Clamps & Accessories

Large Work Bench Holdfast

With a large holding pad and an extra long reach,the Fulton work bench holdfast is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. The Large Fulton holdfast is made from solid ductile iron for extended shop use and has a 7" throat, 7/8” round shank and it measures 16-1/2” in total length.
›See more product details

×

Large Work Bench Holdfast

With a large holding pad and an extra long reach,the Fulton work bench holdfast is the ideal tool for applications where you need to consistently shift your work-piece when carving or in many other general woodworking applications. It allows you to quickly shift and adjust your work with its quick clamping and quick release design.

Features:

• Made from solid ductile iron
• 7" reach, 16-1/2" in overall length with a 7/8" diameter shank
• Works in 15/16" holes and sets up in seconds
• Quickly make adjustments to your stock

Includes:

• 1 ea. Fulton Work Bench Holdfast

Made from Solid Ductile Iron

The Large Fulton holdfast is made from solid ductile iron for extended shop use and has a 7" throat, 7/8” round shank and it measures 16-1/2” in total length.

Easy to Use

The large holdfast is easy to use, simply insert the shank into a 15/16" workbench hole with the holdfast positioned over your work piece and with a mallet, give the top of the clamp a solid hit on top of the shank. When you need to release the holdfast, strike the backside of the holdfast to knock it loose.

Unique Hooked Profile

The holdfast has a unique hooked profile which will allow you to hold down work pieces that normally could be challenging. Woodworking applications like routing, sanding, carving or finishing can all be accomplished using the holdfast.

Close

• Made from solid ductile iron
• 7" reach, 16-1/2" in overall length with a 7/8" diameter shank
• Works in 15/16" holes and sets up in seconds
• Quickly make adjustments to your stock

Aluminum Hold Downs

The Hold Down Clamp slides in the T-Track and quickly secures with the turn of the knob. By turning the clamp head 180° to the work piece, the clamp offers a dual capacity of 0" to 2” on one side and 0” to 3” on the other side. Once the track is installed on your router table or drill press table, you can utilize these hold downs for maximum holding pressure.

#1145 - 1/4" Aluminum Hold Down:

• Used with Mini T-Track
• Uses 1/4" x 20 tpi Bolt & Knob

#1146 - 3/8" Aluminum Hold Down:

• Used with HD T-Track
• Uses 3/8" x 16 tpi Bolt & Knob

PVC Tipped Aluminum Hold Downs

These PVC Tipped Hold-Down Clamps feature non-marring PVC tips that are the perfect tool for working with softer woods, finished surfaces or any stock that needs to kept in place. The PVC also gives you more gripping power when pressure is applied to your stock. This prevents slipping and walking of your wood especially when drilling on a drill press. Our PVC tipped hold downs come with hardware and are available in the two commonly used sizes of 1/4" x 20 and 3/8 x 16.

#1162 - 1/4" PVC Tipped Aluminum Hold Down:

• Used with Mini T-Track
• Uses 1/4" x 20 tpi Bolt & Knob

#1163 - 3/8" PVC Tipped Aluminum Hold Down:

• Used with HD T-Track
• Uses 3/8" x 16 tpi Bolt & Knob

Cam Action Hold Down Clamp

Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Our exclusive cam clamps will solve your problem and give you a quick release for all of your jigs and fixtures. Cam clamps come with a standard 3” long hex head bolt that works with our T-track, or you can swap it with a bolt from one of your own jigs. Each cam will exert up to 400 pounds, depending on how you set it.
›See more product details

×

Cam Action Hold Down Clamp

Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences.

Features:

• Each cam will exert up to 400 pounds, depending on how you set it.
• Clamp body is made out of aluminum
• Measures approximately 1-1/2” long
• Standard 3” long hex head bolt that works with most standard sizes of t-track

Quick Release Clamping

Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place.

Works With Most Standard Sizes of T-Track

The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in.

Available in 1/4" 5/16” and 3/8” Hex Head Bolt Sizes

The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations. For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it.

Each Size Sold Separately

Close

Features:

• Each cam will exert up to 400 pounds, depending on how you set it.
• Clamp body is made out of aluminum
• Measures approximately 1-1/2” long
• Standard 3” long hex head bolt that works with most standard sizes of t-track

Available in three sizes:

• 1/4" x 20 tpi
• 5/16" x 18 tpi
• 3/8" x 16 tpi

T-Track Hold Down

These t-track hold down clamps are designed to work with our T-Track opening for either 3/8" or 1/4" sizes. The bottom of the clamp slides neatly into your t-track slot, and is adjustable to anywhere along the track. The clamp is fitted with a 2-3/8” brass foot for excellent holding power. The clamping capacity is approx. 2-1/8”. This package is available in packs of two in 1/4” or 3/8" sizes.

Features:

• Designed to work with our T-Track opening for either 3/8" or 1/4" sizes
• Fitted with a 2-3/8” brass foot for excellent holding power
• Clamping capacity is approx. 2-1/8”
• Available in packs of two in 1/4” or 3/8" sizes.

#2989 - 1/4" T-Track Hold Down:

• Used with Mini T-Track

#2990 - 3/8" T-Track Hold Down:

• Used with HD T-Track

Note: T-Track & Drill Press Table not Included.

Mini Toggle T-Track Hold Down

This toggle is perfect solution for holding light duty stock in place along a fence. Simply attach to a T-slot track, move it into position and secure. the extra long bolt comes with the toggle allows you to secure your stock well below the top of your fence.The finger tighten nut allows you to position the toggle anywhere along your fence and easily secure. The mini T-Track Hold Down provides up to 35 lbs of holding pressure on your stock and has a rubber tip to prevent marring. The large 2" Bolt allows you to adjust vertically to compensate for different size stock.

Features:

• Up to 35 lbs holding pressure
• Large 2" bolt for your vertical adjustment
• Small in size, perfect for fence systems

Drill Press Clamps

This Drill Press Clamp adjusts quickly and easily to lock your work piece in any position. The clamping pad pivots to conform to any work piece, ensuring uniform pressure. Table top must have hole through slots. The clamps are like vise grips, so it insures that when applied the grip is secure.

Features:

• Adjusts quickly and easily
• Lock your work piece in any position
• clamping pad pivots to conform to any work piece, ensuring uniform pressure
• Secure grip

Comes in three sizes:

• 6" Long with 1-1/2" Capacity
• 10" Long with 3" Capacity
• 12" Long with 5" Capacity