapering Jig advances your woodworking with ease. Cut tapers with surgical precision using the intuitive COLORMATCH system. Enjoy hassle-free adjustments between repeat cuts with built-in MEMORYLOCK technology. Revolutionize your results with the most precise, versatile tapering jig on the market.
MICRODIAL Taper Jig with One 200 Advanced Micro Jig Gripper
Table Saw Taper Jig
When you need to make that slightly angled cut that is to long for your miter or chop saw, use the taper jig to make the job easier. Constructed of aluminum , this taper jig includes a built-in scale and is fully adjustable. Also has a backside stop to hold wood in place. It may be assembled for either left or right hand use. Use it with your rip fence to cut tapers up to 15 degrees (this is a 3” taper per foot). Overall length is a generous 24”