Y Connectors are used to attach branch lines to service more than one machine at at a time. This design provides increased lateral air flow and efficiency over other types of fittings. Hose clamps are required for proper connection.

The 4 to 2½” -Y- connector is used simply to branch off your dust collection line just like a standard “Y” connector, only this connector reduces your branch off down to 2½” . Hose
clamps are required for proper connection.

Elbow Connectors eliminates binding or kinking in the hose when you bend your hose at a 90° angle. Place the Elbow connector in the corners of your dust collection line to
prevent kinks. Hose clamps are required for proper connection.

Elbow Connectors eliminates binding or kinking in the hose when you bend your hose at a 45° angle. Place the Elbow connector in the corners of your dust collection line to
prevent kinks. Hose clamps are required for proper connection.

T- Connectors provide the option of adding branches to system to service each machine in a shop. T’s are very helpful when space or design constraints prohibit the use of Y’s
and other fitting types. Hose clamps are required for proper connection.

Use this 2-1/2" Union Fitting to connect two hard fitting together. Can be used with Y's, T's, Elbows and Splices.

Sample Use: