Now you can create your very own unique United States coin displays with your router and this new Coin Template. Take two double sided pieces of tape or two C-clamps and secure the  3/8”  thick acrylic template to your work piece. Use a 1/4" dia. down-cut spiral bit and a 3/8" O.D. guide template bushing to rout the proper sized holes for penny, nickel, dime, quarter, half dollar and dollar U.S. coins. Each of the coin openings is laser cut with alignment cross hairs that allows you to align your coins virtually anywhere on your project piece. Simply make your marks on the wood, then line-up the cross hairs to the marks, a perfect line every time! The 3/8" router bit guide bushing and the 1/4" diameter down cut spiral bit are NOT included with the template.  

Our complete Hinge Mortise Jig System accurately create a variety of hinge mortises with this easy-to-use jig. Install butt hinges of all sizes with the standard jig. It's simple to operate, and the durable aluminum construction will provide years of reliable help in the shop. The system includes a custom pattern router bit, and complete instructions. No insert is required for routing butt hinges.

The perfect tool for centering, aligning and making accurate mortise cut's every time. The router mortising plate allows you to make mortise cuts in stock up to 41/2" wide. Two metal guide rollers are adjustable and are to be set-up to ride firmly against the stock on both sides to prevent any movement of the router. The guide block can be maneuvered anywhere within the semi-circle slot for stability when cutting. The plate also includes a guide pinpoint, which works with a pencil for marking the center of the stock (B).

Extra Router Safety Made Simple!
Capture larger parts between dual fences on this large size coping sled. The secondary control handle provides extra control while performing end grain rail cuts.

1. The 500 lb clamp holds your work piece securely between the dual fences.
2. A friction strip resists part movement during routing.
3. The ergonomically designed primary handle provides comfort and gives excellent control of the sled as you push it past the cutter.
4. A replaceable backer block prevents blow out as the cutter exits the wood.
5. Excellent for holding small parts requiring routed edges.
6. Polyethylene and acrylic construction for durability and rigidity.

No more searching through stacks of templates to find just the right size circle for your project. This template has 12 of the most common size circles pre-milled into a durable 3/8" thick acrylic sheet. Each size circle is clearly labeled for quick and easy identification. This template is designed to be used with a 5/8" short shank template guide bushing (not included).

Get Jig and Template Double Stick Tape Here

Still trying to free-hand radii on your projects? With this template set you can cut a perfect radius with your router table and flush trim bits. The 3 templates cover radius sizes from 1/8" to 1" in 1/8" increments, while the clear acrylic plates allows you to see exactly what you are doing. Also, the adjustable and moveable steel index pins align the template exactly on your project and stabilize the template on your work piece for safe cutting of the stock.

Get Jig and Template Double Stick Tape Here

Impress friends, and family at your next get together with a unique serving tray or bowl that you made with your router. Make beautiful looking divided bowls or trays with your own distinctive and custom look. This kit comes with 5 different templates, which allows you to make up to 10 different styles of bowls or trays. From the classic divided circle template to the elliptical serving tray template, you are sure to find the perfect template to make a bowl or tray for any occasion. Home made Bowls and trays make great keepsakes and even better gifts! Making bowls and trays with this technique is simple, you provide the router and the stock, we provide the rest. Kit includes 1 dish cutting router bit (1/2" shank), 1 router bit collet extender (1/2" shank) for extra deep routing and 5 different MDF templates

Get Jig and Template Double Stick Tape Here

Create that custom look for your cabinet doors with the Panel Master PRO™ System. Two heavy duty steel handles attach directly to the new 24" PRO-GRIP™ 180° straight edge clamp. This unique system provides you with a rock solid platform to hold your templates to the top of the clamp while your stock is secure in the bottom of the clamp. Use the system for panels and rails or even use it for small parts that need to be routed, keeping your hands away from the cutters. The 180° straight edge clamp has an adjustable handle which rotates so that it doesn't interfere with the table top while running your stock through the router. Available in three different panel styles, choose one or maybe all three may do the trick. The Panel Master-PRO™

System includes:

• 2 Ea. heavy duty steel handles
• 1 Ea. 90° squaring head
• 1 Ea. 24" PRO-GRIP™180° straight edge clamp
• One ten piece template set, which will do your panel
  as well as your rail profiles from 10" to 19" wide.
  
  Note: designed to be used on router tables only.

Use your router and bushing guide to create unique lettered or numbered signs. A built in spacing system makes alignment of letters or numbers very quick and simple. The set includes letters or numbers in 1-1/2" and 2-1/2"sizes. This template set will work on stock from 4" to 12" wide. Router, bit, bushing and router not included.

Inlays in your project can bring your finished piece to a whole new creative level. Made from tough shatter resistant PVC material for long life. Each template gives your router a stable, flat surface to run on, while your spiral bit and inlay bushing guide (not included) allow you to cut the inlay and recess with the same template. There are 14 different templates to choose from. Purchase them individually or in a complete 14 pc set. Don't forget to get your brass inlay kit, which comes with a 1/8” carbide spiral bit, bushing guide, and a centering pin.

Get Jig and Template Double Stick Tape Here

This classic style inlay design (also known as Bow- Tie) works great for everything from decorative touches to your project to reinforcement of joints. Designed to work with our brass inlay kit, these two template sets contain butterfly inlay templates of varying sizes. The large butterfly template has 3 inlay templates ranging in length from 35/32" to 43/4". The small butterfly template has 4 inlay templates ranging in length from 111/16" up to 21/2". Don't forget to get your brass inlay kit, which comes with a 1/8” carbide spiral bit, bushing, template guide, and a centering pin. The brass inlay kit is sold separately.

Get Jig and Template Double Stick Tape Here

Our router compass will allow you to cut perfect circles, perfect arcs, and radius corners for large or small tabletops, lazy susans and wheels with your router. The router compass will also cut circular grooves in your stock ranging from 8'' to 48'' in diameter. A steel point provides secure pivoting and adjusts quickly with a locking knob. The knob moves through out the center of the router compass to allow you to make virtually any size cut up to 48". The router compass is made from a clear acrylic plastic to see where you are routing and it also has clearly labeled measurements that are easy to read.

Hang your framed photo’s, portraits or most anything you need to affix to your wall easily and precisely with our New keyhole slot cutting template. No measuring needed with this template, simply line up the template on your picture frame and rout out your slot(s). The template has 6 different size slots to choose from depending on the size of your project and is made from clear acrylic to see exactly what you are cutting. Use this template with a 5/8" Short-Shank Guide Bushing, (specifically designed for 1/4" template stock) and a 3/8" Keyhole Slot Router Bit. The router bit and guide bushing are not included with this template.

Get Jig and Template Double Stick Tape Here

Use Double Stick Tape to hold your jig and templates in place when routing. For best results, always make sure that your work surface areas are clean and free of dust and debris before placing tape on the jig, template and work piece. After you attach the jig or template to the work piece with Double Stick Tape you will need to temporally clamp the parts together for an extra secure bond. Always remember to tug or push on the jig or template once it is installed to make sure you have a secure bond before routing.