Made from 3/32” thick galvanized steel, this clamp rack is specifically designed for safe storage of bar-type clamps when not in use. Pre drilled at 16” center, each 2 foot rack holds 12 bar-type clamps and each 4 foot rack holds 24 bar-type clamps. This clamp rack is not designed to hold pipe clamps, quick grip style clamps or any other objects. Clamps not included.

The BIGfoot clamp bar is constructed of super lightweight aluminum for easy handling. Our specially designed base is extra wide for great stability when clamping your stock. An easy to turn handle is raised to clear your work surface so you won't scrape you knuckles while rotating.

The BIGfoot aluminum bar clamp is available in four convenient sizes: 24" - 36" - 48" clamping between clamp jaws.

A new mini version of the popular K Body Clamp. The UniKlamp offers of 11 square inches of jaw surface: clamps flat, round or odd shapes; jaws encased in glue resistant, non-marring polyamide; profiled rail minimizes flexing and bending; Acme thread for smooth action and long life. Jaws reverse to use clamp as a spreader. Clamps exert 550 pounds of pressure. Available in 6"and 12" opening sizes.

Clamping and spreading with the twist of a dial. Reverse the action of the DuoKlamp from clamping to spreading with a simple twist of the mini-dial. This unique feature makes it easy to switch between clamping and spreading without taking the tool apart. The ergonomically shaped handle with pump lever runs parallel to the rail for balanced, safe handling. The pump lever makes it easy to tighten clamping pressure A quick press of the button allows the clamping arm to quickly slide up or down to clamping position. The large jaws made of impact and fracture resistant reinforced polyamide stay parallel to each other. This unique centered jaw configuration facilitates clamping on all four edges as well as the large surface of the jaw.

Soft Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort. I-beam bar reduces flexing and bowing. Larger, heavy duty clutch plates allow for easier release and increase maneuverability of the clamp head, as well as making the clamp even more dependable and durable.

The rail is made of quality steel drawn in a single piece for durability and strength. The U-shape of the rail enables step-over clamping so you can get to those hard-to-reach places.

The sliding arm is made of die-cast zinc. It is light, stable and break-resistant.

• Small and very handy

• Low weight

• Comes with two plastic pressure caps

• Universally applicable

• Soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort
• I-beam bar reduces flexing and bowing 35%
• 5" throat depth

Magnesium jaw, glass-fiber reinforced, polymid lever and world-famous Bessey steel rail - a new generation in clamping! The KliKlamp's ratchet action resists vibration - the perfect clamp around power tools. It also features quick clamping and quick release...on virtually any shape! Perfect for any pressure - from "light as a feather" touch, to the grip of an eagle's talon...always the right pressure - up to 330 lbs!

The unique, patented OMEGA bend increases the spring deflection of this bar clamp. This increased deflection means it takes longer to achieve full clamping force, but it also takes much longer for force to fully release. This allows the clamp to maintain positive pressure longer when vibrations are present, offering greater work safety.

The OMEGA bend allows you to place the clamp absolutely flat to the surface of the work piece. This allows clamping right into the corner of the clamp.

Ergonomic grip handle, a durable comfortable accessory that fits snuggly over the standard steel sliding pin handle.

Our Heavy duty F-clamp is built with a zinc plated steel
bar and cast steel head / jaw. The handle has a soft grip
for more grip and better clamping force. Removable
pads provide grip on work surfaces and reduce work
piece marring. Grooves in the serrated bar allow easier
sliding of moving jaw.

These bar clamps have a 2-1/2” reach and are our most popular regular-duty clamps. Used by homecrafters, cabinetmakers, woodworkers and metalworkers alike, these easy to open and close clamps are suitable for “close quarters” clamping. This clamp features: 2-1/2” clamping reach from edge of bar to center-line of screw 1/4” x 3/4” plated, a round-edge, high-carbon steel bars with 10,000 lbs. psi tensile strength, 3/8” cold-drawn steel screws with smoothly cut U.S.S. threads malleable and/or ductile iron; powder coated orange finish castings. The Multiple-Disc- Clutch holds securely at any point along the steel bar of the clamp.

These light-duty style bar clamps have a 2” reach. Used for light-duty clamping, a workhorse for its size and design. Use in hobby-craft, light-duty woodwork, home-shop and do-it-yourself projects. Features: 2” reach, 5/8” X 3/16” plated bars, round-edge, high-carbon steel. 5/16” cold-drawn steel screws orange baked enamel finish malleable iron castings hardened, plated, high carbon steel multiple-clutch-discs 3/4” diameter swivels, solid maple handle, 2 soft durable plastic pads press fitted and riveted fixed-heads.

New economical Bessey F-Style clutch bar clamps come with cast heads with powder-coated finish to resist corrosion and chipping. Bessey provides a zinc finished rail with a two piece clutch plate system for opening and closing the lower movable jaw. The Bessey clutch clamps are also provided with protective pads on both the top and bottom jaws and come with a comfortable wooden handle.

Mighty Mini is a handy little guy that does the work of a 1-, 2- or 3-inch c-clamp - but nine times faster. Built to lighter specs, it can handle the majority of lighter duty clamping tasks. This clamp features quality cast jaws with a bright drawn steel rail serrated on two sides, an ergonomic grip wood handle, and a protective non-marring cap. There's a 2-inch nominal throat depth.

• A terrific light duty clamping tool
• Bright drawn steel rail
• Large Acme thread
• Ergonomic wood handle
• Large, glue resistant caps
• 4 rail length (max. opening), 2 throat. Provide 330 lbs. of pressure.

Ideal for sheet metal, stainless steel, light-duty work, and woodworking applications, these Bessey clamps are the choice of professionals worldwide. Tradesman bar clamps feature a unique locking device that is permanently molded into a malleable cast-iron sliding arm, eliminating slippage by interlocking with serrations on the rail. These clamps need no clutching action and have a large Acme thread for fast turning. The large-diameter pad surface comes with protective caps that will minimize dimpling of material while protecting the surface while the ergonomically designed wood handle gives you positive strong clamping.

Upgrade your workbench clamps and get the largest clamping surface in the industry!

• Exclusive Design (patent pending)
  Provides precision and power with exact 90 degree
  clamping at up to 1,000 lbs. pressure
  
  
• Precision-Rule™ Measurement System
  (patent pending)
  Provides a consistent setup and quick identification of opening capacity
  
  
• Slide-Glide Trigger (patent pending)
  Makes precise adjustments rapidly
  
  
• Ergonomic SUMOGRIP™ Handle
  Integrated with soft grip for added comfort and increased power
  
  
• Moveable Rail Stand/End Stop
  Helps preset clamping capacity rapidly and accurately
  
  
• Non-marring Composite Resin Jaw Faces
  Glue Resistant in design, ensure even clamping pressure
  
  
• Reversible Clamping
  Movable jaw can easily reverse to be used as a spreader
  
  
• Extended Side Profile
  Allows narrow clamping on the side of the jaw face
  
  
• Acme Thread
  Turns easy without binding
  

Designed to hold two pairs of clamps 90-degrees to each other, the Cross Doc™ Framing Blocks make a once clumsy job simple. Each block has two grooves sized to fit the JET Parallel Jaw Clamp bars but at two different heights. That makes it possible to apply clamping pressure to the ends and sides of the project at the same time. They also allow setting the clamps up perfectly square before gluing the assembly up. Nothing is more aggravating than having a slightly crooked clamp push an assembly out of square.

Each Cross Doc™ Framing Block has holes for screws at the corners for attaching them to a board. They also have a threaded metal insert in the bottom for use with the JET Bench Dogs (Sold Separately).

The Corner Pressure Clamp applies pressure on the sides of your stock to corners together. Both will accept any clamp bar up to 1/4" thick.

With the Perpendicular Pressure Clamp you can apply vertical
downward pressure on your stock to keep it from moving or popping up.

Our parallel-jaw bar clamps are for quick, accurate clamping of panels, cabinet drawers and frameworks. The end stop on the steel bar helps stabilize the clamp during use and detaches to reverse the screw jaw for spreading purposes. The comfortable screw handle is super durable compound material.

These F-clamps have a 2-3/4” reach. Used by home crafter's, cabinet-makers, and woodworkers alike. These easy to open and close clamps are suitable for “close quarters” clamping. The Multiple- Disc-Clutch holds securely at any point along the steel bar of the clamp. Over 500 lbs. of clamping pressure.

The deep throat clamps have a 5” jaw depth for when you need a little extra reach. Heavy duty cast iron jaws. Zinc plated 1-1/8" wide bar for smooth operation. Wooden handle with ACME- type threads for maximum holding power. Over 800 lbs. of clamping pressure.

Every shop needs at least two of this style of clamp. The extra deep throat clamps have a 7” jaw depth for those hard to clamp projects. Heavy duty cast iron jaws. Steel 1/8" thick by 1-1/8" wide bar for smooth operation. Large easy to grip handle with 1/2" ACME- type threads for maximum holding power. Over 1000 lbs. of clamping pressure.

Parallel Clamp Blocks are packaged 4 to a set. They are used with four Parallel clamps (not included) for quick, easy and perfectly square set-up for projects like raised panel doors, entrance doors, cabinets, window frames, picture frames, boxes

Our 4 Way Clamping System applies equal pressure from all four directions (top, bottom, and both sides). Ideal for gluing table tops, shelving, veneer, and laminates. Attach clamps to any length 2 x 2’s with screws provided, set jig and turn handle to tighten. Clamp has plastic pressure pads and two 19-1/2” tail bars of tough plastic with 12 notches to handle a variety of stock widths. Wood is not included.