Hose clamps are a simple but necessary accessory for all dust collections
systems. Expand the clamp to a large enough size to fit around the
hose, then place hose onto the particular fitting then secure with
a screw driver, socket or thumb screw. Wall hangers keep your dust
collection hose secure to the wall or ceiling and from under foot.
X-Treme Tape Wrap
Stop leaks from gaps caused by hose clamps or better yet replace hose clamps altogether with X-Treme Tape. You can join hose to hose, hose to fitting or fitting to fitting with out the use of clamps. X-Treme Tape is great for repairing punctures in all typed of dust collection hose. X-Treme Tape is gray in color and comes 1-1/2" wide x 25' long.
X-Treme Tape Wrap Roll 1-1/2" W x 25'L
Steel Hose Clamp with Thumb Screw
There is no need for a flat
head screw driver with these hose clamps. The thumbscrew feature
makes it easy to secure these clamps to your hose and fittings. Simply loosen clamp by turning counter clockwise,
place around your hose, and then, place hose on fitting and secure.
2 1/2" Steel Hose Clamp with Thumb Screw
4" Steel Hose Clamp with Thumb Screw
Wire Hose Clamps
Wire hose clamps work much in
the same way as the steel hose clamps. The difference
being they grab around the grooves of the hose to form secure grip around the fitting
or port hole. They secure down with a screw driver or a
2 1/2" Wire Hose Clamp
3" Wire Hose Clamp
4" Wire Hose Clamp
Steel Hose Clamps
Hose clamps are a simple but
necessary accessory for all dust collections systems. Expand
the clamp to a large enough size to fit around the hose,
then place hose onto the particular fitting then secure
with a screw driver or socket.
2 1/2" Steel Hose Clamps
3" Steel Hose Clamps
4" Steel Hose Clamps
EZ Release Hose Clamps
No more scraping or busting knuckles to attach your hose to your dust collection fittings. The EZ Release Hose Clamps are designed to create strong spring like pressure on the hose when released. Simply squeeze the EZ Release Hose Clamp, place around your hose, and then attach to your dust collection port or fitting. These clamps are available in twoconvenient sizes and are sold individually.
2-1/2" EZ Release Hose Clamps
4" EZ Release Hose Clamps
Step Over Hose Clamp
No more digging or cutting into your dust collection hose with the NEW Step Over hose clamps. Unlike standard steel hose clamps, the unique design of these hose clamps allows the steel bands to actually "step" over the top of the hose wire (in clear PVC type hose) and applies pressure where it is needed. This will keep your fittings more secure and won't damage your hose. The clamp is equipped with a plastic turnkey for easy tightening and loosening of the clamp. The Step Over hose clamp works great with Peachtree's PVC clear hose and is available in two sizes: 21/2" and 4".
2-1/2" Step Over Hose Clamp
4" Step Over Hose Clamp
Dust Collection Hose Wall Hangers
Use a hose hanger to run your
dust collection hose line throughout your shop. They fasten
to just about any spot on your wall or ceiling simply by driving screws through
the flaps on the ends of the hangers. (screws not included).