Micro Jig Logo
Grr-Ripper® 100 Basic Model

Precision • Safety • Control

The GRR-Ripper is not some simple push block. The GRR-Ripper is a unique precision guidance and stock control system designed to feed your wood through your table saw blade with far more safety and accuracy than could ever be possible with bare hands and conventional push blocks. With the GRR-Ripper's 3-directional control, you can safely exert downward, forward, and lateral pressure on the stock for maximum control and safety down to 1/4" cuts. You will enjoy improved accuracy, less wasted materials and a new ease in completing projects. All this is possible with a level of safety far beyond that of simple notched sticks or their bargain-bin substitutes.

Best of all, GRR-Ripper's patented design eliminates any need for bare-hand feeding. Rather than acting as a saw guard that is affixed to the back of the table saw, or that hovers above it, the GRR-Ripper not only firmly holds your stock but serves as a movable saw guard, traveling with your hands as a rugged barricade protecting them from the blade. Maximizing the use of your materials no longer has to compromise your safety, and remember too, this safety factor comes with the huge bonus of truly better cuts. Seeing is believing. See GRR-Ripper in action on the video at the top of this page.

2pk comes with Free Instructional DVD that features over 30 advanced techniques.

Note:
Use 2 grippers for more control on longer or wider stock keeping both hands out of harms way.


Grippers can be used with:

  • Tablesaw
  • Router Table
  • Bandsaw
  • Jointer
Item# Description Price Quantity
1367
Gripper® Basic Model - GR-100
$59.00
1370
Gripper® Basic Model - Two Pack
with Free Instructional DVD
$109.00

Product Divider Image

Micro Jig Logo
Grr-Ripper® 200 Advanced Model

Sili-Stik

The Gripper 200 model is the advanced model. It comes with the same great features as the basic model, plus it includes to advanced accessories that control larger material and thicker stock. First feature is an extra leg that can be used to give you extra gripping power for wider stock pieces and the second features is the large leveling pad. This pad is primarily used to level your Gripper when cutting small, narrow pieces, plus is as an hook on inside corner for extra gripping power. Buy a second Gripper so when you have to cut anything longer than 16 inches you have a second Grr-Ripper on hand so you can “daisy chain” your stock through the cutter or blade in a safe and controlled manner.

2pk comes with Free Instructional DVD that features over 30 advanced techniques.

Item# Description Price Quantity
1368
Grr-Ripper® 200 Advanced Model GR-200
$79.99
1371
Grr-Ripper® 200 Two Pack 
with FREE instructional DVD
$149.00

Product Divider Image




Accessories for Gripper® Push Block Systems



Micro Jig Logo
Gripper Upgrade Kit

Upgrade your Gripper® 100 to Gripper® 200 Advanced Model.

You love our standard model GRR-Ripper (GR-100), but you're ready for an upgrade. You're ready to take your woodworking to the next level. With the Upgrade kit, you will turn your basic GRR-Ripper to the Advanced Model GRR-Ripper (GR-200). The Advanced Model GRR-Ripper is the ultimate woodshop companion; keeping you safe while giving you the accuracy to produce the exact cut you want. Are you ready for the next level?

Includes:

  • 1ea. Stabalizer Plate
  • 1ea. Adjustable Spacer
  • All hardware needed.
Item# Description Price Quantity
1373
Gripper® Basic Model Upgrade Kit - GRAK-404
$22.99

Product Divider Image

Micro Jig Logo
Grr-Ripper® Gravity Heel Kit

Grr-Ripper® Gravity Heel

The Grr-Ripper®, Gravity Heel is a spring loaded lever that attaches to the back of your Grr-Ripper® and provides extra leverage on your stock by dropping down behind the stock to help push it thru your cut. The Grr-Ripper Gravity Heel can also be used on the router table as backing block to prevent blow out for coping operation, stock can be horizontal or vertical (Grr-Ripper lays on its side). The CUT-Through Gravity Heel can be used as a setup template for future use of the same router bit.

Grr-Ripper® Gravity Heel can be used with:

  • Tablesaw
  • Router Table
  • Joiner
  • Bandsaw
Grr-Ripper® Gravity Heel Grr-Ripper® Gravity Heel Grr-Ripper® Gravity Heel Grr-Ripper® Gravity Heel

Includes:

  • 2 ea. Heel Spacers - GRP-41
  • 2 ea. 3/4" Gravity Heel - GRP-42
  • 3 ea. 1" Gravity Heel - GRP-43
  • 2 ea. 1/4" x 20 Thumb Knob - GR-H13
  • 2 ea. Nylon Shoulder Washer - GR-H14
  • 2 ea. Compression Spring - TJ-H2
  • 2 ea. 1/4" x 20 by 1-3/4" T-Bolt - GR-H12
Item# Description Price Quantity
4055
Grr-Ripper® Gravity Heel Kit
$24.99

Product Divider Image

Micro Jig Logo
Grr-Ripper® Gravity Heel Replacements

Replacement Heels for the Grr-Ripper® Gravity Heel Kit. Use extra heels for more profiles for your router bits or tablesaw. You can use these heels like a zero clearance for different router bits profile to help prevent blowout on the backside of your cut.

Includes:

  • 2 ea. 3/4" Gravity Heel - GRP-42
  • 3 ea. 1" Gravity Heel - GRP-43
Item# Description Price Quantity
4056
Grr-Ripper® Gravity Heel Replacements
$14.99

Product Divider Image

Micro Jig Logo
Handle Bridge Set

Microjig Handle Bridge Set

With the arch shaped MJ Handle Bridge attached, the downward pressure from the handle is spread across the whole width of the GRR-Riper® body through the FOUR contacting points (two from each bridge) instead of through the two mating points directly under the handle without the bridge.  Because of the MJ Bridge Handle enhances the distribution of balanced pressure throughout the GRR-Ripper®, the need of location adjustments of the handle is virtually eliminated. This arch shaped handle will distribute downward pressure to cover entire width of the Grr-Ripper® by 4 contact points. This virtually eliminates the need to adjust the handle on the Grr-Ripper® and significantly improves control by distributing more control throughout the non-slip surface.

Also included with the Bridge Set is the Trailing Hook.
The easy on/off Trailing Hook allows you to secure your stock even more by dropping behind the work piece to help push your stock thru. Good for thicker stock.

 

link toMicro Jig Handle bridge Set video

Microjig Handle Bridge Set Microjig Handle Bridge Set
Item# Description Price Quantity
1381
Microjig Handle Bridge Set
$12.99

Product Divider Image

Micro Jig Logo
MJ Deflector/Connector

MJ Deflector/Connector

The MJ Deflector/Connector (D/C) is designed to enhance the user experience of the GRR-Ripper® System. The D/C can be used for chip/dust deflection. It can also serve as a connecting bridge between two GRR-Rippers®, where it allows for multiple configurations when used on the table saw, router table, and shaper. When the D/C is installed behind a GRR-Ripper®, it also serves as a blade cover when exiting the cut on the table saw. 

Note: 
The MJ Handle Bridge Set (Model # GRHB-010) must be installed on your GRR-Ripper® (Model # GR-100 or GR-200) prior to installing the MJ D/C.

 

 


link to deflector video

MJ Deflector/Connector MJ Deflector/Connector MJ Deflector/Connector MJ Deflector/Connector
Item# Description Price Quantity
1382
MJ Deflector/Connector
$12.99

Product Divider Image

Micro Jig Logo
Grr-Ripper® Bridge Set and Deflector / Connector Combo Package

Connector / Deflector and Bridge Set Package

Microjig Handle Bridge Set and Deflector/Connector Package,

Includes:

  • #1381 Microjig Handle Bridge Set
  • #1382 MJ Deflector/Connector
Connector / Deflector and Bridge Set Package Connector / Deflector and Bridge Set Package Connector / Deflector and Bridge Set Package Connector / Deflector and Bridge Set Package
Item# Description Price Quantity
1383
Connector / Deflector and Bridge Set Package
$22.99

Product Divider Image

Micro Jig Logo
Grr-Ripper® 1/8" Leg

1/8" Leg Attachment for Thin Stock

Cutting small pieces on the table saw just got safer, faster and much easier. Make consistent and precise accurate 1/8" cuts safely and every time with the GRR-Ripper® without moving the fence. Just remove the the exiting 1/4" leg from the Grr-Ripper® and replace it with the 1/8" leg. Now you can cut those 1/8" strips on the inside of the blade and not have to stop stop to reset the tablesaw fence in those 1/8" increments each cut.

 

 

 

 




Video link to 1/8" Gripper leg

1/8" Leg Attachment for Thin Stock 1/8" Leg Attachment for Thin Stock 1/8" Leg Attachment for Thin Stock 1/8" Leg Attachment for Thin Stock
Item# Description Price Quantity
3364
1/8" Leg Attachment for Thin Stock
$14.99

Product Divider Image

Micro Jig Logo
Gripper® Replacement Legs

#3258 & #3259
(Yellow)   (Black)
1" Center Leg

#3256 & #3257
(Yellow)   (Black)
1/2" Leg

#3260 & #3261
(Yellow)   (Black)
1/4" Leg

Item# Description Price Quantity
3256
1/2" Leg (Yellow) - GRP-4Y
$14.95
3257
1/2" Leg (Black) - GRP-4B
$14.95
3258
1" Center Leg (Yellow) - GRP-3Y
$15.95
3259
1" Center Leg (Black) - GRP-3B
$15.95
3260
1/4" Leg (Yellow) - GRP-5Y
$14.95
3261
1/4" Leg (Black) - GRP-5B
$14.95

Product Divider Image

Micro Jig Logo
Grr-Ripper Instructional DVD

Gripper Instructional DVD

This two hour feature-packed video covers over 30 applications of the GRR-Ripper® System on four different  machines.  The following photo galleries preview the contents in the DVD.  For your convenience and ease of navigation, we have created five different galleries to cover each individual professional, each on their own separate page  for shorter loading time.

Item# Description Price Quantity
1374
Grr-Ripper Instructional DVD
$9.99

Product Divider Image

Return to Tablesaw Accessories Index