This exploded shop drawng shows how to build a miter saw fence extension to fit any popluar miter / chop saw. Expand on this clever fence extension to build a custom miter saw fence extension that works best for your saw and your shop.

Build a 8’ or 16’ system, whatever fits your shop needs. This fence kit will allow you to
make accurate and repetitive cuts. With a simple turn of the knob on the stop block,
(included) you can lock the block in place for specific length cuts. The track on the top of the fence will accept any standard 3/8” hex head bolt, which will allow you to
use any home made jig or fixture.

The Kreg® Precision Flip stop easily sets the distance between the end of the board and the saw blade for amazing cutting accuracy and repeatability. Curved front design lifts out of the way to bypass the stop to square the end of your stock piece. Adjustable alignment lens (cursor) assures pinpoint accuracy when aligning the Precision Flipstop. Perfect for the miter saw, drill press, tablesaw, and more. Attaches to T-trak in fence with 1/4" hex bolt (included).

The Perfect Miter attachment to the Kreg® stops references a 45 degree mitered board on two surfaces, greatly increasing the cutting accuracy and repeatability of the miter chop saw. Perfect for picture framers and any woodworker who desires tight fitting mitered joints. The Kreg perfect miter attachment secures to both the Kreg® Flipstop and Kreg® Production Stop with a single bolt and is reversible for toe-in or toe-out miter cutting. Knob and bolt are included.

The “Rock Solid” Kreg® Production stop sets the distance from the end of the board and the saw blade for amazing cutting accuracy and cutting repeatability. The Kreg® Production Stop is perfect for repetitive, high-production applications. A unique dovetail design drops onto the top of the fence, which means there is no need to disassemble to move the stop to the other side of the blade. The dual, adjustable precision lens’ (cursors) reads from either side of the sawblade. The precision lens' are marked with a red hair line for easy visibility when aligning.

Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of longer piece prior to final cut to length. Requires a minimum fence height of 2-5/16". Fits T-track accepting 7/16 width fasteners (1/4" bolt size) for the Mini T-track and 1/2" width fasteners( 3/8" bolt size) for Heavy Duty T-track.

This Quick Release Miter Saw Stand works with all brands of miter saws and makes setting up and tearing down a breeze. Right and left work supports are adjustable for both height and length that allow for adjusting the work supports to match the saw bed height and work with extra long stock. The Quick Release Miter Saw Stand legs provide superior support for full time use and fold for easy storage. This stand works has a everyday miter saw workstation in the shop and for the woodworker on the go, the perfect job site solution.

Once the miter saw is mounted to the Quick Release Miter Saw Stand Mounting Brackets, you can easily move the miter saw back and fourth from any work surface with out re-mounting the Quick Release mounting brackets. The mounting brackets have rubber feet to keep the saw in place and not mar your work surface.

• Heavy duty miter saw stand with quick release mounting brackets so you can easily mount and remove your miter saw from the stand
• Quick folding design makes storing and transporting easy
• Heavy duty steel construction
• Accommodates most 10-inch miter saws, not recommended for 12-inch sliding miter saws or larger
• Tool-less height adjustability of material supports; working size: 41 - 112-Inches (wide) & 35-1/2 - 39-1/2-Inches (height)
• Quick Release Mounting Brackets allow saw to go from stand to workbench and back with out re-mounting the saw.

• Measures 16" x 13"
• 4" Dust Port
• 10 1/2" Deep

The quickest and easiest way to clamp mitered corners! Great for moldings and trim. Simply choose the appropriate size spring clamp and use the spreader to open and position the clamp.

Kit includes:

Set your Crown-Pro™ to match your spring angle and your saw to match the wall angle.

Angle-Finder Included

This uniquely designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts.

Find Your Angle: Use the included Angle Finder to determine the correct spring angle and wall angle. Set Your Angle: Set your Crown-Pro™ to match your spring angle and your saw to match the wall angle.
Position Your Saw: Position your Crown-Pro™ on either side of your saw based on the type of joint, and make cut. Cut and Hang: Position your crown correctly on the wall and nail it securely into position.

• No Compound Cuts Required
• Eliminates Coping of Joints
• Angle-Finder Included
• Curved Design For Any Spring Angle
• Works with Crown up to 5-1/2" Tall
• Works for Inside and Outside Corners

The Milescraft 1405 Crown45 crown molding jig for miter saws will change the way crown molding projects are done. With its innovative “right-side up” cutting orientation, novice and pro alike can save time and money by cutting the stock correctly, the first time. Gone are the days of thinking upside down and backwards, with this jig the crown molding will be cut the way you see and install it on the wall. Use the included angle finders to determine the spring angle of your molding, adjust the Crown45 to the appropriate angle, and you are ready to cut! An indented cutting surface allows for special dentil styled moldings and a collapsible design allows for compact storage.

The Milescraft 8401 Trim45 Trim Carpentry Aid is the handiest tool in the toolbox when it comes to installing door and window casement trim as well as decorative trim work projects such as fireplaces or book shelves. Unique to the Trim45 is an adjustable reveal setting allowing it to be used on any project in any home or at any job site adding versatility and usability. Stick pins, tape measure slots, and rare earth magnets make accurate installation of even the largest windows a one person job. Other uses include a built in miter gauge for marking 45 degree angles, a built in square for marking 90 degree angles or setting miter blades, and tape measure slots allow marking straight lines at the depth of the set reveal.